Debugging 20s pause in boot time in rawhide

[Jason D. Clinton]

There's a twenty second pause in my boot sequence, shown below, before GDM
starts and I'm not certain if it's in NetworkManager waiting on org.bluez,
bluez itself or the bluez systemd unit file. (Or maybe I'm completely off.)
Later on, the bluetooth.service starts normally and Bluetooth is working
normally. Any ideas how to debug this?

Jan 16 00:59:39 jclinton-laptop NetworkManager[1157]: <info> Activation
(eth0) Stage 4 of 5 (IP4 Configure Get) complete.
Jan 16 00:59:39 jclinton-laptop NetworkManager[1157]: <info> Activation
(eth0) Stage 5 of 5 (IP Configure Commit) started...
Jan 16 00:59:40 jclinton-laptop NetworkManager[1157]: <info> (eth0): device
state change: 7 -> 8 (reason 0)
Jan 16 00:59:40 jclinton-laptop NetworkManager[1157]: <info> Policy set
'Auto eth0' (eth0) as default for IPv4 routing and DNS.
Jan 16 00:59:40 jclinton-laptop NetworkManager[1157]: <info> Updating
/etc/hosts with new system hostname
Jan 16 00:59:40 jclinton-laptop NetworkManager[1157]: <info> Activation
(eth0) successful, device activated.
Jan 16 00:59:40 jclinton-laptop NetworkManager[1157]: <info> Activation
(eth0) Stage 5 of 5 (IP Configure Commit) complete.
Jan 16 00:59:40 jclinton-laptop ntpd[1168]: Listen normally on 4 eth0
192.168.0.139 UDP 123
Jan 16 00:59:40 jclinton-laptop ntpd[1168]: peers refreshed
Jan 16 00:59:42 jclinton-laptop kernel: [   26.723156] ehci_hcd
0000:00:1a.7: PCI INT D disabled
Jan 16 00:59:42 jclinton-laptop kernel: [   26.736202] ehci_hcd
0000:00:1a.7: power state changed by ACPI to D3
Jan 16 00:59:42 jclinton-laptop ntpd[1168]: Listen normally on 5 eth0
fe80::21c:25ff:fea0:814f UDP 123
Jan 16 00:59:42 jclinton-laptop ntpd[1168]: peers refreshed
Jan 16 00:59:42 jclinton-laptop ntpd_intres[1205]: DNS
0.fedora.pool.ntp.org-> 70.86.250.6
Jan 16 00:59:43 jclinton-laptop ntpd_intres[1205]: DNS
1.fedora.pool.ntp.org-> 199.4.28.166
Jan 16 00:59:43 jclinton-laptop ntpd_intres[1205]: DNS
2.fedora.pool.ntp.org-> 208.75.88.4
Jan 16 00:59:43 jclinton-laptop ntpd_intres[1205]: DNS
3.fedora.pool.ntp.org-> 68.68.18.78
Jan 16 00:59:50 jclinton-laptop ntpd[1168]: 0.0.0.0 c61c 0c clock_step
+0.355294 s
Jan 16 00:59:50 jclinton-laptop ntpd[1168]: 0.0.0.0 c614 04 freq_mode
Jan 16 00:59:51 jclinton-laptop ntpd[1168]: 0.0.0.0 c618 08 no_sys_peer
Jan 16 01:00:01 jclinton-laptop NetworkManager[1157]: <warn> bluez error
getting default adapter: Activation of org.bluez timed out
Jan 16 01:00:01 jclinton-laptop libvirtd: Could not find keytab file:
/etc/libvirt/krb5.tab: No such file or directory
Jan 16 01:00:01 jclinton-laptop kernel: [   45.700982] Bridge firewalling
registered
Jan 16 01:00:01 jclinton-laptop NetworkManager[1157]: <warn>
/sys/devices/virtual/net/virbr0: couldn't determine device driver;
ignoring...
Jan 16 01:00:01 jclinton-laptop systemd[1]: Startup finished in 1s 452ms
731us (kernel) + 5s 793ms 302us (initrd) + 38s 538ms 111us (userspace) = 45s
784ms 144us.
Jan 16 01:00:01 jclinton-laptop dnsmasq[1562]: started, version 2.52
cachesize 150
Jan 16 01:00:01 jclinton-laptop dnsmasq[1562]: compile time options: IPv6
GNU-getopt DBus no-I18N DHCP TFTP
Jan 16 01:00:01 jclinton-laptop dnsmasq-dhcp[1562]: DHCP, IP range
192.168.122.2 -- 192.168.122.254, lease time 1h
Jan 16 01:00:01 jclinton-laptop dnsmasq[1562]: reading /etc/resolv.conf
Jan 16 01:00:01 jclinton-laptop dnsmasq[1562]: using nameserver
192.168.0.1#53
Jan 16 01:00:01 jclinton-laptop dnsmasq[1562]: read /etc/hosts - 3 addresses
Jan 16 01:00:01 jclinton-laptop gdm-binary[1533]: DEBUG(+): Enabling
debugging
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.fedoraproject.org/pipermail/devel/attachments/20110116/b121c8e7/attachment.html