[fedora-arm] Fwd: Stable kernel 2.6.37.6 for Fedora on Toshiba AC100 and Question

[intersolar-direct]

-------- Пересылаемое сообщение  --------
06.08.2011, 01:48, "intersolar-direct" <intersolar-direct at yandex.ru>:

You can download kernel sources  for Toshiba AC100 here http://gitorious.org/~marvin24/ac100/marvin24s-kernel
now .38 is last kernel

06.08.2011, 00:26, "Gordan Bobic" <gordan at bobich.net>:

>  Hmm, I've had a look around on the link you provided but I can't find
>  the kernel sources anywhere. Can you post a link to the sources and/or
>  patches that make it work on the AC100?
>
>  Gordan
>
>  On 05/11/2011 06:54 PM, intersolar-direct wrote:
>>   Sorry for delay. We have new, stable kernel 2.6.37.6
>>   Input devices works correctly, work Wireless & 3G & more stuff. Its
>>   build w/o sound & uncorrectly sleep (suspend).
>>   About Fedora on Toshiba AC100. We have launch new kernel 2.6.37 w.
>>   Fedora ARM13
>>   This guide for install Fedora ARM on Toshiba AC100 2.6.37
>>   http://www.pole.su/Toshiba-AC100-Fedora-2.6.37-install-ENG.htm
>>   if we change one string, we install Fedora onToshiba AC100 well:
>>   This string:
>>   wget http://ac100.gudinna.com/tegra-rootfs.tgz
>>   tar xvf tegra-rootfs.tgz --numeric-owner -C /mnt/mmc tar xvf
>>   tegra-rootfs.tgz - numeric-owner-C / mnt / mmc
>>   need change to:
>>   wget http://ausil.us/smartbook/smartbook-rootfs-f13.tar.bz2
>>   tar xvf smartbook-rootfs-f13.tar.bz2 --numeric-owner -C /mnt/mmc tar xvf
>>   smartbook-rootfs-f13.tar.bz2 - numeric-owner-C / mnt / mmc
>>   We use Fedora rootfs from Genesi Smartbook. But we have little problem -
>>   FSTAB seeking rootfs in different place - mmcblk1p2
>>   Where need to change for FSTAB seeking rootfs in right place - mmcblk0p1 ?
>>   2. Two testing - new rootFS from this
>>   http://fedoraproject.org/wiki/Architectures/ARM/F13-ARM-Beta2 (little hint)
>>   If we use new rootfs from this -
>>   http://scotland.proximity.on.ca/fedora-arm/beta/f13/rootfs-f13-beta3-2011-05-10.tar.bz2
>>   from 11-May-2011 10:52 116M - all working, but only comand prompt (NO
>>   GUI). Its requered this comand (for working wireless internet):
>>   apt-get install wpasupplicant
>>   apt-get install aptitude
>>   modprobe rt2800usb
>>   wpa_passphrase ssid password > /etc/wpa_supplicant/ssid.conf
>>   wpa_supplicant -c /etc/wpa_supplicant/ssid.conf -i wlan0 -D wext
>>   after that (download & start GNOME)
>>   apt-get install gnome
>>   apt-get install xorg
>>
>>   startx
>>   --------
>>   Good luck
>>
>>   _______________________________________________
>>   arm mailing list
>>   arm at lists.fedoraproject.org
>>   https://admin.fedoraproject.org/mailman/listinfo/arm
-------- Завершение пересылаемого сообщения --------