can't activate wireless
by Jim
when i try to activate my wireless card i get this
Error for wireless request "Set Bit Rate" (8B20) :
SET failed on device eth1 ; Operation not supported.
Determining IP information for eth1...
Specs
intel 2200bg wireless
--
James Lawrence
Rochester NY
19 years, 5 months
PalmOne Treo 600 Support
by Rich
Does anyone know how to get the Treo 600 working via USB with FC3? I have tried using the software in FC3 with no luck.
Rich
19 years, 5 months
Re: Network Printer - Help too please
by tonydm
Terry Polzin wrote:
> On Thursday December 30 2004 20:46, tonydm wrote:
>
>
>> Hi all,
>>
>> I too have a network printer problem. I cannot seem to get a printer
>> configured and work. All of my windoze boxes print to the print server
>> fine. Before taking FC3 for a test drive, I had Mandrake 10 installed.
>> Configured a printer no problem. Was printing in minutes.
>>
>> Intel NetportExpress 10/100 - ip 172.16.0.100
>> HP Laserjet 4000
>>
>> 1) what to I need to enable (protocol) on the print server?
>> 2) what kind of network printer type (CUPS-IPP, UNIX-LPD, WINDOWS-SMB,
>> etc), do I need to setup?
>> 3) can I use the default hplj4000 postscript driver? The screen says
>> "recommended"
>>
>
> system-config-printer
>
> select networked jetdirect as quque type
> run this command as root.
>
>
Printer is online!! :)
But I feel like such an idiot. I don't recall setting up the printer
with Jetdirect under Mandrake. I did recall directing it to the ip
address at port 9100. My problem was I was trying to set it up with
everything EXCEPT Jetdirect under FC3. I thought "it couldn't be this
because I don't have a Jetdirect server". Thanks for the education.
tonydm
19 years, 5 months
How to Set Workspace in Session Startup of OpenOffice.org, Firefox, Thunderbird
by Schlaegel
I want my session to include OpenOffice.org on one workspace, Firefox on
another, and Thunderbird on yet another. Unfortunately, gnome-session
says "these windows do not support 'save current setup'...". I was still
able to add them to my session through the "Startup Programs" tab in
gnome-session, but I see no way to specify the workspace to start in.
Is there a way, with the programs included with Fedora Core 3, to start
these applications on a specific workspace. I assumed there was a cli
program to set the workspace, but found none.
19 years, 5 months
if you have this kinda setup maybe you can help me:)
by zomorf
Hi All,
If you have this kinda setup and have a little patience in helping one,
one would be greatful...
I have 2 HD's 80g for xp and 40g for fedora... don't care which or will
have fedora or xp so if it's easier too have fedora on hda and xp on hdb
then so be it... But if anyone can help that'd be great... have tried
almost every combination but for some reason can't get both too
recognise one way or the other...
Lata,
zomorf
19 years, 5 months
packages list and some version.
by Rakotomandimby (R12y) Mihamina
Hello,
I havent got Fedora Core 2 installed yet, but want to now the versions
of some default installed packages before:
- kernel
- Apache
- MySQL
- php
- expat
- swish-e
- (what's) the default MTA of Fedora (?)
- (what's) the default IMAP server of Fedora (?)
and their dependancies
If I had Fedora installed, I could have just done a 'yum list | grep
<the_soft>'. But what if I want to know before ?
Thank you for your help.
--
ASPO Infogérance http://aspo.rktmb.org/activites/infogerance
Unofficial FAQ fcolc http://faq.fcolc.eu.org/
LUG sur Orléans et alentours.
Tél : 02 38 76 43 65 (France)
19 years, 5 months
yum horror
by korgull
Hi,
When trying yum with ATrpms, I find that dependencies get not resolved and
this makes yum almost unusable.
Is there a fix ?
Regards,
Marcel
19 years, 5 months
FC3 tulip Netgear FA310TX bug apparently fixed
by Charles Curley
Old drivers for this device were showing each pair of bytes swapped in
the MAC address of one of my Ethernet cards.
What I see now is 00:02:E3:09:73:C0. What I used to see is
02:00:09:E3:C0:73. The difference came today, when I upgraded the box
from FC2 to FC3.
The "new" MAC address is consistent with a sticker on the card, so I
guess it is the correct one. Also, it agrees with what Windows 9x
reported when I used this card in a W9x box. Apparently FC3 has
cleared up a bug that the driver has had for several years.
Does anyone have a list of Ethernet vendor IDs they can check against
this MAC address? That should tell for sure which is correct.
[root@jhereg ~]# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:02:E3:09:73:C0
inet addr:192.168.1.14 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::202:e3ff:fe09:73c0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1806 errors:4 dropped:0 overruns:0 frame:0
TX packets:1913 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:172615 (168.5 KiB) TX bytes:1524197 (1.4 MiB)
Interrupt:10 Base address:0xc000
From LSPCI:
00:0d.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
Subsystem: Netgear FA310TX
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at b000 [size=256]
Memory at d7801000 (32-bit, non-prefetchable) [size=256]
lsmod reports the tulip driver present.
I am putting this on the list so that anyone else who uses this (or a
similar) card won't be caught and surprised as I was.
--
Charles Curley /"\ ASCII Ribbon Campaign
Looking for fine software \ / Respect for open standards
and/or writing? X No HTML/RTF in email
http://www.charlescurley.com / \ No M$ Word docs in email
Key fingerprint = CE5C 6645 A45A 64E4 94C0 809C FFF6 4C48 4ECD DFDB
19 years, 5 months
