PATCH, RFC: handle debug options for rawhide differently (was: Re: [kernel] Disable debugging options.)
Thorsten Leemhuis
fedora at leemhuis.info
Sun Oct 21 20:00:23 UTC 2012
Hi!
Reviving a old discussion, hence I'm quoting a bit more text that I normally would:
On 20.06.2012 15:22, Josh Boyer wrote:
> On Mon, Jun 18, 2012 at 10:05:38PM +0200, Thorsten Leemhuis wrote:
>> On 18.06.2012 15:09, Josh Boyer wrote:
>>> commit 3b37beedf48825354c42e25f7001677320958d38
>>> Author: Josh Boyer <jwboyer at redhat.com>
>>> Date: Mon Jun 18 09:09:58 2012 -0400
>>>
>>> Disable debugging options.
>>>
>>> config-generic | 8 ++--
>>> config-nodebug | 112 ++++++++++++++++++++++++++--------------------------
>>> config-x86-generic | 2 +-
>>> kernel.spec | 9 +++-
>>> 4 files changed, 67 insertions(+), 64 deletions(-)
>>> [...]
>
> I hesitated to reply because I honestly don't know _why_ it's done this
> way. You ask a good question though, and I didn't want you to think we
> were ignoring it so I'll reply with what I do know (which isn't much).
>
>> Just out of curiosity: Why is enabling and disabling the debug options
>> done via "make {no,}debug" in the git checkout and not by an conditional
>> within the spec file? That afaics makes it harder to switch the debug
>> options off if you only have the SRPM at hand.
>
> It's actually done with 'make debug' and 'make release'. Those run a
> bunch of perl invocations to toggle the options on or off in various
> config- files.
>
>> Or am I missing something obvious here?
>
> I don't think you're missing anything obvious. The config- file munging
> has been around longer than Fedora has so at this point it's "just how
> it's done". If someone wanted to come up with a way to accomplish the
> same thing by toggling a value in the spec file, that might actually be
> good.
Find below a solution I worked out: It simply copies config-debug to config-nodebug when needed (e.g. when debugbuildsenabled is 0) during prep and enables the rawhide specific debug options directly -- similar to how the Makefiles do it now, but the source files remain untouched. In my testing it resulted in nearly the exact config files for rawhide kernels (I tested both debugbuildsenabled 0 and 1). There are two exceptions: CONFIG_MAC80211_MESSAGE_TRACING and CONFIG_EDAC_DEBUG are now enabled in the debugbuildsenabled 0 case (e.g. when a normal rawhide kernel is build). That's afaics how it was meant -- but the Makefile missed perl calls to enable these options this case.
Note, this also removes the extremedebug call in the makefile; does anyone use it? If yes I can work out a solution that fits better into this scheme.
Copying config-debug to config-nodebug is still a kind of a hack -- but IMHO it is way more obvious what happens than before; and it's less error prone and easier to maintain afaics.
How does the patch (against master) look to you guys? Did I miss anything that is needed? Please note that all the changes the patch does to the config-foo files are just those that a "make release" does now. And a lot of stuff is removed from the Makefiles, hence the patch looks big.
Scratch build with "debugbuildsenabled 0"
http://koji.fedoraproject.org/koji/taskinfo?taskID=4612876
Scratch build with "debugbuildsenabled 1" (i686 still building as of this writing, but everything looks sane so far)
http://koji.fedoraproject.org/koji/taskinfo?taskID=4612997
Cu
thl
diff --git a/Makefile b/Makefile
index 2a87029..4e4d4e1 100644
--- a/Makefile
+++ b/Makefile
@@ -22,83 +22,7 @@ noarch:
local: noarch
fedpkg -v local
-extremedebug:
- @perl -pi -e 's/# CONFIG_DEBUG_PAGEALLOC is not set/CONFIG_DEBUG_PAGEALLOC=y/' config-nodebug
-
debug:
- @perl -pi -e 's/# CONFIG_SLUB_DEBUG_ON is not set/CONFIG_SLUB_DEBUG_ON=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_LOCK_STAT is not set/CONFIG_LOCK_STAT=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_STACK_USAGE is not set/CONFIG_DEBUG_STACK_USAGE=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_SLAB is not set/CONFIG_DEBUG_SLAB=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_MUTEXES is not set/CONFIG_DEBUG_MUTEXES=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_RT_MUTEXES is not set/CONFIG_DEBUG_RT_MUTEXES=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_LOCK_ALLOC is not set/CONFIG_DEBUG_LOCK_ALLOC=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_PROVE_LOCKING is not set/CONFIG_PROVE_LOCKING=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_PROVE_RCU is not set/CONFIG_PROVE_RCU=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_SPINLOCK is not set/CONFIG_DEBUG_SPINLOCK=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_VM is not set/CONFIG_DEBUG_VM=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_FAULT_INJECTION is not set/CONFIG_FAULT_INJECTION=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_FAILSLAB is not set/CONFIG_FAILSLAB=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_FAIL_PAGE_ALLOC is not set/CONFIG_FAIL_PAGE_ALLOC=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_FAIL_IO_TIMEOUT is not set/CONFIG_FAIL_IO_TIMEOUT=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_FAIL_MAKE_REQUEST is not set/CONFIG_FAIL_MAKE_REQUEST=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_FAIL_MMC_REQUEST is not set/CONFIG_FAIL_MMC_REQUEST=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/CONFIG_FAULT_INJECTION_DEBUG_FS=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_SG is not set/CONFIG_DEBUG_SG=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_WRITECOUNT is not set/CONFIG_DEBUG_WRITECOUNT=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_OBJECTS is not set/CONFIG_DEBUG_OBJECTS=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_FREE is not set/CONFIG_DEBUG_OBJECTS_FREE=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/CONFIG_DEBUG_OBJECTS_TIMERS=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_WORK is not set/CONFIG_DEBUG_OBJECTS_WORK=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set/CONFIG_DEBUG_OBJECTS_RCU_HEAD=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_X86_PTDUMP is not set/CONFIG_X86_PTDUMP=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_CAN_DEBUG_DEVICES is not set/CONFIG_CAN_DEBUG_DEVICES=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_MODULE_FORCE_UNLOAD is not set/CONFIG_MODULE_FORCE_UNLOAD=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_SYSCTL_SYSCALL_CHECK is not set/CONFIG_SYSCTL_SYSCALL_CHECK=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_NOTIFIERS is not set/CONFIG_DEBUG_NOTIFIERS=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DMA_API_DEBUG is not set/CONFIG_DMA_API_DEBUG=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_PM_TEST_SUSPEND is not set/CONFIG_PM_TEST_SUSPEND=y/' config-generic
- @perl -pi -e 's/# CONFIG_PM_ADVANCED_DEBUG is not set/CONFIG_PM_ADVANCED_DEBUG=y/' config-generic
- @perl -pi -e 's/# CONFIG_B43_DEBUG is not set/CONFIG_B43_DEBUG=y/' config-generic
- @perl -pi -e 's/# CONFIG_B43LEGACY_DEBUG is not set/CONFIG_B43LEGACY_DEBUG=y/' config-generic
- @perl -pi -e 's/# CONFIG_MMIOTRACE is not set/CONFIG_MMIOTRACE=y/' config-nodebug
- @perl -pi -e 's/CONFIG_STRIP_ASM_SYMS=y/# CONFIG_STRIP_ASM_SYMS is not set/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_CREDENTIALS is not set/CONFIG_DEBUG_CREDENTIALS=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_ACPI_DEBUG is not set/CONFIG_ACPI_DEBUG=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_EXT4_DEBUG is not set/CONFIG_EXT4_DEBUG=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_PERF_USE_VMALLOC is not set/CONFIG_DEBUG_PERF_USE_VMALLOC=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_JBD2_DEBUG is not set/CONFIG_JBD2_DEBUG=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_NFSD_FAULT_INJECTION is not set/CONFIG_NFSD_FAULT_INJECTION=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_BLK_CGROUP is not set/CONFIG_DEBUG_BLK_CGROUP=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DRBD_FAULT_INJECTION is not set/CONFIG_DRBD_FAULT_INJECTION=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_ATH_DEBUG is not set/CONFIG_ATH_DEBUG=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_CARL9170_DEBUGFS is not set/CONFIG_CARL9170_DEBUGFS=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/CONFIG_IWLWIFI_DEVICE_TRACING=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DMADEVICES_DEBUG is not set/CONFIG_DMADEVICES_DEBUG=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DMADEVICES_VDEBUG is not set/CONFIG_DMADEVICES_VDEBUG=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/CONFIG_CEPH_LIB_PRETTYDEBUG=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_QUOTA_DEBUG is not set/CONFIG_QUOTA_DEBUG=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_KGDB_KDB is not set/CONFIG_KGDB_KDB=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_KDB_KEYBOARD is not set/CONFIG_KDB_KEYBOARD=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_PER_CPU_MAPS is not set/CONFIG_DEBUG_PER_CPU_MAPS=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_TEST_LIST_SORT is not set/CONFIG_TEST_LIST_SORT=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_ATOMIC_SLEEP is not set/CONFIG_DEBUG_ATOMIC_SLEEP=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DETECT_HUNG_TASK is not set/CONFIG_DETECT_HUNG_TASK=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set/CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y/' config-nodebug
- @perl -pi -e 's/# CONFIG_DEBUG_KMEMLEAK is not set/CONFIG_DEBUG_KMEMLEAK=y/' config-nodebug
-
- @# just in case we're going from extremedebug -> debug
- @perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug
-
- @perl -pi -e 's/# CONFIG_MAXSMP is not set/CONFIG_MAXSMP=y/' config-x86-generic
-
- @# Try out UAS in rawhide builds.
- @perl -pi -e 's/# CONFIG_USB_UAS is not set/CONFIG_USB_UAS=m/' config-generic
-
@perl -pi -e 's/^%define debugbuildsenabled 1/%define debugbuildsenabled 0/' kernel.spec
@perl -pi -e 's/^%define rawhide_skip_docs 0/%define rawhide_skip_docs 1/' kernel.spec
@rpmdev-bumpspec -c "Reenable debugging options." kernel.spec
@@ -107,13 +31,11 @@ nodebuginfo:
@perl -pi -e 's/^%define with_debuginfo %\{\?_without_debuginfo: 0\} %\{\?\!_without_debuginfo: 1\}/%define with_debuginfo %\{\?_without_debuginfo: 0\} %\{\?\!_without_debuginfo: 0\}/' kernel.spec
nodebug: release
@perl -pi -e 's/^%define debugbuildsenabled 1/%define debugbuildsenabled 0/' kernel.spec
-release: config-release
+release:
@perl -pi -e 's/^%define debugbuildsenabled 0/%define debugbuildsenabled 1/' kernel.spec
@perl -pi -e 's/^%define rawhide_skip_docs 1/%define rawhide_skip_docs 0/' kernel.spec
@rpmdev-bumpspec -c "Disable debugging options." kernel.spec
-include Makefile.release
-
unused-kernel-patches:
@for f in *.patch; do if [ -e $$f ]; then (egrep -q "^Patch[[:digit:]]+:[[:space:]]+$$f" $(SPECFILE) || echo "Unused: $$f") && egrep -q "^ApplyPatch[[:space:]]+$$f|^ApplyOptionalPatch[[:space:]]+$$f" $(SPECFILE) || echo "Unapplied: $$f"; fi; done
diff --git a/Makefile.release b/Makefile.release
deleted file mode 100644
index ee811ba..0000000
--- a/Makefile.release
+++ /dev/null
@@ -1,81 +0,0 @@
-# Make rules for configuration files.
-#
-# $Id$
-
-# This file contains only entries that change the config files.
-# Anything that changes kernel.spec itself should go in the main Makefile.
-
-config-release:
- @perl -pi -e 's/CONFIG_SLUB_DEBUG_ON=y/# CONFIG_SLUB_DEBUG_ON is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_LOCK_STAT=y/# CONFIG_LOCK_STAT is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_STACK_USAGE=y/# CONFIG_DEBUG_STACK_USAGE is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_SLAB=y/# CONFIG_DEBUG_SLAB is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_MUTEXES=y/# CONFIG_DEBUG_MUTEXES is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_RT_MUTEXES=y/# CONFIG_DEBUG_RT_MUTEXES is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_LOCK_ALLOC=y/# CONFIG_DEBUG_LOCK_ALLOC is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_PROVE_LOCKING=y/# CONFIG_PROVE_LOCKING is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_PROVE_RCU=y/# CONFIG_PROVE_RCU is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_SPINLOCK=y/# CONFIG_DEBUG_SPINLOCK is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_VM=y/# CONFIG_DEBUG_VM is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_FAULT_INJECTION=y/# CONFIG_FAULT_INJECTION is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_FAILSLAB=y/# CONFIG_FAILSLAB is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_FAIL_PAGE_ALLOC=y/# CONFIG_FAIL_PAGE_ALLOC is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_FAIL_IO_TIMEOUT=y/# CONFIG_FAIL_IO_TIMEOUT is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_FAIL_MAKE_REQUEST=y/# CONFIG_FAIL_MAKE_REQUEST is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_FAIL_MMC_REQUEST=y/# CONFIG_FAIL_MMC_REQUEST is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_FAULT_INJECTION_DEBUG_FS=y/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_SG=y/# CONFIG_DEBUG_SG is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_WRITECOUNT=y/# CONFIG_DEBUG_WRITECOUNT is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_OBJECTS=y/# CONFIG_DEBUG_OBJECTS is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_OBJECTS_FREE=y/# CONFIG_DEBUG_OBJECTS_FREE is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_OBJECTS_TIMERS=y/# CONFIG_DEBUG_OBJECTS_TIMERS is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_OBJECTS_WORK=y/# CONFIG_DEBUG_OBJECTS_WORK is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y/# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_OBJECTS_RCU_HEAD=y/# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_X86_PTDUMP=y/# CONFIG_X86_PTDUMP is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_CAN_DEBUG_DEVICES=y/# CONFIG_CAN_DEBUG_DEVICES is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_MODULE_FORCE_UNLOAD=y/# CONFIG_MODULE_FORCE_UNLOAD is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_SYSCTL_SYSCALL_CHECK=y/# CONFIG_SYSCTL_SYSCALL_CHECK is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_NOTIFIERS=y/# CONFIG_DEBUG_NOTIFIERS is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DMA_API_DEBUG=y/# CONFIG_DMA_API_DEBUG is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_PM_TEST_SUSPEND=y/# CONFIG_PM_TEST_SUSPEND is not set/' config-generic
- @perl -pi -e 's/CONFIG_PM_ADVANCED_DEBUG=y/# CONFIG_PM_ADVANCED_DEBUG is not set/' config-generic
- @perl -pi -e 's/CONFIG_B43_DEBUG=y/# CONFIG_B43_DEBUG is not set/' config-generic
- @perl -pi -e 's/CONFIG_B43LEGACY_DEBUG=y/# CONFIG_B43LEGACY_DEBUG is not set/' config-generic
- @perl -pi -e 's/CONFIG_MMIOTRACE=y/# CONFIG_MMIOTRACE is not set/' config-nodebug
- @perl -pi -e 's/# CONFIG_STRIP_ASM_SYMS is not set/CONFIG_STRIP_ASM_SYMS=y/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_CREDENTIALS=y/# CONFIG_DEBUG_CREDENTIALS is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_ACPI_DEBUG=y/# CONFIG_ACPI_DEBUG is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_EXT4_DEBUG=y/# CONFIG_EXT4_DEBUG is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_PERF_USE_VMALLOC=y/# CONFIG_DEBUG_PERF_USE_VMALLOC is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_JBD2_DEBUG=y/# CONFIG_JBD2_DEBUG is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_NFSD_FAULT_INJECTION=y/# CONFIG_NFSD_FAULT_INJECTION is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_BLK_CGROUP=y/# CONFIG_DEBUG_BLK_CGROUP is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DRBD_FAULT_INJECTION=y/# CONFIG_DRBD_FAULT_INJECTION is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_ATH_DEBUG=y/# CONFIG_ATH_DEBUG is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_CARL9170_DEBUGFS=y/# CONFIG_CARL9170_DEBUGFS is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_IWLWIFI_DEVICE_TRACING=y/# CONFIG_IWLWIFI_DEVICE_TRACING is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DMADEVICES_DEBUG=y/# CONFIG_DMADEVICES_DEBUG is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DMADEVICES_VDEBUG=y/# CONFIG_DMADEVICES_VDEBUG is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_CEPH_LIB_PRETTYDEBUG=y/# CONFIG_CEPH_LIB_PRETTYDEBUG is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_QUOTA_DEBUG=y/# CONFIG_QUOTA_DEBUG is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_CPU_NOTIFIER_ERROR_INJECT=m/# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_PER_CPU_MAPS=y/# CONFIG_DEBUG_PER_CPU_MAPS is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_TEST_LIST_SORT=y/# CONFIG_TEST_LIST_SORT is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_ATOMIC_SLEEP=y/# CONFIG_DEBUG_ATOMIC_SLEEP is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DETECT_HUNG_TASK=y/# CONFIG_DETECT_HUNG_TASK is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y/# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_DEBUG_KMEMLEAK=y/# CONFIG_DEBUG_KMEMLEAK is not set/' config-nodebug
- @perl -pi -e 's/CONFIG_MAC80211_MESSAGE_TRACING=y/# CONFIG_MAC80211_MESSAGE_TRACING is not set/' config-nodebug
-
- @# Undo anything that make extremedebug might have set
- @perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-debug
- @perl -pi -e 's/CONFIG_DEBUG_PAGEALLOC=y/# CONFIG_DEBUG_PAGEALLOC is not set/' config-nodebug
-
- @# Change defaults back to sane things.
- @perl -pi -e 's/CONFIG_MAXSMP=y/# CONFIG_MAXSMP is not set/' config-x86-generic
-
- @# Disable UAS for release until it's ready. (#717633, #744099)
- @perl -pi -e 's/CONFIG_USB_UAS=m/# CONFIG_USB_UAS is not set/' config-generic
diff --git a/config-generic b/config-generic
index 4a8015f..1b9be57 100644
--- a/config-generic
+++ b/config-generic
@@ -1459,13 +1459,13 @@ CONFIG_B43_SDIO=y
CONFIG_B43_BCMA=y
# CONFIG_B43_BCMA_EXTRA is not set
CONFIG_B43_BCMA_PIO=y
-CONFIG_B43_DEBUG=y
+# CONFIG_B43_DEBUG is not set
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_HT=y
# CONFIG_B43_FORCE_PIO is not set
CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_DEBUG=y
+# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
@@ -3031,7 +3031,7 @@ CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_LIBUSUAL is not set
-CONFIG_USB_UAS=m
+# CONFIG_USB_UAS is not set
#
@@ -3984,7 +3984,7 @@ CONFIG_IBMASR=m
CONFIG_PM_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
-CONFIG_PM_TEST_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_RUNTIME=y
# CONFIG_PM_OPP is not set
# CONFIG_PM_AUTOSLEEP is not set
diff --git a/config-nodebug b/config-nodebug
index b52b784..c471b85 100644
--- a/config-nodebug
+++ b/config-nodebug
@@ -2,111 +2,111 @@ CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_PCM_XRUN_DEBUG=y
-CONFIG_DEBUG_ATOMIC_SLEEP=y
-
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_PROVE_RCU=y
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_PROVE_RCU is not set
# CONFIG_PROVE_RCU_REPEATEDLY is not set
-CONFIG_DEBUG_PER_CPU_MAPS=y
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_CPUMASK_OFFSTACK=y
-CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
-CONFIG_FAULT_INJECTION=y
-CONFIG_FAILSLAB=y
-CONFIG_FAIL_PAGE_ALLOC=y
-CONFIG_FAIL_MAKE_REQUEST=y
-CONFIG_FAULT_INJECTION_DEBUG_FS=y
-CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
-CONFIG_FAIL_IO_TIMEOUT=y
-CONFIG_FAIL_MMC_REQUEST=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_FAILSLAB is not set
+# CONFIG_FAIL_PAGE_ALLOC is not set
+# CONFIG_FAIL_MAKE_REQUEST is not set
+# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
+# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
+# CONFIG_FAIL_IO_TIMEOUT is not set
+# CONFIG_FAIL_MMC_REQUEST is not set
-CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_LOCK_STAT=y
+# CONFIG_LOCK_STAT is not set
-CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_ACPI_DEBUG=y
+# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
-CONFIG_DEBUG_SG=y
+# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUG_WRITECOUNT=y
-CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
-CONFIG_DEBUG_OBJECTS_FREE=y
-CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
+# CONFIG_DEBUG_OBJECTS_FREE is not set
+# CONFIG_DEBUG_OBJECTS_TIMERS is not set
+# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
-CONFIG_X86_PTDUMP=y
+# CONFIG_X86_PTDUMP is not set
-CONFIG_CAN_DEBUG_DEVICES=y
+# CONFIG_CAN_DEBUG_DEVICES is not set
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_DEBUG_NOTIFIERS=y
+# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_DMA_API_DEBUG=y
+# CONFIG_DMA_API_DEBUG is not set
-CONFIG_MMIOTRACE=y
+# CONFIG_MMIOTRACE is not set
-CONFIG_DEBUG_CREDENTIALS=y
+# CONFIG_DEBUG_CREDENTIALS is not set
# off in both production debug and nodebug builds,
# on in rawhide nodebug builds
-CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-CONFIG_EXT4_DEBUG=y
+# CONFIG_EXT4_DEBUG is not set
-CONFIG_DEBUG_PERF_USE_VMALLOC=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_JBD2_DEBUG=y
+# CONFIG_JBD2_DEBUG is not set
-CONFIG_NFSD_FAULT_INJECTION=y
+# CONFIG_NFSD_FAULT_INJECTION is not set
-CONFIG_DEBUG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
-CONFIG_DRBD_FAULT_INJECTION=y
+# CONFIG_DRBD_FAULT_INJECTION is not set
-CONFIG_ATH_DEBUG=y
-CONFIG_CARL9170_DEBUGFS=y
-CONFIG_IWLWIFI_DEVICE_TRACING=y
+# CONFIG_ATH_DEBUG is not set
+# CONFIG_CARL9170_DEBUGFS is not set
+# CONFIG_IWLWIFI_DEVICE_TRACING is not set
-CONFIG_DEBUG_OBJECTS_WORK=y
+# CONFIG_DEBUG_OBJECTS_WORK is not set
-CONFIG_DMADEVICES_DEBUG=y
-CONFIG_DMADEVICES_VDEBUG=y
+# CONFIG_DMADEVICES_DEBUG is not set
+# CONFIG_DMADEVICES_VDEBUG is not set
CONFIG_PM_ADVANCED_DEBUG=y
-CONFIG_CEPH_LIB_PRETTYDEBUG=y
-CONFIG_QUOTA_DEBUG=y
+# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
+# CONFIG_QUOTA_DEBUG is not set
CONFIG_PCI_DEFAULT_USE_CRS=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
-CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
-CONFIG_TEST_LIST_SORT=y
+# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
+# CONFIG_TEST_LIST_SORT is not set
-CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
-CONFIG_DEBUG_KMEMLEAK=y
+# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=1024
# CONFIG_DEBUG_KMEMLEAK_TEST is not set
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
diff --git a/config-x86-generic b/config-x86-generic
index b209e66..09d63d4 100644
--- a/config-x86-generic
+++ b/config-x86-generic
@@ -319,7 +319,7 @@ CONFIG_STRICT_DEVMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_DEBUG_TLBFLUSH is not set
-CONFIG_MAXSMP=y
+# CONFIG_MAXSMP is not set
CONFIG_HP_ILO=m
diff --git a/kernel.spec b/kernel.spec
index 520615e..d4ea88f 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -162,7 +162,6 @@ Summary: The Linux kernel
# Set debugbuildsenabled to 1 for production (build separate debug kernels)
# and 0 for rawhide (all kernels are debug kernels).
-# See also 'make debug' and 'make release'.
%define debugbuildsenabled 0
# Want to build a vanilla kernel build without any non-upstream patches?
@@ -567,7 +566,6 @@ Source16: mod-extra.list
Source17: mod-extra.sh
Source18: mod-extra-sign.sh
-Source19: Makefile.release
Source20: Makefile.config
Source21: config-debug
Source22: config-nodebug
@@ -1283,10 +1281,20 @@ cp $RPM_SOURCE_DIR/config-* .
cp %{SOURCE15} .
%if !%{debugbuildsenabled}
-%if %{with_release}
-# The normal build is a really debug build and the user has explicitly requested
-# a release kernel. Change the config files into non-debug versions.
-make -f %{SOURCE19} config-release
+%if !%{with_release}
+# some additional debugging for rawhide builds
+perl -pi -e 's/# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set/CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y/' config-debug
+perl -pi -e 's/# CONFIG_PM_TEST_SUSPEND is not set/CONFIG_PM_TEST_SUSPEND=y/' config-generic
+perl -pi -e 's/# CONFIG_PM_ADVANCED_DEBUG is not set/CONFIG_PM_ADVANCED_DEBUG=y/' config-generic
+perl -pi -e 's/# CONFIG_B43_DEBUG is not set/CONFIG_B43_DEBUG=y/' config-generic
+perl -pi -e 's/# CONFIG_B43LEGACY_DEBUG is not set/CONFIG_B43LEGACY_DEBUG=y/' config-generic
+# Enable Maximum number of SMP Processors and NUMA Nodes
+perl -pi -e 's/# CONFIG_MAXSMP is not set/CONFIG_MAXSMP=y/' config-x86-generic
+# Try out UAS in rawhide builds
+perl -pi -e 's/# CONFIG_USB_UAS is not set/CONFIG_USB_UAS=m/' config-generic
+
+# now make the nodebug config file actually a debug config
+cp config-debug config-nodebug
%endif
%endif
More information about the kernel
mailing list