WARNING: CPU: 1 PID: 0 at kernel/time/tick-broadcast.c:668 tick_broadcast_oneshot_control+0x17d/0x190()

[poma]

On 11.02.2014 15:25, Thomas Gleixner wrote:
> On Mon, 10 Feb 2014, Thomas Gleixner wrote:
>> On Mon, 10 Feb 2014, poma wrote:
>>
>>> [   83.558551]  [<ffffffff81025b17>] amd_e400_idle+0x87/0x130
>>
>> So this seems to happen only on AMD machines which use that e400 idle
>> mode. I have no idea at the moment whats wrong there. I'll find one of
>> those machines and try to reproduce.
> 
> Found it. Patch below.
> 
> Thanks,
> 
> 	tglx
> ----
> Subject: tick: Clear broadcast pending bit when switching to oneshot
> From: Thomas Gleixner <tglx at linutronix.de>
> Date: Tue, 11 Feb 2014 14:35:40 +0100
> 
> AMD systems which use the C1E workaround in the amd_e400_idle routine
> trigger the WARN_ON_ONCE in the broadcast code when onlining a CPU.
> 
> The reason is that the idle routine of those AMD systems switches the
> cpu into forced broadcast mode early on before the newly brought up
> CPU can switch over to high resolution / NOHZ mode. The timer related
> CPU1 bringup looks like this:
> 
>   clockevent_register_device(local_apic);
>   tick_setup(local_apic);
>   ...
>   idle()
> 	tick_broadcast_on_off(FORCE);
> 	tick_broadcast_oneshot_control(ENTER)
> 	  cpumask_set(cpu, broadcast_oneshot_mask);
> 	halt();
> 
> Now the broadcast interrupt on CPU0 sets CPU1 in the
> broadcast_pending_mask and wakes CPU1. So CPU1 continues:
> 
> 	local_apic_timer_interrupt()
> 	   tick_handle_periodic();
> 	   softirq()
> 	     tick_init_highres();
> 	       cpumask_clr(cpu, broadcast_oneshot_mask);
> 	
> 	tick_broadcast_oneshot_control(ENTER)
> 	   WARN_ON(cpumask_test(cpu, broadcast_pending_mask);
> 
> So while we remove CPU1 from the broadcast_oneshot_mask when we switch
> over to highres mode, we do not clear the pending bit, which then
> triggers the warning when we go back to idle.
> 
> The reason why this is only visible on C1E affected AMD systems is
> that the other machines enter the deep sleep states via
> acpi_idle/intel_idle and exit the broadcast mode before executing the
> remote triggered local_apic_timer_interrupt. So the pending bit is
> already cleared when the switch over to highres mode is clearing the
> oneshot mask.
> 
> The solution is simple: Clear the pending bit together with the mask
> bit when we switch over to highres mode.
> 
> Reported-by: poma <pomidorabelisima at gmail.com>
> Cc: stable at vger.kernel.org # 3.10+
> Signed-off-by: Thomas Gleixner <tglx at linutronix.de>
> ---
>  kernel/time/tick-broadcast.c |    1 +
>  1 file changed, 1 insertion(+)
> 
> Index: linux-2.6/kernel/time/tick-broadcast.c
> ===================================================================
> --- linux-2.6.orig/kernel/time/tick-broadcast.c
> +++ linux-2.6/kernel/time/tick-broadcast.c
> @@ -756,6 +756,7 @@ out:
>  static void tick_broadcast_clear_oneshot(int cpu)
>  {
>  	cpumask_clear_cpu(cpu, tick_broadcast_oneshot_mask);
> +	cpumask_clear_cpu(cpu, tick_broadcast_pending_mask);
>  }
>  
>  static void tick_broadcast_init_next_event(struct cpumask *mask,
> 
> 

Thanks!


poma