Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31.9-174.fc12.x86_64 (mockbuild@x86-01.phx2.fedoraproject.org) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Mon Dec 21 05:33:33 UTC 2009
Command line: ro root=UUID=f98e9849-f5d0-4ea5-9853-2c492804ef38  LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us nodmraid 5
...
Initalizing network drop monitor service
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.2: new low speed USB device using ehci_hcd and address 3
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input3
generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: OCZ SUMMIT, VBM1801Q, max UDMA/100
ata5.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/100
ata3.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata2.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L05, max UDMA/100, ATAPI AN
ata2.00: configured for UDMA/100
ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
usb 1-5.1: new low speed USB device using ehci_hcd and address 4
scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
scsi 1:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1S   9L05 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb:
scsi 4:0:0:0: Direct-Access     ATA      OCZ SUMMIT       VBM1 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12
sd 4:0:0:0: [sdc] Attached SCSI disk
 sda1 sda2 sda3 sda4 < sda5
sd 2:0:0:0: [sdb] Attached SCSI disk
 sda6 sda7 sda8
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
 sda9 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1324k freed
Write protecting the kernel read-only data: 6356k
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input4
generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
dracut: dracut-002-13.4.git8f397a9b.fc12
udev: starting version 145
[drm] Initialized drm 1.1.0 20060810
  alloc irq_desc for 16 on node 0
  alloc kstat_irqs on node 0
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 34 on node 0
  alloc kstat_irqs on node 0
i915 0000:00:02.0: irq 34 for MSI/MSI-X
[drm] DAC-6: set mode 1600x1200 16
Console: switching to colour frame buffer device 200x75
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
pata_marvell 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pata_marvell 0000:03:00.0: setting latency timer to 64
scsi6 : pata_marvell
scsi7 : pata_marvell
ata7: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 18
ata8: DUMMY
EXT4-fs (sdc2): barriers enabled
kjournald2 starting: pid 294, dev sdc2:8, commit interval 5 seconds
EXT4-fs (sdc2): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sdc2): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sdc2
dracut: Loading SELinux policy
type=1404 audit(1263827246.818:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 148895 rules.
SELinux: 8192 avtab hash slots, 148895 rules.
SELinux:  8 users, 12 roles, 3017 types, 145 bools, 1 sens, 1024 cats
SELinux:  75 classes, 148895 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sdc2, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1263827247.009:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
udev: starting version 145
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
e1000e 0000:00:19.0: setting latency timer to 64
  alloc irq_desc for 35 on node 0
  alloc kstat_irqs on node 0
e1000e 0000:00:19.0: irq 35 for MSI/MSI-X
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9DO TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
firewire_ohci 0000:06:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
r8169 0000:06:00.0: no PCI Express capability
eth0: RTL8169sb/8110sb at 0xffffc900097b8000, 00:1e:58:e7:47:a7, XID 10000000 IRQ 21
0000:00:19.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:19:d1:ad:7a:e5
0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth1: MAC: 7, PHY: 6, PBA No: ffffff-0ff
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
  alloc irq_desc for 22 on node 0
  alloc kstat_irqs on node 0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
firewire_core: created device fw0: GUID 0090270001e8e462, S400
hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3866:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3870:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3871:    mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3882:    inputs: mic=0x18, fmic=0x1a, line=0x19, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1181: realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1255: realtek: Enable default setup for auto mode as fallback
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
name_count maxed, losing inode data: dev=00:05, inode=10700
device-mapper: multipath: version 1.1.0 loaded
EXT4-fs (sdc2): internal journal on sdc2:8
EXT4-fs (sdc1): barriers enabled
kjournald2 starting: pid 861, dev sdc1:8, commit interval 5 seconds
EXT4-fs (sdc1): internal journal on sdc1:8
EXT4-fs (sdc1): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sdc1): mounted filesystem with ordered data mode
SELinux: initialized (dev sdc1, type ext4), uses xattr
EXT4-fs (sdc5): barriers enabled
kjournald2 starting: pid 866, dev sdc5:8, commit interval 5 seconds
EXT4-fs (sdc5): internal journal on sdc5:8
EXT4-fs (sdc5): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sdc5): mounted filesystem with ordered data mode
SELinux: initialized (dev sdc5, type ext4), uses xattr
EXT4-fs (sdc12): barriers enabled
kjournald2 starting: pid 871, dev sdc12:8, commit interval 5 seconds
EXT4-fs (sdc12): internal journal on sdc12:8
EXT4-fs (sdc12): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sdc12): mounted filesystem with ordered data mode
SELinux: initialized (dev sdc12, type ext4), uses xattr
EXT4-fs (sdc3): barriers enabled
kjournald2 starting: pid 876, dev sdc3:8, commit interval 5 seconds
EXT4-fs (sdc3): internal journal on sdc3:8
EXT4-fs (sdc3): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sdc3): mounted filesystem with ordered data mode
SELinux: initialized (dev sdc3, type ext4), uses xattr
EXT4-fs (sdc4): barriers enabled
kjournald2 starting: pid 881, dev sdc4:8, commit interval 5 seconds
EXT4-fs (sdc4): internal journal on sdc4:8
EXT4-fs (sdc4): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sdc4): mounted filesystem with ordered data mode
SELinux: initialized (dev sdc4, type ext4), uses xattr
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sdc6
Ending clean XFS mount for filesystem: sdc6
SELinux: initialized (dev sdc6, type xfs), uses xattr
segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
NILFS warning: mounting unchecked fs
NILFS: recovery complete.
SELinux: initialized (dev sdc7, type nilfs2), not configured for labeling
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2097144k swap on /dev/sdc10.  Priority:-1 extents:1 across:2097144k SS
Adding 2097144k swap on /dev/sdc11.  Priority:-2 extents:1 across:2097144k SS
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x10676, pf=0x10, revision=0x0
platform microcode: firmware: requesting intel-ucode/06-17-06
microcode: CPU1 sig=0x10676, pf=0x10, revision=0x0
platform microcode: firmware: requesting intel-ucode/06-17-06
microcode: CPU2 sig=0x10676, pf=0x10, revision=0x0
platform microcode: firmware: requesting intel-ucode/06-17-06
microcode: CPU3 sig=0x10676, pf=0x10, revision=0x0
platform microcode: firmware: requesting intel-ucode/06-17-06
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
microcode: CPU0 updated to revision 0x60c, date = 2008-01-19 
microcode: CPU1 updated to revision 0x60c, date = 2008-01-19 
microcode: CPU2 updated to revision 0x60c, date = 2008-01-19 
microcode: CPU3 updated to revision 0x60c, date = 2008-01-19 
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
coretemp coretemp.3: Using relative temperature scale!
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
e1000e 0000:00:19.0: irq 35 for MSI/MSI-X
e1000e 0000:00:19.0: irq 35 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
r8169: eth0: link up
r8169: eth0: link up
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth1: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth0: no IPv6 routers present
eth1: no IPv6 routers present
type=1305 audit(1263827274.679:38409): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1
type=1400 audit(1263827274.950:38410): avc:  denied  { search } for  pid=318 comm="readahead-colle" name="/" dev=sdc7 ino=2 scontext=system_u:system_r:readahead_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=dir
fuse init (API version 7.12)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
git[26201]: segfault at 1ab7000 ip 00000000004788f0 sp 00007fff327ef7d0 error 4 in git[400000+fa000]
git[26230]: segfault at 17a0000 ip 00000000004788f0 sp 00007fff4e18d960 error 4 in git[400000+fa000]
git[29459]: segfault at 12fd000 ip 00000000004789e0 sp 00007fff42f1f540 error 4 in git[400000+fa000]
git[32457]: segfault at 223b000 ip 000000000049599e sp 00007fff26d624e0 error 4 in git[400000+13a000]
git[32483]: segfault at 11d4000 ip 000000000049599e sp 00007fffe35e8740 error 4 in git[400000+13a000]
git[32511]: segfault at 196d000 ip 000000000049599e sp 00007fff4bebd630 error 4 in git[400000+13a000]
git[32628]: segfault at 1a24000 ip 000000000049599e sp 00007fff3176f3d0 error 4 in git[400000+13a000]
git[3036]: segfault at 1592000 ip 00000000004789e0 sp 00007fffed0a6080 error 4 in git[400000+fa000]
git[6316]: segfault at 1006000 ip 0000000000478a70 sp 00007fffdbf9abe0 error 4 in git[400000+fa000]
git[6330]: segfault at 13e5000 ip 0000000000478a70 sp 00007fff151e6d10 error 4 in git[400000+fa000]
git[8762]: segfault at 1c08000 ip 0000000000478a70 sp 00007fff958cee00 error 4 in git[400000+fa000]
git[11246]: segfault at 2120000 ip 0000000000478900 sp 00007fffb064df20 error 4 in git[400000+fa000]
git[13743]: segfault at 1dd2000 ip 00000000004788b0 sp 00007fff72c23ef0 error 4 in git[400000+fa000]
git[16265]: segfault at 1c65000 ip 0000000000478460 sp 00007fffc06cd410 error 4 in git[400000+f9000]
git[9097]: segfault at 25ee000 ip 0000000000478530 sp 00007fff1e18e210 error 4 in git[400000+f9000]
git[11547]: segfault at 126b000 ip 0000000000478460 sp 00007fff694a3eb0 error 4 in git[400000+f9000]
git[13986]: segfault at 1e48000 ip 0000000000478460 sp 00007fff8fd31d30 error 4 in git[400000+f9000]
git[19353]: segfault at ccb000 ip 0000000000477530 sp 00007fff1608f050 error 4 in git[400000+f3000]
git[21796]: segfault at 23e3000 ip 0000000000477fd0 sp 00007fffcc0da500 error 4 in git[400000+f3000]
git[24763]: segfault at 1909000 ip 0000000000475660 sp 00007fff187b16e0 error 4 in git[400000+ef000]
git[3030]: segfault at 25a5000 ip 000000000049599e sp 00007fff6e57f4b0 error 4 in git[400000+13a000]
git[3042]: segfault at 20d7000 ip 000000000049599e sp 00007fff398a48e0 error 4 in git[400000+13a000]
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0030) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0030) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
usb 1-5: clear tt 1 (0040) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0030) error -71
usb 1-5: USB disconnect, address 2
usb 1-5.1: USB disconnect, address 4
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0030) error -19
usb 1-5.2: USB disconnect, address 3
usb 1-5: new high speed USB device using ehci_hcd and address 5
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 6
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input6
generic-usb 0003:413C:2003.0003: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 7
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input7
generic-usb 0003:046D:C03E.0004: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0070) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0070) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
usb 1-5: clear tt 1 (0060) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0070) error -71
usb 1-5: USB disconnect, address 5
usb 1-5.1: USB disconnect, address 6
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0070) error -19
usb 1-5.2: USB disconnect, address 7
usb 1-5: new high speed USB device using ehci_hcd and address 8
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 9
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input8
generic-usb 0003:413C:2003.0005: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 10
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input9
generic-usb 0003:046D:C03E.0006: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
SELinux: 8192 avtab hash slots, 150068 rules.
SELinux: 8192 avtab hash slots, 150068 rules.
SELinux:  8 users, 12 roles, 3029 types, 146 bools, 1 sens, 1024 cats
SELinux:  75 classes, 150068 rules
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (00a0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (00a0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
usb 1-5: clear tt 1 (0090) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (00a0) error -71
usb 1-5: USB disconnect, address 8
usb 1-5.1: USB disconnect, address 9
usb 1-5.2: USB disconnect, address 10
usb 1-5: new high speed USB device using ehci_hcd and address 11
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 12
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input10
generic-usb 0003:413C:2003.0007: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 13
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input11
generic-usb 0003:046D:C03E.0008: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (00d0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (00c0) error -71
usb 1-5: clear tt 1 (00d0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (00d0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (00d0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
usb 1-5: USB disconnect, address 11
usb 1-5.1: USB disconnect, address 12
usb 1-5: clear tt 1 (00c0) error -71
usb 1-5.2: USB disconnect, address 13
usb 1-5: new high speed USB device using ehci_hcd and address 14
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 15
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input12
generic-usb 0003:413C:2003.0009: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 16
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input13
generic-usb 0003:046D:C03E.000A: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0100) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0100) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
usb 1-5: clear tt 1 (00f0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0100) error -71
usb 1-5: USB disconnect, address 14
usb 1-5.1: USB disconnect, address 15
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0100) error -19
usb 1-5.2: USB disconnect, address 16
usb 1-5: new high speed USB device using ehci_hcd and address 17
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 18
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input14
generic-usb 0003:413C:2003.000B: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 19
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input15
generic-usb 0003:046D:C03E.000C: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0130) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0130) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
usb 1-5: clear tt 1 (0120) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0130) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: USB disconnect, address 17
usb 1-5.1: USB disconnect, address 18
usb 1-5: clear tt 1 (0130) error -71
usb 1-5.2: USB disconnect, address 19
usb 1-5: new high speed USB device using ehci_hcd and address 20
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 21
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input16
generic-usb 0003:413C:2003.000D: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 22
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input17
generic-usb 0003:046D:C03E.000E: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0160) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0160) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
usb 1-5: clear tt 1 (0150) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0160) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0160) error -71
usb 1-5: USB disconnect, address 20
usb 1-5.1: USB disconnect, address 21
usb 1-5.2: USB disconnect, address 22
usb 1-5: new high speed USB device using ehci_hcd and address 23
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.2: new low speed USB device using ehci_hcd and address 24
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input18
generic-usb 0003:046D:C03E.000F: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
usb 1-5.1: new low speed USB device using ehci_hcd and address 25
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input19
generic-usb 0003:413C:2003.0010: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0180) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0180) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
usb 1-5: clear tt 1 (0190) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0180) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: USB disconnect, address 23
usb 1-5.1: USB disconnect, address 25
usb 1-5: clear tt 1 (0180) error -71
usb 1-5.2: USB disconnect, address 24
usb 1-5: new high speed USB device using ehci_hcd and address 26
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 27
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input20
generic-usb 0003:413C:2003.0011: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 28
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input21
generic-usb 0003:046D:C03E.0012: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (01c0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (01c0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
usb 1-5: clear tt 1 (01b0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (01c0) error -71
usb 1-5: USB disconnect, address 26
usb 1-5.1: USB disconnect, address 27
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (01c0) error -19
usb 1-5.2: USB disconnect, address 28
usb 1-5: new high speed USB device using ehci_hcd and address 29
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 30
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input22
generic-usb 0003:413C:2003.0013: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 31
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input23
generic-usb 0003:046D:C03E.0014: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (01f0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (01e0) error -71
usb 1-5: clear tt 1 (01f0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (01f0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (01f0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
usb 1-5: USB disconnect, address 29
usb 1-5.1: USB disconnect, address 30
usb 1-5: clear tt 1 (01e0) error -71
usb 1-5.2: USB disconnect, address 31
usb 1-5: new high speed USB device using ehci_hcd and address 32
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 33
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input24
generic-usb 0003:413C:2003.0015: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 34
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input25
generic-usb 0003:046D:C03E.0016: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0220) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0210) error -71
usb 1-5: clear tt 1 (0220) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0220) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0220) error -71
usb 1-5: USB disconnect, address 32
usb 1-5.1: USB disconnect, address 33
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -108
usb 1-5.2: USB disconnect, address 34
usb 1-5: new high speed USB device using ehci_hcd and address 35
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 36
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input26
generic-usb 0003:413C:2003.0017: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 37
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input27
generic-usb 0003:046D:C03E.0018: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
zsh[31421]: segfault at 7fff271adda8 ip 0000003af00355c1 sp 00007fff271addb0 error 6 in libc-2.11.1.so[3af0000000+16f000]
zsh[31476]: segfault at 7fffc0333be8 ip 0000003af00355c1 sp 00007fffc0333bf0 error 6 in libc-2.11.1.so[3af0000000+16f000]
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0250) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0240) error -71
usb 1-5: clear tt 1 (0250) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0250) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0250) error -71
usb 1-5: USB disconnect, address 35
usb 1-5.1: USB disconnect, address 36
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -108
usb 1-5.2: USB disconnect, address 37
usb 1-5: new high speed USB device using ehci_hcd and address 38
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 39
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input28
generic-usb 0003:413C:2003.0019: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 40
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input29
generic-usb 0003:046D:C03E.001A: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
ata3.00: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata3.00: irq_stat 0x00000040, connection status changed
ata3: SError: { DevExch }
ata3.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
         res 50/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
ata3.00: status: { DRDY }
ata3: hard resetting link
ata3: SATA link down (SStatus 0 SControl 300)
ata3: hard resetting link
ata3: SATA link down (SStatus 0 SControl 300)
ata3: limiting SATA link speed to 1.5 Gbps
ata3: hard resetting link
ata3: SATA link down (SStatus 0 SControl 310)
ata3.00: disabled
ata3: EH complete
ata3.00: detaching (SCSI 2:0:0:0)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 2:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sdb] START_STOP FAILED
sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sh[13738]: segfault at 0 ip (null) sp 00007fffca741d68 error 14 in bash[400000+cc000]
sh[13740]: segfault at 0 ip (null) sp 00007fffa2ff2f18 error 14 in bash[400000+cc000]
sh[13743]: segfault at 0 ip (null) sp 00007ffffb0727e8 error 14 in bash[400000+cc000]
sh[13746]: segfault at 0 ip (null) sp 00007fff9305f218 error 14 in bash[400000+cc000]
sh[13761]: segfault at 0 ip (null) sp 00007fff66834ea8 error 14 in bash[400000+cc000]
sh[13764]: segfault at 0 ip (null) sp 00007fff86f1cf38 error 14 in bash[400000+cc000]
sh[13766]: segfault at 0 ip (null) sp 00007fff1353d3d8 error 14 in bash[400000+cc000]
sh[13768]: segfault at 0 ip (null) sp 00007fffc0c96228 error 14 in bash[400000+cc000]
sh[13770]: segfault at 0 ip (null) sp 00007fffd1a09dd8 error 14 in bash[400000+cc000]
sh[13772]: segfault at 0 ip (null) sp 00007fffcc072698 error 14 in bash[400000+cc000]
sh[13782]: segfault at 0 ip (null) sp 00007fffecb75268 error 14 in bash[400000+cc000]
sh[13784]: segfault at 0 ip (null) sp 00007fff161cbe48 error 14 in bash[400000+cc000]
sh[13790]: segfault at 0 ip (null) sp 00007ffffe18c288 error 14 in bash[400000+cc000]
sh[13792]: segfault at 0 ip (null) sp 00007fff93857af8 error 14 in bash[400000+cc000]
sh[13794]: segfault at 0 ip (null) sp 00007fff1c01e878 error 14 in bash[400000+cc000]
sh[13796]: segfault at 0 ip (null) sp 00007fffc53078f8 error 14 in bash[400000+cc000]
sh[13799]: segfault at 0 ip (null) sp 00007fff3aaba3e8 error 14 in bash[400000+cc000]
sh[13801]: segfault at 0 ip (null) sp 00007fff2083ffd8 error 14 in bash[400000+cc000]
sh[13811]: segfault at 0 ip (null) sp 00007fff74824c08 error 14 in bash[400000+cc000]
sh[13819]: segfault at 0 ip (null) sp 00007fff515dc398 error 14 in bash[400000+cc000]
sh[13824]: segfault at 0 ip (null) sp 00007fff624b1f38 error 14 in bash[400000+cc000]
sh[13826]: segfault at 0 ip (null) sp 00007fffef5b5708 error 14 in bash[400000+cc000]
sh[13828]: segfault at 0 ip (null) sp 00007fffc8bde198 error 14 in bash[400000+cc000]
sh[13830]: segfault at 0 ip (null) sp 00007fff52ac6e18 error 14 in bash[400000+cc000]
sh[13832]: segfault at 0 ip (null) sp 00007fff4512e958 error 14 in bash[400000+cc000]
sh[13835]: segfault at 0 ip (null) sp 00007fff01f3a698 error 14 in bash[400000+cc000]
sh[13839]: segfault at 0 ip (null) sp 00007fff9bc1ccb8 error 14 in bash[400000+cc000]
sh[13841]: segfault at 0 ip (null) sp 00007fff1f36a398 error 14 in bash[400000+cc000]
sh[13843]: segfault at 0 ip (null) sp 00007fff2592e118 error 14 in bash[400000+cc000]
sh[13845]: segfault at 0 ip (null) sp 00007fff7536bdc8 error 14 in bash[400000+cc000]
__ratelimit: 1 callbacks suppressed
sh[13849]: segfault at 0 ip (null) sp 00007fff5dc5b958 error 14 in bash[400000+cc000]
sh[13851]: segfault at 0 ip (null) sp 00007fffd7beb038 error 14 in bash[400000+cc000]
sh[13854]: segfault at 0 ip (null) sp 00007fffa1af1738 error 14 in bash[400000+cc000]
sh[13860]: segfault at 0 ip (null) sp 00007fff0bad0718 error 14 in bash[400000+cc000]
ls[13863]: segfault at 0 ip (null) sp 00007fffc0d07328 error 14 in ls[400000+18000]
rm[13868]: segfault at 0 ip (null) sp 00007fff322b5278 error 14 in rm[400000+d000]
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0280) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0270) error -71
usb 1-5: clear tt 1 (0280) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0280) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (0280) error -71
usb 1-5: USB disconnect, address 38
usb 1-5.1: USB disconnect, address 39
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -108
usb 1-5.2: USB disconnect, address 40
usb 1-5: new high speed USB device using ehci_hcd and address 41
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 42
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input30
generic-usb 0003:413C:2003.001B: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 43
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input31
generic-usb 0003:046D:C03E.001C: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
zsh[22764]: segfault at 7fff32369828 ip 0000003af00355c1 sp 00007fff32369830 error 6 in libc-2.11.1.so[3af0000000+16f000]
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (02b0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (02a0) error -71
usb 1-5: clear tt 1 (02b0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (02b0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (02b0) error -71
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.1/input0, status -71
usb 1-5: clear tt 1 (02a0) error -71
usb 1-5: USB disconnect, address 41
usb 1-5.1: USB disconnect, address 42
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1a.7-5.2/input0, status -71
usb 1-5: clear tt 1 (02b0) error -19
usb 1-5.2: USB disconnect, address 43
usb 1-5: new high speed USB device using ehci_hcd and address 44
usb 1-5: New USB device found, idVendor=0409, idProduct=0058
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: USB2.0 Hub Controller
usb 1-5: Manufacturer: NEC Corporation
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 45
usb 1-5.1: New USB device found, idVendor=413c, idProduct=2003
usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.1: Product: Dell USB Keyboard
usb 1-5.1: Manufacturer: Dell
usb 1-5.1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input32
generic-usb 0003:413C:2003.001D: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-5.1/input0
usb 1-5.2: new low speed USB device using ehci_hcd and address 46
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c03e
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB-PS/2 Optical Mouse
usb 1-5.2: Manufacturer: Logitech
usb 1-5.2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input33
generic-usb 0003:046D:C03E.001E: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-5.2/input0
