F14 - 4 min delay on shutdown
by Genes MailLists
As of a few weeks back I started getting very slow shutdowns ...
Anyone else seeing this or got some color on the problem ?
here's what seems to be happening:
shutdown ..
network goes offline
ntpd asks for an update (looks like it traps the kill -15 ..
and stays up trying to clean up )
named times out .. and gets error .. wont shutdown cleanly
(it has received a kill -15 which it has trapped)
named waits trying to clean up - cannot clean up coz network is down.
ntpd finally exits (and stops nagging named)
delay of shutdown now about 4 mins .. .
eventually named gets killed harder harder (and finally exits)
gene/
====================== messages =======================
Mar 31 06:55:38 lap1 ntpd[2767]: 192.5.41.41 interface 10.10.10.70 ->
(null)
Mar 31 06:55:43 lap1 avahi-daemon[1467]: Got SIGTERM, quitting.
Mar 31 06:55:43 lap1 avahi-daemon[1467]: Leaving mDNS multicast
group on
interface virbr0.IPv4 with address 192.168.122.1.
Mar 31 06:55:43 lap1 avahi-daemon[1467]: avahi-daemon 0.6.27 exiting.
Mar 31 06:55:43 lap1 ntpd[2767]: ntpd exiting on signal 15
Mar 31 06:55:43 lap1 ntpd[1546]: ntpd 4.2.6p3-RC10(a)1.2239-o
Thu Nov 25 16:18:33 UTC 2010 (1)
Mar 31 06:55:43 lap1 ntpd[1549]: proto: precision = 0.839 usec
Mar 31 06:55:43 lap1 ntpd[1549]: 0.0.0.0 c01d 0d kern kernel time
sync enabled
Mar 31 06:55:43 lap1 ntpd[1549]: Listen and drop on 0 v4wildcard
0.0.0.0 UDP 123
Mar 31 06:55:43 lap1 ntpd[1549]: Listen and drop on 1 v6wildcard
:: UDP 123
Mar 31 06:55:43 lap1 ntpd[1549]: Listen normally on 2 lo 127.0.0.1
UDP 123
Mar 31 06:55:43 lap1 ntpd[1549]: Listen normally on 3 virbr0
192.168.122.1 UDP 123
Mar 31 06:55:43 lap1 ntpd[1549]: Listen normally on 4 wlan0
fe80::21f:3bff:fe27:f3c5 UDP 123
Mar 31 06:55:43 lap1 ntpd[1549]: Listen normally on 5 lo ::1 UDP 123
Mar 31 06:55:43 lap1 ntpd[1549]: Listening on routing socket on fd #22
for interface updates
Mar 31 06:55:44 lap1 named[1483]: error (network unreachable)
resolving 'tock.usno.navy.mil/AAAA/IN': 10.10.10.63#53
Mar 31 06:55:44 lap1 named[1483]: error (network unreachable)
resolving 'charon.nofs.navy.mil/A/IN': 10.10.10.63#53
... (loads of similar errors)
Mar 31 06:55:49 lap1 named[1483]: error (network unreachable)
resolving 'i.root-servers.net/AAAA/IN': 2001:dc3::35#53
Mar 31 06:55:49 lap1 named[1483]: error (network unreachable)
resolving 'l.root-servers.net/AAAA/IN': 2001:500:1::803f:235#53
Mar 31 06:55:49 lap1 ntpd[1549]: ntpd exiting on signal 15
Mar 31 06:55:49 lap1 named[1483]: received control channel command
'stop'
Mar 31 06:55:49 lap1 named[1483]: shutting down: flushing changes
Mar 31 06:55:49 lap1 named[1483]: stopping command channel on
127.0.0.1#953
Mar 31 06:55:49 lap1 named[1483]: stopping command channel on
::1#953
Mar 31 06:55:49 lap1 named[1483]: no longer listening on
127.0.0.1#53
Mar 31 06:56:13 lap1 dnsmasq[1991]: no servers found in
/etc/resolv.conf, will retry
==================================================================
13 years, 2 months
R: Re: R: Re: R: Re: Plotter Hp Designjet T770
by antonio montagnani
>----Messaggio originale----
>Da: hobbes1069(a)gmail.com
>Data: 31-mar-2011
19.57
>A: "Community support for Fedora users"<users(a)lists.fedoraproject.org>
>Ogg: Re: R: Re: R: Re: Plotter Hp Designjet T770
>
>On Thu, Mar 31, 2011 at 5:
38 AM, Mogens Kjaer <mk(a)lemo.dk> wrote:
>> On 03/31/2011 12:14 PM, antonio.
montagnani(a)alice.it wrote:
>> ...
>>>> From the website of HP:
>>>
>>> http://hplipopensource.com/hplip-web/release_notes.html>>> That plotter
should be
>>> natively supported by latest Hplip.
>>>
>>> What are we missing??
>>
>> You are missing the "ps".
>>
>> The T770ps printer is a T770 printer with
an additional postscript option.
>
>Assuming that system-config-printer is
automagically finding the
>postscript driver...
>
>I just looked through the
available printers and it doesn't appear to
>have a non-ps driver for that
particular model. You might try using
>one of the other non-ps drivers and see
if it works well enough for
>your needs.
>
>Richard
>--
Bug 692432 - Plotter
HP Deskjet T770 is not printing
I filed a bug as I think that it should work
out of the box, as it is included in hplip, as also per HP note on latest
hplip.
It is not urgent as plotter is a network plotter in an office where I am
working as consultant (but not an IT consultant)
Rgds
Anonio
13 years, 2 months
R: Re: R: Re: Plotter Hp Designjet T770
by antonio montagnani
>----Messaggio originale----
>Da: twaugh(a)redhat.com
>Data: 31-mar-2011 11.44
>A: "antonio.montagnani(a)alice.it"<antonio.montagnani(a)alice.it>, "Community
support for Fedora users"<users(a)lists.fedoraproject.org>
>Ogg: Re: R: Re:
Plotter Hp Designjet T770
>
>On Thu, 2011-03-31 at 09:08 +0200, antonio.
montagnani(a)alice.it wrote:
>> Fedora finds the following driver:
>> HP
Designjet T770ps 44in
>
>That's HP own PostScript-based driver. However, from
the look of the
>specifications it actually speaks HP-GL/2 natively but not
PostScript.
>Perhaps there is an optional PostScript module for that printer?
>
>Tim.
>*/
>From the website of HP:
http://hplipopensource.com/hplip-web/release_notes.html
That plotter should be
natively supported by latest Hplip.
What are we missing??
Antonio
13 years, 2 months
My DVD reader doesn't always load....
by DB
Hi all,
I appear to have a problem with my DVD reader (Gigabyte Technology 16x16
DVD rw/r). When I put a dvd in the tray, sometimes the DVD title comes
up in the "recent device" window, sometimes nothing. When "nothing"
comes up, sometimes the tray is locked & I can't get the disc out again.
I have a pair of DVDs, produced in Germany, one plays, the other
doesn't.....
If the disc loads, sometimes I can play it with Kaffeine, sometimes I
have to use Bangarang, because Kaffeine doesn't see any start point on
the disc.....
Then one time, Bangarang plays one disc; when I try to play a second one
it crashes....
Anyone got any suggestions on how to try and debug this little lot?????
As ever, many thanks for any help you can give me!!!!
Cheers
Dave
uname -ar
Linux Fedora-Blue 2.6.35.11-83.fc14.x86_64 #1 SMP Mon Feb 7 07:06:44 UTC
2011 x86_64 x86_64 x86_64 GNU/Linux
KDE, MSI880GM-e41 with Phenom II X6 1075T
13 years, 2 months
Convert to OGV.
by Lázaro Morales
Hello,
Can someone recommend me an application for convert any video file (.avi,
.mpeg, ...) to OGG or OGV video file? and, Is this application available
in the Fedora Official Repo?
Thanks in advance.
Best regard,
Lázaro.
Este mensaje de correo electrónico ha sido procesado por el servidor de Frioclima
13 years, 2 months
Audio: Mic not working
by Sergio Belkin
I have a problem: mic is not working.
Sound output works fine, but when I use mic, opening pavucontrol with
the volum high, I see that mic receives audio but there is no audible
sound. I've checked the volume with alsamixer and set high all volume
controls and nothing at all!
Mi sound card is:
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High
Definition Audio Controller (rev 02)
Alsa version are:
rpm -qa | grep ^alsa
alsa-tools-firmware-1.0.24.1-1.fc14.i686
alsa-plugins-pulseaudio-1.0.22-1.fc13.i686
alsa-utils-1.0.23-3.fc14.i686
alsa-lib-devel-1.0.24-1.fc14.i686
alsa-lib-1.0.24-1.fc14.i686
alsa-firmware-1.0.24.1-1.fc14.noarch
More info:
gconftool-2 --recursive-list /system/gstreamer/0.10/default
musicaudiosink_description = Default
videosink = autovideosink
visualization = autoaudiosink
audiosink = autoaudiosink
musicaudiosink = autoaudiosink
chataudiosink_description = Default
audiosrc_description = Default
audiosink_description = Default
chataudiosink = autoaudiosink
audiosrc = alsasrc
videosrc = v4l2src
I use Fedora 14 on a netbook ASPIRE one D250
Please could you tell me what I'm missing?
Thanks in advance!
--
--
Sergio Belkin http://www.sergiobelkin.com
Watch More TV http://sebelk.blogspot.com
LPIC-2 Certified - http://www.lpi.org
13 years, 2 months
Need help with rpmbuild
by Steve Blackwell
Specifically the install section. I'm not understanding how the
%install section works with the %files section.
I hope this is not considered OT.
Let's say I want my rpm to install the file "hello"
in /tmp on a target system. The %prep and %build sections work OK and
create my hello file in BUILD/hello-1. (Why BUILD/hello-1 and not just
BUILD I don't know but for now it doesn't matter.)
The install and files sections of my spec file look like this:
(Obviously %{name} is defined as hello)
%install
cp %{name} $RPM_BUILD_ROOT/
%files
%defattr(-,root,root,-)
/tmp/hello
%BuildRoot is defined (by default) to be
%(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX)
What's with the XXXXX?
The cp works as expected but then an error occurs saying:
Extracting debug info ... blah ... blah...
...
error: File not
found: /home/steve/rpmbuild/BUILDROOT/hello-1-1.fc12.i386/tmp/hello
I feel like I'm missing the big picture here.
I'd appreciate any direct help or pointers to some good explanation.
I've read a bunch of docs but they have not helped in this case.
Thanks,
Steve
--
Changing lives one card at a time
http://www.send1cardnow.com
13 years, 2 months
R: Re: Plotter Hp Designjet T770
by antonio montagnani
>----Messaggio originale----
>Da: joe(a)zeff.us
>Data: 31-mar-2011 8.11
>A:
"Community support for Fedora users"<users(a)lists.fedoraproject.org>
>Ogg: Re:
Plotter Hp Designjet T770
>
>On 03/30/2011 10:08 PM, antonio montagnani wrote:
>> if fails to print the test page from Fedora printer window: not sure, I
>>
have to check later, it says unsupported format or alike.
>
>OK. we presume
then that the printer's known to be working and that
>hardware problems aren't
an issue. If nothing else, we've eliminated
>one possibility.
>--
>users
mailing list
>users(a)lists.fedoraproject.org
>To unsubscribe or change
subscription options:
>https://admin.fedoraproject.org/mailman/listinfo/users>Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>
the plotter has no hardware issues, as it has been printing for years, and
I have no network issues as I can print on other networked printers
When I try
to print I read on the plotter screen: unable to manage unknow file format...
Fedora finds the following driver:
HP Designjet T770ps 44in
I was not able to
find the plotter in the openprinting database
I am confused :-)
How to debug
it???
Antonio
13 years, 2 months