[fedora-arm] F20 Beta 5 (XFCE) remix for PandaBoard
Jaromir Capik
jcapik at redhat.com
Tue Nov 19 18:36:01 UTC 2013
Hello Sid.
I just tested your scenario on ECX-1000 with the official F20
images and the same result ...
That means it isn't related to the changes made by me.
It looks more like an autotools related issue.
Have you tested that on x86 ?
Thanks,
Jaromir.
--
Jaromir Capik
Red Hat Czech, s.r.o.
Software Engineer / Secondary Arch
Email: jcapik at redhat.com
Web: www.cz.redhat.com
Red Hat Czech s.r.o., Purkynova 99/71, 612 45, Brno, Czech Republic
IC: 27690016
----- Original Message -----
> From: "Sid Boyce" <sboyce at blueyonder.co.uk>
> To: arm at lists.fedoraproject.org
> Sent: Tuesday, November 12, 2013 3:34:47 AM
> Subject: Re: [fedora-arm] F20 Beta 5 (XFCE) remix for PandaBoard
>
> On 12/11/13 01:06, Sid Boyce wrote:
> > On 08/11/13 17:35, Jaromir Capik wrote:
> >> Hello everyone.
> >>
> >> I created a Fedora 20 Beta 5 remix for Panda and would appreciate
> >> some tests. The image is XFCE only (can add more later).
> >>
> >> You can download the image here:
> >> http://jcapik.fedorapeople.org/files/ARM/f20-remixes/
> >>
> >> Please, let me know whether it works for you ...
> >>
> >> NOTE: It uses the old F19 kernel as the new F20 kernel doesn't boot
> >> on Panda -> do not update the kernel.
> >>
> >> Thanks in advance.
> >>
> >> Regards,
> >> Jaromir.
> >>
> >> --
> >> Jaromir Capik
> >> Red Hat Czech, s.r.o.
> >> Software Engineer / Secondary Arch
> >>
> >> Email: jcapik at redhat.com
> >> Web: www.cz.redhat.com
> >> Red Hat Czech s.r.o., Purkynova 99/71, 612 45, Brno, Czech Republic
> >> IC: 27690016
> >> _______________________________________________
> >> arm mailing list
> >> arm at lists.fedoraproject.org
> >> https://admin.fedoraproject.org/mailman/listinfo/arm
> > I installed all the pre-req packages and I see some configure errors
> > in ghpsdr3-alex that I had only ever seen these errors with openSUSE
> > ARM on ODROID-X, never on Pandaboard Ubuntu nor ODROID-X Ubuntu.
> > Build instructions:-
> > http://napan.ca/ghpsdr3/index.php/QtRadio_Installation#Fedora
> >
> > sudo yum install gcc gcc-c++ man-pages autoconf automake subversion
> > libtool git
> >
> >
> > This is on Pandaboard A3 with Qt-5.2.0, it needs Qt5.
> > #!/bin/sh
> > sudo yum install fftw fftw-devel
> > sudo yum install libusb-devel libusb1-devel
> > sudo yum install portaudio-devel
> > sudo yum install libconfig-devel
> > sudo yum install libsamplerate-devel
> > sudo yum install pulseaudio-libs-devel
> > sudo yum install jack-audio-connection-kit
> > jack-audio-connection-kit-devel
> > sudo yum install qt4-devel
> >
> > codec2-dev:-
> >
> > svn co https://freetel.svn.sourceforge.net/svnroot/freetel/codec2-dev
> > codec2-dev
> >
> > The source is from "git clone
> > git://github.com/alexlee188/ghpsdr3-alex.git"
> > "cd ghpsdr3-alex"
> > "autoreconf -i"
> > "./configure".
> > Part of the error messages:-
> > checking for python script directory...
> > ${prefix}/lib/python2.7/site-packages
> > checking for python extension module directory...
> > ${exec_prefix}/lib/python2.7/site-packages
> > configure: Platform: ARM 7
> > configure: -O3 -pipe -march=armv7 -mfpu=neon -fno-tree-vectorize -fopenmp
> > configure: -O3 -pipe -march=armv7 -mfpu=neon -fno-tree-vectorize -fopenmp
> > checking for library containing round... no
> > checking for library containing pthread_create... no
> > checking for library containing Pa_Initialize... no
> > checking for library containing fftwf_malloc... no
> > checking for library containing codec2_create... no
> > checking for library containing pa_simple_new... no
> > checking for library containing pa_strerror... no
> > checking for library containing usb_init... no
> > checking for library containing jack_client_open... no
> > checking for library containing config_init... no
> > checking for library containing libusb_init... no
> > checking for library containing event_init... no
> > checking for library containing evthread_use_pthreads... no
> > checking for library containing bufferevent_openssl_socket_new... no
> > checking for library containing src_new... no
> > checking for library containing ortp_init... no
> > checking for library containing omp_get_active_level... no
> > checking for size_t... no
> > checking for working alloca.h... no
> > checking for alloca... no
> > checking whether `alloca.c' needs Cray hooks... no
> > checking stack direction for C alloca... -1
> > checking arpa/inet.h usability... no
> > checking arpa/inet.h presence... yes
> > configure: WARNING: arpa/inet.h: present but cannot be compiled
> > configure: WARNING: arpa/inet.h: check for missing prerequisite
> > headers?
> > configure: WARNING: arpa/inet.h: see the Autoconf documentation
> > configure: WARNING: arpa/inet.h: section "Present But Cannot Be
> > Compiled"
> > configure: WARNING: arpa/inet.h: proceeding with the compiler's result
> > configure: WARNING: ##
> > --------------------------------------------- ##
> > configure: WARNING: ## Report this to andrew att montefusco dott
> > com ##
> > configure: WARNING: ##
> > --------------------------------------------- ##
> > checking for arpa/inet.h... no
> > checking fcntl.h usability... no
> > checking fcntl.h presence... yes
> > configure: WARNING: fcntl.h: present but cannot be compiled
> > configure: WARNING: fcntl.h: check for missing prerequisite headers?
> > configure: WARNING: fcntl.h: see the Autoconf documentation
> > configure: WARNING: fcntl.h: section "Present But Cannot Be Compiled"
> > configure: WARNING: fcntl.h: proceeding with the compiler's result
> > configure: WARNING: ##
> > --------------------------------------------- ##
> > configure: WARNING: ## Report this to andrew att montefusco dott
> > com ##
> > configure: WARNING: ##
> > --------------------------------------------- ##
> > checking for fcntl.h... no
> > checking limits.h usability... no
> > checking limits.h presence... yes
> > configure: WARNING: limits.h: present but cannot be compiled
> > configure: WARNING: limits.h: check for missing prerequisite headers?
> > configure: WARNING: limits.h: see the Autoconf documentation
> > configure: WARNING: limits.h: section "Present But Cannot Be
> > Compiled"
> > configure: WARNING: limits.h: proceeding with the compiler's result
> > configure: WARNING: ##
> > --------------------------------------------- ##
> > configure: WARNING: ## Report this to andrew att montefusco dott
> > com ##
> > configure: WARNING: ##
> > --------------------------------------------- ##
> > checking for limits.h... no
> > checking malloc.h usability... no
> > checking malloc.h presence... yes
> > configure: WARNING: malloc.h: present but cannot be compiled
> > configure: WARNING: malloc.h: check for missing prerequisite headers?
> > configure: WARNING: malloc.h: see the Autoconf documentation
> > configure: WARNING: malloc.h: section "Present But Cannot Be
> > Compiled"
> > ##And many other such WARNING messages and ending with ##
> > checking for unistd.h... (cached) yes
> > configure: error:
> > -----------------------------------
> > The pthread library and header file required to build ghpsdr3.
> > root at panda:/1/ghpsdr3-alex# l /usr/include/pthread.h
> > -rw-r--r--. 1 root root 41510 Oct 3 07:28 /usr/include/pthread.h
> > root at panda:/1/ghpsdr3-alex# l /usr/lib/libpthread*
> > -rwxr-xr-x. 1 root root 126448 Oct 3 09:05 /usr/lib/libpthread-2.18.so*
> > -rw-r--r--. 1 root root 1512 Oct 3 09:06
> > /usr/lib/libpthread_nonshared.a
> > -rw-r--r--. 1 root root 221 Oct 3 07:28 /usr/lib/libpthread.so
> > lrwxrwxrwx. 1 root root 18 Nov 6 21:03 /usr/lib/libpthread.so.0
> > -> libpthread-2.18.so*
> >
> > Regards
> > Sid.
> >
> root at panda:/1/ghpsdr3-alex# uname -a
> Linux panda 3.9.5-301.fc19.armv7hl #1 SMP Wed Jun 12 14:56:17 UTC 2013
> armv7l armv7l armv7l GNU/Linux
>
> root at panda:/1/ghpsdr3-alex# yum list *headers*
> Loaded plugins: langpacks
> Installed Packages
> glibc-headers.armv7hl 2.18-11.fc20 @fedora
> kernel-headers.armv7hl 3.11.7-300.fc20
>
> Possibly kernel headers newer than running kernel?
> Regards
> Sid.
>
> --
> Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
> Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
> Senior Staff Specialist, Cricket Coach
> Microsoft Windows Free Zone - Linux used for all Computing Tasks
>
> _______________________________________________
> arm mailing list
> arm at lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/arm
More information about the arm
mailing list