[fedora-arm] ARM F-14 Branched report: 20110823 changes

[omalleys at msu.edu]

Given the recent HP dump of the Touchpads on the market, it might be  
wise to make a snapdragon kernel. I couldn't get my hands on one. :(

Quoting Dennis Gilmore <dennis at ausil.us>:

> On Tuesday, August 23, 2011 09:18:56 AM ARM Branched Report wrote:
>> kernel-2.6.40.3-0.fc14
>> ----------------------
>> * Wed Aug 17 2011 Dennis Gilmore <dennis at ausil.us>
>> - add patch to correctly initialise usb on trimslice systems
>> - build in usb-storage on tegra, internal ssd on trimslice is connected to
>> usb
>>
>> * Tue Aug 16 2011 Dennis Gilmore <dennis at ausil.us>
>> - add patch to work around gcc bug on arm
>>
>> * Mon Aug 15 2011 Dave Jones <davej at redhat.com> 2.6.40.3-0
>> - Apply patches from 3.0.3-rc1
>>
>> * Mon Aug 15 2011 Dave Jones <davej at redhat.com>
>> - Apply patches from 3.0.2
>>
>> * Mon Aug 15 2011 Dave Jones <davej at redhat.com>
>> - CVE-2011-2905 perf tools may parse user-controlled config file. (rhbz
>> 729809)
>>
>> * Sat Aug 13 2011 Dave Jones <davej at redhat.com>
>> - Apply patches from 3.0.2rc1
>>
>> * Thu Aug 11 2011 Dennis Gilmore <dennis at ausil.us>
>> - add config for arm tegra devices
>> - setup kernel to build omap image (patch from David Marlin)
>> - setup kernel to build tegra image based on omap work
>> - add arm device tree patches
>>
>> * Thu Aug 11 2011 Josh Boyer <jwboyer at redhat.com>
>> - Add munged together patch for rhbz 729269
>>
>> * Thu Aug 11 2011 Dave Jones <davej at redhat.com>
>> - Fix Xen blk device naming (rhbz 729340)
>>
>> * Tue Aug 09 2011 Josh Boyer <jwboyer at redhat.com>
>> - Add Makefile.config and ARM config changes from David Marlin
>
>
> so what we have in the repo now with this kernel build is a kernel-omap rpm
> thats been tested on beagleboards and pandaboards, as well as a kernel-tegra
> rpm thats been tested on trimslices and is known to not work on ac100's  as
> well as a plain kernel rpm that has a image suitable for use in qemu but has
> not really been tested yet. there is work going on to get a kernel-kirkwood
> rpm that will be suitable for use on guruplugs and sheevaplugs. if there is
> otherhardware people have out there that we could build kernel rpms  
> for please
> speak up.
>
> we do have a couple of folks looking at getting a patchset that can  
> be used to
> make a kernel-imx for smartbooks and smarttops as well as other freescale
> boards.
>
>
> Dennis
>



-- 
"The information in this email, and attachment(s) thereto, is strictly  
confidential and may be legally privileged. It is intended solely for  
the named recipient(s), and access to this e-mail, or any  
attachment(s) thereto, by anyone else is unauthorized. Violations  
hereof may result in legal actions. Any attachment(s) to this e-mail  
have been checked for viruses, but please rely on your own  
virus-checker and procedures. If you contact us by e-mail, we will  
store your name and address to facilitate communications in the matter  
concerned. If you do not consent to us storing your name and address  
for above stated purpose, please notify the sender promptly. Also, if  
you are not the intended recipient please inform the sender by  
replying to this transmission, and delete the e-mail, its  
attachment(s), and any copies of it without, disclosing it."