[fedora-arm] Cross-compiler settings for rpmbuild
Kedar Sovani
kedars at marvell.com
Mon May 3 08:20:31 UTC 2010
msalter had tried to build these within koji.
Here is the link:
http://people.redhat.com/msalter/crossbuild/
I think you need to install the cross-rpm-config and patches to
yum/mock.
Kedar.
On Sat, 2010-05-01 at 00:51 -0700, Shakthi Kannan wrote:
> Hi,
>
> The hardware device I use for testing is armv4, while the pre-built
> rootfs is armv5. I have a custom toolchain which I would like to use
> to build the packages from .src.rpm. How can I achieve that with the
> rpmbuild process? I don't have an option of building on the target
> hardware.
>
> 1. If I would like to cross-compile, what should be the BuildArch?
>
> 2. Where can I set the cross-compiler settings, for example:
>
> %__cc /usr/local/arm/3.4.3/bin/arm-none-linux-gnueabi-gcc
> %__cpp /usr/local/arm/3.4.3/bin/arm-none-linux-gnueabi-g++
> %__cxx /usr/local/arm/3.4.3/bin/arm-none-linux-gnueabi-g++
> %__ld /usr/local/arm/3.4.3/bin/arm-none-linux-gnueabi-ld
> %__nm /usr/local/arm/3.4.3/bin/arm-none-linux-gnueabi-nm
> %__objcopy /usr/local/arm/3.4.3/bin/arm-none-linux-gnueabi-objcopy
> %__objdump /usr/local/arm/3.4.3/bin/arm-none-linux-gnueabi-objdump
> %__ranlib /usr/local/arm/3.4.3/bin/arm-none-linux-gnueabi-ranlib
> %__strip /usr/local/arm/3.4.3/bin/arm-none-linux-gnueabi-strip
>
> I see that /usr/lib/rpm has lot of configuration files and settings,
> and /usr/lib/rpm/platform is for native builds?
>
> Appreciate any inputs in this regard,
>
> Thanks!
>
> SK
>
More information about the arm
mailing list