Hi,<br>Help !,<br>I want to setup a debug build of wpasupplicant so that i can Trace PEAP - MSCHAP v2 protocol for my study,<br><br>so i have installed Fedora release 10 (Cambridge),<br>the wpa supplicant works fine by default which come with CD,<br>
<br>I downloaded <b>wpa_supplicant-0.6.4-2.fc10.src.rpm</b>,<br>and extracted it to a folder,<br><br>[root@localhost wpa_supplicant]# <b>make</b><br>[root@localhost wpa_supplicant]# <b>make install</b><br><b>$mkdir -p /usr/local/sbin/</b><br>
<b>$for i in wpa_supplicant wpa_passphrase wpa_cli; do cp -f $i /usr/local/sbin/$i; done</b><br>[root@localhost wpa_supplicant]# <br><br><br>but if give command "<b>ps -ef</b> <b>| grep "wpa</b>"<br><br>i can see process running from <b>/usr/sbin</b><br>
but files copied during make install was to <b>/usr/local/sbin/,<br></b>So i copied from<b> </b><b>/usr/local/sbin/wpa</b> to <b>/usr/sbin</b>,<br><br>In network-manager applet the wireless is showing up.<br><br>Below is the output of few command's might help you answer my problem,<br>
<br><br><br><br><br><br><br><br><b>[root@localhost wpa_supplicant]# nm-tool</b><br><br>- Device: wlan0 ----------------------------------------------------------------<br> Type: 802.11 WiFi<br> Driver: ath5k_pci<br>
<b>State: unavailable</b><br> Default: no<br> HW Address: 00:0F:B5:35:09:46<br><br> Capabilities:<br> Supported: yes<br><br> Wireless Settings<br> WEP Encryption: yes<br> WPA Encryption: yes<br>
WPA2 Encryption: yes<br><br> Wireless Access Points<br><br>--------------------------------------------------------------------------------------------<br><br><b>[root@localhost wpa_supplicant]# iwconfig </b><br>lo no wireless extensions.<br>
<br>eth0 no wireless extensions.<br><br>eth1 no wireless extensions.<br><br>wmaster0 no wireless extensions.<br><br>wlan0 IEEE 802.11abg ESSID:"UTStarcom" <br> Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated <br>
Tx-Power=23 dBm <br> Retry min limit:7 RTS thr:off Fragment thr=2352 B <br> Encryption key:off<br> Power Management:off<br> Link Quality:0 Signal level:0 Noise level:0<br>
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br> Tx excessive retries:0 Invalid misc:0 Missed beacon:0<br><br>pan0 no wireless extensions.<br><br>---------------------------------------------------------------------------------------------------------<br>
<br><b>[root@localhost wpa_supplicant]# ifconfig wlan0</b><br>wlan0 Link encap:Ethernet HWaddr 00:0F:B5:35:09:46 <br> UP BROADCAST MULTICAST MTU:1500 Metric:1<br> RX packets:0 errors:0 dropped:0 overruns:0 frame:0<br>
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0<br> collisions:0 txqueuelen:1000 <br> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)<br><br clear="all">-------------------------------------------------------------------------------------<br>
<b>[root@localhost wpa_supplicant]# cat /etc/init.d/wpa_supplicant </b><br>#!/bin/bash<br># Source function library.<br>. /etc/rc.d/init.d/functions<br># Source networking configuration.<br>. /etc/sysconfig/network<br><br>
exec="/usr/sbin/wpa_supplicant"<br>prog=$(basename $exec)<br>conf="/etc/wpa_supplicant/wpa_supplicant.conf"<br>lockfile=/var/lock/subsys/$prog<br><br>[ -e /etc/sysconfig/$prog ] && . /etc/sysconfig/$prog<br>
<br>start() {<br> echo -n $"Starting $prog: $conf, $INTERFACES, $DRIVERS"<br> daemon $prog -c $conf $INTERFACES $DRIVERS -B $OTHER_ARGS<br> retval=$?<br> echo<br> [ $retval -eq 0 ] && touch $lockfile<br>
return $retval<br>}<br><br>----------------------------------------------------------------------------------------<br><b>[root@localhost wpa_supplicant]# cat /etc/wpa_supplicant/wpa_supplicant.conf </b><br>ctrl_interface=/var/run/wpa_supplicant<br>
ctrl_interface_group=wheel<br><br>------------------------------------------------------------------------------------------<br><b>[root@localhost wpa_supplicant]# cat /usr/share/dbus-1/system-services</b>/fi.epitest.hostap.WPASupplicant.service<br>
[D-BUS Service]<br>Name=fi.epitest.hostap.WPASupplicant<br>Exec=/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -dddt -u -f /var/log/wpa_supplicant.log<br>User=root<br>[root@localhost wpa_supplicant]#<br>
------------------------------------------------------------------------------------------<br><br><b>[root@localhost wpa_supplicant]# lshal</b><br><br>udi = '/org/freedesktop/Hal/devices/net_00_0f_b5_35_09_46'<br>
info.capabilities = {'net', 'net.80211'} (string list)<br> info.category = 'net.80211' (string)<br> info.parent = '/org/freedesktop/Hal/devices/pci_168c_13' (string)<br> info.product = 'WLAN Interface' (string)<br>
info.subsystem = 'net' (string)<br> info.udi = '/org/freedesktop/Hal/devices/net_00_0f_b5_35_09_46' (string)<br> linux.hotplug_type = 2 (0x2) (int)<br> linux.subsystem = 'net' (string)<br>
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:00.0/0000:05:00.0/net/wlan0' (string)<br> net.80211.mac_address = 67464661318 (0xfb5350946) (uint64)<br> net.address = '00:0f:b5:35:09:46' (string)<br>
net.arp_proto_hw_id = 1 (0x1) (int)<br> net.interface = 'wlan0' (string)<br> net.linux.ifindex = 5 (0x5) (int)<br> net.originating_device = '/org/freedesktop/Hal/devices/pci_168c_13' (string)<br>
net.physical_device = '/org/freedesktop/Hal/devices/pci_168c_13' (string)<br><br>--------------------------------------------------------------------------------------------------------------------<br><br><br><br>
Please can some one explain how to setup wpa_supplicant from my compiled one,<br>Why is it crashing,<br><br><br><br>Thank & Regards<br>Harsha Krishne Gowda<br><br><br><br><br><br><br>-- <br>ಇಂತಿ <br>ಹರ್ಷ ಕೃ ಗೌಡ<br><br>