New EPEL mirror in Slovakia

[Roman Danko (YNET)]

Hi,

we have setup a new mirror, finally we want to make it available for
outside world.

HTTP: http://mirror.ynet.sk/epel
HTTPS: https://mirror.ynet.sk/epel
RSYNC: rsync://mirror.ynet.sk/epel
Sync schedule: Every 6 hrs
Bandwidth: 2-gigabit to SANET(GEANT participant).
Location: Bratislava, Slovakia
Sponsor: OZ Ynet(civic, non-profit organization)
Sponsor URL: https://www.ynet.sk/en/ <http://www.math.princeton.edu/>
IP to authorize: 147.175.189.5
Email contact: mirrors(a)ynet.sk


-- 
S pozdravom

Roman Danko
OZ YNET

[Adrian Reber]

On Tue, Jan 03, 2017 at 08:11:03AM +0100, Roman Danko (YNET) wrote:
>  we have setup a new mirror, finally we want to make it available for
>  outside world.
>  
>  HTTP: http://mirror.ynet.sk/epel
>  HTTPS: https://mirror.ynet.sk/epel
>  RSYNC: rsync://mirror.ynet.sk/epel
>  Sync schedule: Every 6 hrs
>  Bandwidth: 2-gigabit to SANET(GEANT participant).
>  Location: Bratislava, Slovakia
>  Sponsor: OZ Ynet(civic, non-profit organization)
>  Sponsor URL: https://www.ynet.sk/en/ <http://www.math.princeton.edu/>
>  IP to authorize: 147.175.189.5
>  Email contact: mirrors(a)ynet.sk 
Thanks for setting up a mirror. I had a look at your mirrormanager entry
and it is not totally correct.

You have set up three hosts and one is enough for a setup like yours.

You need one Site and one Host. Then add the 'Fedora EPEL' category and
in that category you add your HTTP, HTTPS and RSYNC URLs.

Then it should work.

I also see http://www.math.princeton.edu/ mentioned in the Sponsor URL.
Is that correct?

		Adrian

[Roman Danko]

I've fixed first issue, but i've no idea where is Sponsor URL, which you
mentioning.

Thank's in advance

S pozdravom
Roman Danko

Dňa 03.01.2017 o 10:59 Adrian Reber napísal(a):
>  You need one Site and one Host. Then add the 'Fedora EPEL'
> category and
>  in that category you add your HTTP, HTTPS and RSYNC URLs.
>
>  Then it should work.
>
>  I also see http://www.math.princeton.edu/ mentioned in the Sponsor URL.
>  Is that correct?

[Adrian Reber]

On Tue, Jan 03, 2017 at 01:49:21PM +0100, Roman Danko wrote:
>  I've fixed first issue, but i've no idea where is Sponsor
> URL, which you
>  mentioning. 
In your original mail you had:

'''
Location: Bratislava, Slovakia
Sponsor: OZ Ynet(civic, non-profit organization)
Sponsor URL: https://www.ynet.sk/en/ <http://www.math.princeton.edu/>
IP to authorize: 147.175.189.5
Email contact: mirrors(a)ynet.sk
'''

There you can see: http://www.math.princeton.edu/

Anyway, it doesn't really matter.

Your mirrormanager entry now almost looks correct. You had a typo in the
URL

http://mirror.ynet.sk/epe

instead of

http://mirror.ynet.sk/epel

I added the missing last 'l'. That is fixed. The rsync URL is also not working
and without rsync our crawler needs a very long time to verify your content:

$ rsync rsync://mirror.ynet.sk/epel/
rsync: failed to connect to mirror.ynet.sk (147.175.189.5): Connection refused (111)
rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9]

		Adrian

[Roman Danko (YNET)]

Dňa 04.01.2017 o 9:54 Adrian Reber napísal(a):

>  On Tue, Jan 03, 2017 at 01:49:21PM +0100, Roman Danko wrote:
> > I've fixed first issue, but i've no idea where is Sponsor URL, which you
> > mentioning.
>  In your original mail you had:
>
>  '''
>  Location: Bratislava, Slovakia
>  Sponsor: OZ Ynet(civic, non-profit organization)
>  Sponsor URL: https://www.ynet.sk/en/ <http://www.math.princeton.edu/>
>  IP to authorize: 147.175.189.5
>  Email contact: mirrors(a)ynet.sk
>  '''
>
>  There you can see: http://www.math.princeton.edu/
>
>  Anyway, it doesn't really matter.
>
>  Your mirrormanager entry now almost looks correct. You had a typo in the
>  URL
>
>  http://mirror.ynet.sk/epe
>
>  instead of
>
>  http://mirror.ynet.sk/epel
>
>  I added the missing last 'l'. That is fixed. The rsync URL is also not working
>  and without rsync our crawler needs a very long time to verify your content:
>
>  $ rsync rsync://mirror.ynet.sk/epel/
>  rsync: failed to connect to mirror.ynet.sk (147.175.189.5): Connection refused (111)
>  rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9]
>
>  		Adrian 
Hi,

finally, it is clear to me, the sponsor URL was mistake, because i
inspired by some example submission, which i found on web. Please leave
there only "https://www.ynet.sk/en/"

Thank's for fixing typo in URL

I fixed issue with rsync, not it works like charm

Thank you for your patience

S pozdravom
Roman Danko
OZ YNET

[Adrian Reber]

On Wed, Jan 04, 2017 at 12:46:59PM +0100, Roman Danko (YNET) wrote:
>  Dňa 04.01.2017 o 9:54 Adrian Reber napísal(a):
>  
>  > On Tue, Jan 03, 2017 at 01:49:21PM +0100, Roman Danko wrote:
>  >> I've fixed first issue, but i've no idea where is Sponsor URL, which
> you
>  >> mentioning.
>  > In your original mail you had:
>  >
>  > '''
>  > Location: Bratislava, Slovakia
>  > Sponsor: OZ Ynet(civic, non-profit organization)
>  > Sponsor URL: https://www.ynet.sk/en/ <http://www.math.princeton.edu/>
>  > IP to authorize: 147.175.189.5
>  > Email contact: mirrors(a)ynet.sk
>  > '''
>  >
>  > There you can see: http://www.math.princeton.edu/
>  >
>  > Anyway, it doesn't really matter.
>  >
>  > Your mirrormanager entry now almost looks correct. You had a typo in the
>  > URL
>  >
>  > http://mirror.ynet.sk/epe
>  >
>  > instead of
>  >
>  > http://mirror.ynet.sk/epel
>  >
>  > I added the missing last 'l'. That is fixed. The rsync URL is also not
> working
>  > and without rsync our crawler needs a very long time to verify your content:
>  >
>  > $ rsync rsync://mirror.ynet.sk/epel/
>  > rsync: failed to connect to mirror.ynet.sk (147.175.189.5): Connection refused
> (111)
>  > rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9]
>  >
>  > 		Adrian
>  Hi,
>  
>  finally, it is clear to me, the sponsor URL was mistake, because i
>  inspired by some example submission, which i found on web. Please leave
>  there only "https://www.ynet.sk/en/"
>  
>  Thank's for fixing typo in URL
>  
>  I fixed issue with rsync, not it works like charm 
rsync is still not working:

$ rsync rsync://mirror.ynet.sk/epel/
@ERROR: Unknown module 'epel'
rsync error: error starting client-server protocol (code 5) at main.c(1516)
[Receiver=3.0.9]

		Adrian

[Roman Danko (YNET)]

Dňa 04.01.2017 o 13:57 Adrian Reber napísal(a):
>  rsync is still not working:
>
>  $ rsync rsync://mirror.ynet.sk/epel/
>  @ERROR: Unknown module 'epel'
>  rsync error: error starting client-server protocol (code 5) at main.c(1516)
> [Receiver=3.0.9] 
It's fixed, again some stupid issue. I hope no other problems
will occure

Roman Danko
OZ YNET

[Adrian Reber]

On Wed, Jan 04, 2017 at 02:34:34PM +0100, Roman Danko (YNET) wrote:
>  Dňa 04.01.2017 o 13:57 Adrian Reber napísal(a):
>  > rsync is still not working:
>  >
>  > $ rsync rsync://mirror.ynet.sk/epel/
>  > @ERROR: Unknown module 'epel'
>  > rsync error: error starting client-server protocol (code 5) at main.c(1516)
> [Receiver=3.0.9]
>  It's fixed, again some stupid issue. I hope no other problems will occure 
Looks good. Thanks. You should see clients connecting to your mirror:

$ curl -s
'https://mirrors.fedoraproject.org/mirrorlist?repo=epel-7&arch=x86_64&country=sk'

# repo = epel-7 arch = x86_64 country = SK 
https://mirror.ynet.sk/epel/7/x86_64/
https://ftp.upjs.sk/pub/mirrors/epel/7/x86_64/

		Adrian

[Roman Danko (YNET)]

Dňa 04.01.2017 o 15:23 Adrian Reber napísal(a):
>  Looks good. Thanks. You should see clients connecting to your
> mirror:
>
>  $ curl -s
> 'https://mirrors.fedoraproject.org/mirrorlist?repo=epel-7&arch=x86_64&country=sk'
>
>  # repo = epel-7 arch = x86_64 country = SK 
>  https://mirror.ynet.sk/epel/7/x86_64/
>  https://ftp.upjs.sk/pub/mirrors/epel/7/x86_64/ 
It worked for a while, but currently
i; dont see us on the list anymore.
Could you look at it, please

Roman Danko
OZ YNET

[Adrian Reber]

On Thu, Jan 05, 2017 at 11:01:23AM +0100, Roman Danko (YNET) wrote:
>  Dňa 04.01.2017 o 15:23 Adrian Reber napísal(a):
>  > Looks good. Thanks. You should see clients connecting to your mirror:
>  >
>  > $ curl -s
> 'https://mirrors.fedoraproject.org/mirrorlist?repo=epel-7&arch=x86_64&country=sk'
>
>  > # repo = epel-7 arch = x86_64 country = SK 
>  > https://mirror.ynet.sk/epel/7/x86_64/
>  > https://ftp.upjs.sk/pub/mirrors/epel/7/x86_64/
>  It worked for a while, but currently i; dont see us on the list anymore.
>  Could you look at it, please 
You can look at the log of the crawler in your MirrorManager Host entry.
The result of the crawl looks correct (Last Crawled: 2017-01-05 04:20:27.968708)

There was, however, a run of report_mirror after that (Last Checked In:
2017-01-05 07:46:59.541715). I cannot check the result of that run but I
assume it is configured wrong and your mirror has been marked as not
being up to date.

In a few hours the crawler will check your mirror again and mark it up
to date until you disable it with your report_mirror run. Please have a
look at the result of report_mirror. It tells you how many directories
are up to date.

		Adrian

[Roman Danko (YNET)]

Dňa 05.01.2017 o 14:36 Adrian Reber napísal(a):
>  On Thu, Jan 05, 2017 at 11:01:23AM +0100, Roman Danko (YNET) wrote:
> > Dňa 04.01.2017 o 15:23 Adrian Reber napísal(a):
> >> Looks good. Thanks. You should see clients connecting to your mirror:
> >>
> >> $ curl -s
> 'https://mirrors.fedoraproject.org/mirrorlist?repo=epel-7&arch=x86_64&country=sk'
>
> >> # repo = epel-7 arch = x86_64 country = SK 
> >> https://mirror.ynet.sk/epel/7/x86_64/
> >> https://ftp.upjs.sk/pub/mirrors/epel/7/x86_64/
> > It worked for a while, but currently i; dont see us on the list anymore.
> > Could you look at it, please
>  You can look at the log of the crawler in your MirrorManager Host entry.
>  The result of the crawl looks correct (Last Crawled: 2017-01-05 04:20:27.968708)
>
>  There was, however, a run of report_mirror after that (Last Checked In:
>  2017-01-05 07:46:59.541715). I cannot check the result of that run but I
>  assume it is configured wrong and your mirror has been marked as not
>  being up to date.
>
>  In a few hours the crawler will check your mirror again and mark it up
>  to date until you disable it with your report_mirror run. Please have a
>  look at the result of report_mirror. It tells you how many directories
>  are up to date.
>
>  		Adrian 
I found some misconfiguration of mirrormanager, hopefuly it will be
correct in next synchronization run.

Finaly, I would like to ask for change in comment(sponzor field) to
"www.ynet.sk/en/"

Thanks

Roman Danko
OZ YNET

[Adrian Reber]

On Thu, Jan 05, 2017 at 02:59:31PM +0100, Roman Danko (YNET) wrote:
>  Dňa 05.01.2017 o 14:36 Adrian Reber napísal(a):
>  > On Thu, Jan 05, 2017 at 11:01:23AM +0100, Roman Danko (YNET) wrote:
>  >> Dňa 04.01.2017 o 15:23 Adrian Reber napísal(a):
>  >>> Looks good. Thanks. You should see clients connecting to your mirror:
>  >>>
>  >>> $ curl -s
> 'https://mirrors.fedoraproject.org/mirrorlist?repo=epel-7&arch=x86_64&country=sk'
>
>  >>> # repo = epel-7 arch = x86_64 country = SK 
>  >>> https://mirror.ynet.sk/epel/7/x86_64/
>  >>> https://ftp.upjs.sk/pub/mirrors/epel/7/x86_64/
>  >> It worked for a while, but currently i; dont see us on the list anymore.
>  >> Could you look at it, please
>  > You can look at the log of the crawler in your MirrorManager Host entry.
>  > The result of the crawl looks correct (Last Crawled: 2017-01-05 04:20:27.968708)
>  >
>  > There was, however, a run of report_mirror after that (Last Checked In:
>  > 2017-01-05 07:46:59.541715). I cannot check the result of that run but I
>  > assume it is configured wrong and your mirror has been marked as not
>  > being up to date.
>  >
>  > In a few hours the crawler will check your mirror again and mark it up
>  > to date until you disable it with your report_mirror run. Please have a
>  > look at the result of report_mirror. It tells you how many directories
>  > are up to date.
>  >
>  > 		Adrian
>  I found some misconfiguration of mirrormanager, hopefuly it will be
>  correct in next synchronization run.
>  
>  Finaly, I would like to ask for change in comment(sponzor field) to
>  "www.ynet.sk/en/" 
You should be able to change it yourself.

		Adrian