[fedora-arm] Stable kernel 2.6.37.6 for Fedora on Toshiba AC100 and Question
Gordan Bobic
gordan at bobich.net
Fri Aug 5 21:49:43 UTC 2011
Thanks for the hint. I just spoke to Marvin on IRC and he pointed me at
it. Much appreciated. :)
Gordan
On 08/05/2011 10:48 PM, intersolar-direct wrote:
> You can download kernel sources for Toshiba AC100 here http://gitorious.org/~marvin24/ac100/marvin24s-kernel
> now .38 is last kernel
>
>
> 06.08.2011, 00:26, "Gordan Bobic"<gordan at bobich.net>:
>> Hmm, I've had a look around on the link you provided but I can't find
>> the kernel sources anywhere. Can you post a link to the sources and/or
>> patches that make it work on the AC100?
>>
>> Gordan
>>
>> On 05/11/2011 06:54 PM, intersolar-direct wrote:
>>
>>> Sorry for delay. We have new, stable kernel 2.6.37.6
>>> Input devices works correctly, work Wireless& 3G& more stuff. Its
>>> build w/o sound& uncorrectly sleep (suspend).
>>> About Fedora on Toshiba AC100. We have launch new kernel 2.6.37 w.
>>> Fedora ARM13
>>> This guide for install Fedora ARM on Toshiba AC100 2.6.37
>>> http://www.pole.su/Toshiba-AC100-Fedora-2.6.37-install-ENG.htm
>>> if we change one string, we install Fedora onToshiba AC100 well:
>>> This string:
>>> wget http://ac100.gudinna.com/tegra-rootfs.tgz
>>> tar xvf tegra-rootfs.tgz --numeric-owner -C /mnt/mmc tar xvf
>>> tegra-rootfs.tgz - numeric-owner-C / mnt / mmc
>>> need change to:
>>> wget http://ausil.us/smartbook/smartbook-rootfs-f13.tar.bz2
>>> tar xvf smartbook-rootfs-f13.tar.bz2 --numeric-owner -C /mnt/mmc tar xvf
>>> smartbook-rootfs-f13.tar.bz2 - numeric-owner-C / mnt / mmc
>>> We use Fedora rootfs from Genesi Smartbook. But we have little problem -
>>> FSTAB seeking rootfs in different place - mmcblk1p2
>>> Where need to change for FSTAB seeking rootfs in right place - mmcblk0p1 ?
>>> 2. Two testing - new rootFS from this
>>> http://fedoraproject.org/wiki/Architectures/ARM/F13-ARM-Beta2 (little hint)
>>> If we use new rootfs from this -
>>> http://scotland.proximity.on.ca/fedora-arm/beta/f13/rootfs-f13-beta3-2011-05-10.tar.bz2
>>> from 11-May-2011 10:52 116M - all working, but only comand prompt (NO
>>> GUI). Its requered this comand (for working wireless internet):
>>> apt-get install wpasupplicant
>>> apt-get install aptitude
>>> modprobe rt2800usb
>>> wpa_passphrase ssid password> /etc/wpa_supplicant/ssid.conf
>>> wpa_supplicant -c /etc/wpa_supplicant/ssid.conf -i wlan0 -D wext
>>> after that (download& start GNOME)
>>> apt-get install gnome
>>> apt-get install xorg
>>>
>>> startx
>>> --------
>>> Good luck
>>>
>>> _______________________________________________
>>> arm mailing list
>>> arm at lists.fedoraproject.org
>>> https://admin.fedoraproject.org/mailman/listinfo/arm
More information about the arm
mailing list