[fedora-arm] Each boot on my Cubietruck, and different MACaddr

[Robert Moskowitz]

On 10/14/2014 09:29 PM, Dennis Gilmore wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On Tue, 14 Oct 2014 18:23:06 -0400
> Robert Moskowitz <rgm at htt-consult.com> wrote:
>
>> This is NOT a question about Redsleeve.  Rather about the F19 uboot
>> that I use with RSEL.  It would impact any F19 Cubietruck system, and
>> as Hans has pointed out any F20 Cubietruck system.
> Note that Fedora 19's u-boot has zero support for the Cubietruck. so
> that is not what you are using, only Fedora 21's and newer u-boot have
> support for the cubietruck. I am not sure what bits you are actually
> using but it does not sound like fedora is in any of it.  if you have
> the issues with f21 or newer then we can work on them and figure out
> what is happening.

Check Hans de Goede's post on this list on 7/18/13

"Announcing Fedora 19 ARM remix for Allwinner SOCs release 1, now with 
A20 support"

There are specific instructions for the Cubie at

http://docs.cubieboard.org/tutorials/cb2/installation/cb2_fedora_19_card_install

Just specify cubietruck rather than cubieboard2.

I believe he stopped with RC3, which is what I and others are using.  
The F20 was done by someone else, but I think Hans said the same uboot.

One thing going for F19 and F20, is that there is video support, so for 
those few systems where I need the video interface, I am using it.  When 
I use the F19 device modules with RSEL, I do get video support, but 
since these are servers, I don't use it.

Also for Centos7-arm, Karanbir, back on 7/2/14, was instructing how to 
start with a F19 armv7 repo as the starting point for building C7arm.  
But there has been no traffic on that list really since early August.

I look forward to finishing these conversion projects so I can get back 
to testing F21.


>
> Dennis
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2
>
> iQIcBAEBAgAGBQJUPc4FAAoJEH7ltONmPFDRhd8QALlKDtz9j90rZX/ZOjrCEygY
> 9PmTHUxiuZpoTO90W7lktX690QfGZOrWfbEr4QewXTll5bNT65cJh3R71DWGVnHa
> OXpB6CjFGYrooqsWbJZ2yA2UpF6DF8DgJcL6cyBprqo+uV1WMHObDtXuPCYOyx3e
> 8nSC3RiYn/+Vj4rKMusUJeIMXl9bwK+DRHSohDVCjVTxBdstXpCZ7xw3kNfu3XZk
> AttdhibEya8eNLno/wrWSdyAIx+QX6Co7Bs69o4ZK9EdOUt7EuXAhY5htnzYgZ2R
> EnsxFIyNruKmIdmtbmgsAZA+GrhgECKX6nZjz0mL3Do15Gc4jbYTqYs4yi+cb3Z4
> adrh/I6m7ObITbGuQPrWtwtBXGd9GXU9bWHGd8MM8xo+sIEkGquGDQpmzOGKYOFK
> EsQ0akwG5UGcvtXcZIjLfo0zjHJjvg13fbRzgkcSu4iQwuPVihaILRL3qCTVJb0M
> hZtIJHl8LMBwnhoygp8zTtsWX5QWp9ncFogEhafGgnyh+LOof6pLsXCQA0ONX+Pt
> UJuiYTQa7DfVCYcfAzYRmpVMBv5w+Amo7SRxFnpOGyQWfJHFUSdahOB1Ftbq1f4Q
> G7NleHFqQQk3/9HPCAZK5KBfD0hFnqn/M8BKSBs7Lzs3gf8wJQrUGp7J7pJrQkZS
> BrCePJYIxveO8mVhj547
> =qSnO
> -----END PGP SIGNATURE-----
> _______________________________________________
> arm mailing list
> arm at lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/arm