[fedora-arm] u-boot 2014.10 GA on it's way to F-21

[Peter Robinson]

A minor bug and is fixed in uboot-tools-2014.10-3.fc21

Peter

On Sat, Oct 18, 2014 at 9:04 PM, Adam Goode <adam at spicenitz.org> wrote:
> Hopefully I did something wrong, but it's not working at all for me on
> the beaglebone black:
>
> Here is what I get when I try to boot from eMMC:
>
> U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
> omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear
> spl: mmc init failed: err - -19
> ### ERROR ### Please RESET the board ###
>
>
>
> Here is what I get when I make a new SD card from the latest minimal image:
>
>
> U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
>
>        Watchdog enabled
> I2C:   ready
> DRAM:  512 MiB
> NAND:  0 MiB
> MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
> *** Error - No Valid Environment Area found
> *** Warning - bad CRC, using default environment
>
> Net:   <ethaddr> not set. Validating first E-fuse MAC
> cpsw, usb_ether
> Hit any key to stop autoboot:  0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:2...
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type **
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type **
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type **
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type **
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type **
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type **
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type **
> Failed to mount ext2 filesystem...
> ** Unrecognized filesystem type **
> Card did not respond to voltage select!
> Booting from nand ...
>
> no devices available
>
> no devices available
> Bad Linux ARM zImage magic!
>
>
>
>
> When I am in the uboot command processor, I cannot select the internal
> eMMC at all:
>
> U-Boot# mmc dev 1
> Card did not respond to voltage select!
>
>
>
> Previously, I was booting with no problems from either eMMC or SD with F21.
>
>
>
> Thanks,
>
> Adam
>
>
> On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson <pbrobinson at gmail.com> wrote:
>> Hi All,
>>
>> Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21.
>>
>> https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
>>
>> This release contains numerous fixes and improvements over the
>> currently shipping release including, but by no means limited to:
>> * Upstream generic distro support (huge thanks to Dennis Gilmore and
>> Steven Warren for their tireless work to get this upstream
>> * AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for
>> this tireless work on this)
>> * Numerous other improvements too long to name.
>>
>> New devices that we now enable in this release, in no particular order, include:
>>
>> AllWinner:
>> A10-OLinuXino-Lime
>> A10s-OLinuXino-M
>> A13-OLinuXino
>> A13-OLinuXinoM
>> A20-OLinuXino_MICRO
>> Bananapi
>> Cubieboard
>> Cubieboard2
>> Cubietruck
>> Mele_A1000
>> Mele_A1000G
>> Mini-X
>> Mini-X-1Gb
>>
>> Tegra:
>> jetson-tk1
>>
>> i.MX6
>> cm_fx6 (Utilite)
>> riotboard
>>
>> It's not yet in nightly builds but I'm going to request it for the
>> next Beta TC compose.
>>
>> Known issues:
>> * Panda is not yet ported to generic distro support
>>
>> Please test and provide feedback.
>>
>> Peter
>> _______________________________________________
>> arm mailing list
>> arm at lists.fedoraproject.org
>> https://admin.fedoraproject.org/mailman/listinfo/arm