booting
by Patrick Dupre
Hello,
After the installation of a new kernel (typically during an update).
There is a change of the file /boot/grub2/grub.cfg.
However, the new menuentry created is not correct.
The new one include
linux /vmlinuz-3.14.2-200.fc20.x86_64 root=/dev/mapper/VolGrpSys_DK1-root
which wrong.
I can change it manually.
I cannot guess where the information is found!
the
set root='lvm/VolGrpSys_DK1-root'
is correct
It does not seem to be in
/etc/grub.d/
It looks like that it takes it from another distribution installed on the
machine, while any of the partition are mounted!
Thank for your help.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 1 month
simple scan 3.10.2, mustek 1200 CU scanner, and the lights are off but somebody's home
by Tim
Does anybody have a scanner that identifies as a Mustek 1200 CU (several
scanners are this, under the hood), they they can try with the simple
scan program?
On my Fedora 20 computer, running the Mate desktop, the scanner light
goes out shortly after it does the little test dance, and it scans the
rest of the page with no lamp on. Yet, if I plug the scanner into a
very old Fedora release, or CentOS, it works normally.
It shouldn't scan unlit, there's no option for it, and it's not a
scanner meant for scanning transparencies.
--
tim@localhost ~]$ uname -rsvp
Linux 3.13.10-200.fc20.i686 #1 SMP Mon Apr 14 21:00:56 UTC 2014 i686
All mail to my mailbox is automatically deleted, there is no point trying
to privately email me, I will only read messages posted to the public lists.
George Orwell's '1984' was supposed to be a warning against tyranny, not
a set of instructions for supposedly democratic governments.
10 years, 1 month
Yum fails to install kernel-devel
by Luke Nath
yum -y update updated more than 11500 packages, because I had not
run updates for quite a while.
Everything installed except for kernel-devel.
So, I downloaded the file directly from
http://mirrors.kernel.org/fedora/updates/20/x86_64/kernel-devel-3.14.2-20...
then I ran yum -y install kernel-devel-3.14.2-200.fc20.x86_64.rpm
Here is the info off the screen:
# yum -y install kernel-devel-3.14.2-200.fc20.x86_64.rpm
Loaded plugins: langpacks, refresh-packagekit
Examining kernel-devel-3.14.2-200.fc20.x86_64.rpm: kernel-devel-3.14.2-200.fc20.x86_64
Marking kernel-devel-3.14.2-200.fc20.x86_64.rpm as an update to kernel-devel-3.11.10-100.fc18.x86_64
Marking kernel-devel-3.14.2-200.fc20.x86_64.rpm as an update to kernel-devel-3.13.6-200.fc20.x86_64
Resolving Dependencies
--> Running transaction check
---> Package kernel-devel.x86_64 0:3.14.2-200.fc20 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
============================================================================================================================
==================================== Package Arch Version
Repository Size
============================================================================================================================
====================================Installing:
kernel-devel x86_64 3.14.2-200.fc20 /kernel-devel-3.14.2-200.fc
20.x86_64 33 M
Transaction Summary
============================================================================================================================
====================================Install 1 Package
Total size: 33 M
Installed size: 33 M
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : kernel-devel-3.14.2-200.fc20.x86_64
Error unpacking rpm package kernel-devel-3.14.2-200.fc20.x86_64
error: unpacking of archive failed: cpio: mkdir
Verifying : kernel-devel-3.14.2-200.fc20.x86_64
Failed:
kernel-devel.x86_64 0:3.14.2-200.fc20
Complete!
#
Here are the sums of the file:
# md5sum kernel-devel-3.14.2-200.fc20.x86_64.rpm
0d6418857d2c6ba112077a102d41d89e kernel-devel-3.14.2-200.fc20.x86_64.rpm
# sha512sum kernel-devel-3.14.2-200.fc20.x86_64.rpm
39ccd42b2ff94e941dd75071004dc73011e98c8b092290f84d5c861c6b1614c1ca7c4d0fea3e13fd155f91bb2d6f2b47bc53c5c909f27aff607f54746acd
77be kernel-devel-3.14.2-200.fc20.x86_64.rpm
10 years, 1 month
remmina
by Patrick Dupre
Hello,
I was trying to terminate (logout or close) a remmina-vnc session,
not just disconnect!
When I reconnect, I wish to start a brand new session.
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 1 month
Re: system-config-services
by Patrick Dupre
Sorry,
I found the issue:
iptables -I INPUT 1 -p tcp --dport 5901 -j ACCEPT
ces
>
> Hello,
>
> I am lost again!!!
> I cannot open the port:
>
> 5900/tcp closed vnc
> 5901/tcp closed vnc-1
> 5902/tcp closed vnc-2
> 5903/tcp closed vnc-3
> or
> from localhost:
> 5900/tcp closed vnc
> 5901/tcp filtered vnc-1
> 5902/tcp closed vnc-2
> 5903/tcp closed vnc-3
>
>
> while
> Using firewall-config, I check vncserver bot permanent and runtime,
> Do I need to do something else?
>
> systemctl status vncserver
> vncserver.service
> Loaded: not-found (Reason: No such file or directory)
> Active: inactive (dead)
>
> systemctl start vncserver
> Failed to issue method call: Unit vncserver.service failed to load: No such file or directory.
>
> one the server, I did vncserver and open :1
>
> Both machines are on the same network
> vncviewer fails error 111 (unable to connect to socket)
> remmina-vnc fails too (it ass the ssh password and sleep!)
>
> It looks like to that I am not able to reopen this port, while it has works!!!!!
> I am missing one point:
>
> Both dbus.service and .socket are active without error
>
> Sorry for my incompetence!
>
> >
> > On 05/03/14 02:42, Patrick Dupre wrote:
> > > Hello,
> > >
> > > When I reun system-config-services, I get
> > >
> > > ERROR:dbus.proxies:Introspect error on :1.980:/org/fedoraproject/Config/Services/ServiceHerders/XinetdServiceHerder: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
> > >
> > >
> > > I checked:
> > > systemctl status dbus.service
> > > systemctl status dbus.socket
> > >
> > > But there are active.
> > >
> > > What is wrong?
> >
> > Well, you checked them....they are "active" .... but there are errors...
> >
> >
> > systemctl status dbus.service
> > dbus.service - D-Bus System Message Bus
> > Loaded: loaded (/usr/lib/systemd/system/dbus.service; static)
> > Active: active (running) since Thu 2014-05-01 18:30:32 CEST; 6h ago
> > Main PID: 965 (dbus-daemon)
> > CGroup: /system.slice/dbus.service
> > ├─ 965 /bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
> > ├─4753 /usr/bin/python /usr/share/system-config-services/system-config-services-mechanism.py
> > └─4755 /usr/libexec/gam_server
> >
> > May 02 01:24:44 Homere dbus-daemon[965]: follow_name_owner_changes=follow_name_owner_changes)
> > May 02 01:24:44 Homere dbus-daemon[965]: File "/usr/lib/python2.7/site-packages/dbus/proxies.py", line 248, in __init__
> > May 02 01:24:44 Homere dbus-daemon[965]: self._named_service = conn.activate_name_owner(bus_name)
> > May 02 01:24:44 Homere dbus-daemon[965]: File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 175, in activate_..._owner
> > May 02 01:24:44 Homere dbus-daemon[965]: return self.get_name_owner(bus_name)
> > May 02 01:24:44 Homere dbus-daemon[965]: File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 361, in get_name_owner
> > May 02 01:24:44 Homere dbus-daemon[965]: 's', (bus_name,), **keywords)
> > May 02 01:24:44 Homere dbus-daemon[965]: File "/usr/lib/python2.7/site-packages/dbus/connection.py", line 651, in ca...ocking
> > May 02 01:24:44 Homere dbus-daemon[965]: message, timeout)
> > May 02 01:24:44 Homere dbus-daemon[965]: DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply....roken.
> > Hint: Some lines were ellipsized, use -l to show in full.
> >
> > You'll need to investigate that....
> >
> > --
> > Do not condemn the judgment of another because it differs from your own. You may both be wrong. -- Dandemis
> > --
> > users mailing list
> > users(a)lists.fedoraproject.org
> > To unsubscribe or change subscription options:
> > https://admin.fedoraproject.org/mailman/listinfo/users
> > Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> > Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> > Have a question? Ask away: http://ask.fedoraproject.org
>
>
> ===========================================================================
> Patrick DUPRÉ | | email: pdupre(a)gmx.com
> Laboratoire de Physico-Chimie de l'Atmosphère | |
> Université du Littoral-Côte d'Opale | |
> Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
> 189A, avenue Maurice Schumann | | 59140 Dunkerque, France
> ===========================================================================
> --
> users mailing list
> users(a)lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 1 month
packages
by Patrick Dupre
Hello,
I made the following packages because they either do not existed
or because they were wrong.
I can donate them to the community if it make sense.
perl-Chart-Clicker-2.88-1.fc20.noarch.rpm
perl-Chart-GRACE-0.95-1.fc20.noarch.rpm
perl-Color-Scheme-1.06-1.fc20.noarch.rpm
perl-define-1.02-1.fc20.noarch.rpm
perl-Forest-0.10-1.fc20.noarch.rpm
perl-Geometry-Primitive-0.24-1.fc20.noarch.rpm
perl-Graphics-Color-0.29-1.fc20.noarch.rpm
perl-Graphics-Primitive-0.65-1.fc20.noarch.rpm
perl-Graphics-Primitive-Driver-Cairo-0.46-1.fc20.noarch.rpm
perl-Layout-Manager-0.35-1.fc20.noarch.rpm
perl-Math-Function-Roots-0.065-1.fc20.noarch.rpm
perl-Math-Integral-Romberg-0.04-1.fc20.noarch.rpm
perl-Sort-Fields-0.90-1.fc20.noarch.rpm
perl-String-Scanf-2.1-1.fc20.noarch.rpm
perl-Text-Flow-0.01-1.fc20.noarch.rpm
perl-Tk-FontDialog-0.17-1.fc20.noarch.rpm
perl-Tk-LineGraphDataset-0.01-1.fc20.noarch.rpm
perl-Tk-PlotDataset-2.04-1.fc19.noarch.rpm
system-config-lvm-1.1.18-1.fc20.noarch.rpm
perl-Math-GSL-0.27-1.fc20.x86_64.rpm
perl-PDL-Graphics-PLplot-0.67-1.fc20.x86_64.rpm
perl-PDL-LAPACK-0.12-1-1.fc20.x86_64.rpm
perl-PDL-LinearAlgebra-0.08-1.fc20.x86_64.rpm
perl-tk-zinc-3.303-1.fc20.x86_64.rpm
The i686 versions are also available.
There are running fine, however, 1 or 2 may require to be installed
with rpm and the --nodeps option. This is not clear why, because the
packages are already installed!
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 1 month
yum update
by Patrick Dupre
Hello,
When I update fedora 20, I get a glitch with some packages of fedora 21!
Should I remove rpmfusion-free-rawhide?
Packages skipped because of dependency problems:
ffmpeg-libs-2.2.1-1.fc21.x86_64 from rpmfusion-free-rawhide
x264-libs-0.142-4.20140423gite260ea5.fc21.x86_64 from rpmfusion-free-rawhide
I also had to remove vlc!
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 1 month
system-config-services
by Patrick Dupre
Hello,
When I reun system-config-services, I get
ERROR:dbus.proxies:Introspect error on :1.980:/org/fedoraproject/Config/Services/ServiceHerders/XinetdServiceHerder: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
I checked:
systemctl status dbus.service
systemctl status dbus.socket
But there are active.
What is wrong?
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 1 month
bitcoin miner
by Paul Cartwright
I have been reading about bitcoins lately & thought I would install &
look at it. from the bitcoin.org web site I tried to install every miner
program they showed, without success. always dependency issues or
errors. Is there a bitcoin miner program that works for fedora 20 amd_64??
--
Paul Cartwright
Registered Linux User #367800 and new counter #561587
10 years, 1 month
fail2ban on fc20
by David Mehler
Hello,
Is anyone running fail2ban on fc20 with firewalld? I'm trying to get
this working and finding a lot of bug reports on this but not an rpm
that goes out of the box.
I'd prefer not to have to revert to iptables but I want to stop brute
force attempts.
Thanks.
Dave.
10 years, 1 month
