[Fedora-livecd-list] Help with a problem I am seeing when trying to build a liveCD for FC13
Jim Galarowicz
jeg at krellinst.org
Wed Jul 14 13:44:51 UTC 2010
Hi,
I've been building a FC13 liveCD to showcase our OpenSpeedShop
performance tool.
The process was working well and I was creating liveCDs that I could
boot and exercise our tool. Then, I'm not sure what happened, as now I
see this when trying to build the liveCD:
Installing: libICE ################### [ 69/1129]
Installing: info ################### [ 70/1129]
sh: uname: command not found
Installing: popt ################### [ 71/1129]
Installing: chkconfig ################### [ 72/1129]
Installing: libcom_err ################### [ 73/1129]
Installing: readline ################### [ 74/1129]
sh: uname: command not found
Installing: sqlite ################### [ 75/1129]
and
Installing: libdwarf ################### [ 239/1129]
sh: uname: command not found
/home/jeg/OpenSpeedShop/liveOSS/INSTALL/rpm-tmp.kepEKp: line 6: chmod:
command not found
/home/jeg/OpenSpeedShop/liveOSS/INSTALL/rpm-tmp.kepEKp: line 7: chmod:
command not found
/home/jeg/OpenSpeedShop/liveOSS/INSTALL/rpm-tmp.kepEKp: line 8: chmod:
command not found
/home/jeg/OpenSpeedShop/liveOSS/INSTALL/rpm-tmp.kepEKp: line 9: chmod:
command not found
/home/jeg/OpenSpeedShop/liveOSS/INSTALL/rpm-tmp.kepEKp: line 10: chmod:
command not found
warning: %post(libdwarf-20091230-1.i686) scriptlet failed, exit status 127
Installing: libtevent ################### [ 240/1129]
and
Installing: coreutils-libs ################### [ 355/1129]
sh: uname: command not found
Installing: coreutils ################### [ 356/1129]
error: error creating temporary file
/home/jeg/OpenSpeedShop/liveOSS/INSTALL/localhost.localdomain/rpm-tmp.EGAzFe:
No such file or directory
error: Couldn't create temporary file for
%post(coreutils-8.4-6.fc13.i686): No such file or directory
Installing: pam ################### [ 357/1129]
error: error creating temporary file
/home/jeg/OpenSpeedShop/liveOSS/INSTALL/localhost.localdomain/rpm-tmp.nqKSh7:
No such file or directory
error: Couldn't create temporary file for %post(pam-1.1.1-4.fc13.i686):
No such file or directory
Has anyone encountered this? It seems that the install_root isn't
getting the coreutils installed correctly or at all? I don't know if
something was killed in the middle of building and I'm stuck in some
intermediate setup state? I reinstalled the livecd-tools to see if
that would help, but it didn't.
Any help would be greatly appreciated.
Thanks,
Jim G.
THE DETAILS:
Steps I take to prepare the liveCD rpms:
//****************************************************************************//
// Getting
Started //
// Preparing The Base System
Environment //
//****************************************************************************//
1. Install Needed Development Packages
Note: Try to start with a base Fedora Core installation that includes
most development packages.
yum -y install libtool-ltdl-devel livecd-tools createrepo
2. Prepare The Local yum Repository
mkdir -p /var/www/html/yum/{base,updates}
cp /media/Fedora\ 13\ i386\
DVD/repodata/fce31f091be8211a394d8942fcf4f6cbeffa3d40d87b61af55a97b1a88b46987-Fedora-13-comps.xml
/var/www/html/yum/base/.
cp /media/Fedora\ 13\ i386\ DVD/Packages/*.rpm /var/www/html/yum/base/.
I had to copy these RPMs into /var/www/html/yum/base in order to create
the live os for OpenSpeedShop
cp /home/jeg/Downloads/anaconda-13.42-1.fc13.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/binutils-2.20.51.0.2-20.fc13.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/binutils-devel-2.20.51.0.2-20.fc13.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/binutils-static-2.20.51.0.2-20.fc13.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/blas-3.2.1-4.fc13.i686.rpm /var/www/html/yum/base/.
cp /home/jeg/Downloads/makebootfat-1.4-9.fc12.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/isomd5sum-1.0.5-3.fc12.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/pykickstart-1.69-1.fc13.noarch.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/python-cryptsetup-0.0.10-2.fc13.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/pyparted-3.3-1.fc13.i686.rpm /var/www/html/yum/base/.
cp /home/jeg/Downloads/python-pyblock-0.47-1.fc13.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/python-nss-0.8-1.fc12.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/scim-chewing-0.3.3-2.fc12.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/scim-pinyin-0.5.91-27.fc12.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/squashfs-tools-4.0-4.fc13.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/syslinux-3.84-1.fc13.i686.rpm
/var/www/html/yum/base/.
cp
/home/jeg/Downloads/tigervnc-server-1.0.90-0.8.20100219svn3993.fc13.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/tigervnc-1.0.0-1.fc12.i686.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/perl-5.10.0-82.fc12.i686.rpm /var/www/html/yum/base/.
cp /home/jeg/Downloads/perl-Crypt-PasswdMD5-1.3-5.fc12.noarch.rpm
/var/www/html/yum/base/.
cp /home/jeg/Downloads/lapack-3.2.1-4.fc13.i686.rpm /var/www/html/yum/base/.
cp /home/jeg/Downloads/xorg-x11-fonts-misc-7.2-9.fc12.noarch.rpm
/var/www/html/yum/base/.
3. Build Open MPI using provided spec file.
Copy created RPM to /var/www/html/yum/base/
4) Build toyprograms, webtutorials, and optionally the openmpi package using
the setup_and_build_rpms.sh script
Copy created RPMs to /var/www/html/yum/base/
5. Build OpenSpeedShop prerequisite packages.
Copy created RPMs to /var/www/html/yum/base/
6. Build OpenSpeedShop
Copy created RPM to /var/www/html/yum/base/
7. Create Local yum Repository
createrepo -dg
/var/www/html/yum/base/fce31f091be8211a394d8942fcf4f6cbeffa3d40d87b61af55a97b1a88b46987-Fedora-13-comps.xml
/var/www/html/yum/base/
-----------------------------------------------------------------------------------------------------------
then use buildlivecd.sh, the build script I run after the steps above:
-----------------------------------------------------------------------------------------------------------
#!/bin/sh
livecd_label=OpenSpeedShop-Live
livecd_kickstart_file=livecd-fedora-13-openss.ks
#You must run livecd-creator as root...
if [ `whoami` != "root" ]; then
echo "remember: you must be root to run livecd-creator..."
fi
su -c "livecd-creator --config=$livecd_kickstart_file \
--fslabel=$livecd_label" root
-----------------------------------------------------------------------------------------------------------
cat livecd-fedora-13-base-openss.ks
-----------------------------------------------------------------------------------------------------------
# fedora-live-base.ks
#
# Defines the basics for all kickstarts in the fedora-live branch
# Does not include package selection (other then mandatory)
# Does not include localization packages or configuration
#
# Does includes "default" language configuration (kickstarts including
# this template can override these settings)
lang en_US.UTF-8
keyboard us
timezone US/Eastern
auth --useshadow --enablemd5
selinux --disabled
firewall --enabled --service=mdns
xconfig --startxonboot
part / --size 3072 --fstype ext4
services --enabled=NetworkManager --disabled=network,sshd
repo --name=a-base --baseurl=file:///var/www/html/yum/base
%packages
@base-x
@base
@core
@fonts
@input-methods
# Exclude ibus-pinyin-open-phrase as it's large and somewhat optional
-ibus-pinyin-open-phrase
@admin-tools
@dial-up
@hardware-support
@printing
# Explicitly specified here:
# <notting> walters: because otherwise dependency loops cause yum issues.
kernel
# The point of a live image is to install
anaconda
isomd5sum
#Fix for SELINUX Disabled
/usr/sbin/lokkit
%end
%post
# FIXME: it'd be better to get this installed from a package
cat > /etc/rc.d/init.d/livesys << EOF
#!/bin/bash
#
# live: Init script for live image
#
# chkconfig: 345 00 99
# description: Init script for live image.
. /etc/init.d/functions
if ! strstr "\`cat /proc/cmdline\`" liveimg || [ "\$1" != "start" ]; then
exit 0
fi
if [ -e /.liveimg-configured ] ; then
configdone=1
fi
exists() {
which \$1 >/dev/null 2>&1 || return
\$*
}
touch /.liveimg-configured
# mount live image
if [ -b \`readlink -f /dev/live\` ]; then
mkdir -p /mnt/live
mount -o ro /dev/live /mnt/live 2>/dev/null || mount /dev/live /mnt/live
fi
livedir="LiveOS"
for arg in \`cat /proc/cmdline\` ; do
if [ "\${arg##live_dir=}" != "\${arg}" ]; then
livedir=\${arg##live_dir=}
return
fi
done
# enable swaps unless requested otherwise
swaps=\`blkid -t TYPE=swap -o device\`
if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
for s in \$swaps ; do
action "Enabling swap partition \$s" swapon \$s
done
fi
if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f
/mnt/live/\${livedir}/swap.img ] ; then
action "Enabling swap file" swapon /mnt/live/\${livedir}/swap.img
fi
mountPersistentHome() {
# support label/uuid
if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}"
!= "\${homedev}" ]; then
homedev=\`/sbin/blkid -o device -t "\$homedev"\`
fi
# if we're given a file rather than a blockdev, loopback it
if [ "\${homedev##mtd}" != "\${homedev}" ]; then
# mtd devs don't have a block device but get magic-mounted with -t
jffs2
mountopts="-t jffs2"
elif [ ! -b "\$homedev" ]; then
loopdev=\`losetup -f\`
if [ "\${homedev##/mnt/live}" != "\${homedev}" ]; then
action "Remounting live store r/w" mount -o remount,rw /mnt/live
fi
losetup \$loopdev \$homedev
homedev=\$loopdev
fi
# if it's encrypted, we need to unlock it
if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" =
"crypto_LUKS" ]; then
echo
echo "Setting up encrypted /home device"
plymouth ask-for-password --command="cryptsetup luksOpen \$homedev
EncHome"
homedev=/dev/mapper/EncHome
fi
# and finally do the mount
mount \$mountopts \$homedev /home
# if we have /home under what's passed for persistent home, then
# we should make that the real /home. useful for mtd device on olpc
if [ -d /home/home ]; then mount --bind /home/home /home ; fi
[ -x /sbin/restorecon ] && /sbin/restorecon /home
if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
}
findPersistentHome() {
for arg in \`cat /proc/cmdline\` ; do
if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
homedev=\${arg##persistenthome=}
return
fi
done
}
if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
findPersistentHome
elif [ -e /mnt/live/\${livedir}/home.img ]; then
homedev=/mnt/live/\${livedir}/home.img
fi
# if we have a persistent /home, then we want to go ahead and mount it
if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev"
] ; then
action "Mounting persistent /home" mountPersistentHome
fi
# make it so that we don't do writing to the overlay for things which
# are just tmpdirs/caches
mount -t tmpfs -o mode=0755 varcacheyum /var/cache/yum
mount -t tmpfs tmp /tmp
mount -t tmpfs vartmp /var/tmp
[ -x /sbin/restorecon ] && /sbin/restorecon /var/cache/yum /tmp /var/tmp
>/dev/null 2>&1
if [ -n "\$configdone" ]; then
exit 0
fi
# add openssuser user with no passwd
useradd -c "OpenSpeedShop Live User" openssuser
passwd -d openssuser > /dev/null
# turn off firstboot for livecd boots
chkconfig --level 345 firstboot off 2>/dev/null
# don't start yum-updatesd for livecd boots
chkconfig --level 345 yum-updatesd off 2>/dev/null
# turn off mdmonitor by default
chkconfig --level 345 mdmonitor off 2>/dev/null
# turn off setroubleshoot on the live image to preserve resources
chkconfig --level 345 setroubleshoot off 2>/dev/null
# don't do packagekit checking by default
gconftool-2 --direct
--config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t string
/apps/gnome-packagekit/update-icon/frequency_get_updates never >/dev/null
gconftool-2 --direct
--config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t string
/apps/gnome-packagekit/update-icon/frequency_get_upgrades never >/dev/null
gconftool-2 --direct
--config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t string
/apps/gnome-packagekit/update-icon/frequency_refresh_cache never >/dev/null
gconftool-2 --direct
--config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool
/apps/gnome-packagekit/update-icon/notify_available false >/dev/null
gconftool-2 --direct
--config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool
/apps/gnome-packagekit/update-icon/notify_distro_upgrades false >/dev/null
gconftool-2 --direct
--config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool
/apps/gnome-packagekit/enable_check_firmware false >/dev/null
gconftool-2 --direct
--config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool
/apps/gnome-packagekit/enable_check_hardware false >/dev/null
gconftool-2 --direct
--config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool
/apps/gnome-packagekit/enable_codec_helper false >/dev/null
gconftool-2 --direct
--config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool
/apps/gnome-packagekit/enable_font_helper false >/dev/null
gconftool-2 --direct
--config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool
/apps/gnome-packagekit/enable_mime_type_helper false >/dev/null
# don't start cron/at as they tend to spawn things which are
# disk intensive that are painful on a live image
chkconfig --level 345 crond off 2>/dev/null
chkconfig --level 345 atd off 2>/dev/null
chkconfig --level 345 anacron off 2>/dev/null
chkconfig --level 345 readahead_early off 2>/dev/null
chkconfig --level 345 readahead_later off 2>/dev/null
# Stopgap fix for RH #217966; should be fixed in HAL instead
touch /media/.hal-mtab
# workaround clock syncing on shutdown that we don't want (#297421)
sed -i -e 's/hwclock/no-such-hwclock/g' /etc/rc.d/init.d/halt
# and hack so that we eject the cd on shutdown if we're using a CD...
if strstr "\`cat /proc/cmdline\`" CDLABEL= ; then
cat >> /sbin/halt.local << FOE
#!/bin/bash
# XXX: This often gets stuck during shutdown because /etc/init.d/halt
# (or something else still running) wants to read files from the block\
# device that was ejected. Disable for now. Bug #531924
# we want to eject the cd on halt, but let's also try to avoid
# io errors due to not being able to get files...
#cat /sbin/halt > /dev/null
#cat /sbin/reboot > /dev/null
#/usr/sbin/eject -p -m \$(readlink -f /dev/live) >/dev/null 2>&1
#echo "Please remove the CD from your drive and press Enter to finish
restarting"
#read -t 30 < /dev/console
FOE
chmod +x /sbin/halt.local
fi
EOF
# bah, hal starts way too late
cat > /etc/rc.d/init.d/livesys-late << EOF
#!/bin/bash
#
# live: Late init script for live image
#
# chkconfig: 345 99 01
# description: Late init script for live image.
. /etc/init.d/functions
if ! strstr "\`cat /proc/cmdline\`" liveimg || [ "\$1" != "start" ] || [
-e /.liveimg-late-configured ] ; then
exit 0
fi
exists() {
which \$1 >/dev/null 2>&1 || return
\$*
}
touch /.liveimg-late-configured
# read some variables out of /proc/cmdline
for o in \`cat /proc/cmdline\` ; do
case \$o in
ks=*)
ks="--kickstart=\${o#ks=}"
;;
xdriver=*)
xdriver="--set-driver=\${o#xdriver=}"
;;
esac
done
# this is a bad hack to work around #460581 for the geode
# purely to help move testing along for now
if [ \`grep -c Geode /proc/cpuinfo\` -ne 0 ]; then
cat > /etc/X11/xorg.conf <<FOE
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 30-67
VertRefresh 48-52
DisplaySize 152 114
Mode "1200x900"
DotClock 57.275
HTimings 1200 1208 1216 1240
VTimings 900 905 908 912
Flags "-HSync" "-VSync"
EndMode
EndSection
Section "Device"
Identifier "Videocard0"
Driver "amd"
VendorName "Advanced Micro Devices, Inc."
BoardName "AMD Geode GX/LX"
Option "AccelMethod" "EXA"
Option "NoCompression" "true"
Option "MigrationHeuristic" "greedy"
Option "PanelGeometry" "1200x900"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1200x900"
EndSubSection
EndSection
FOE
fi
# if liveinst or textinst is given, start anaconda
if strstr "\`cat /proc/cmdline\`" liveinst ; then
plymouth --quit
/usr/sbin/liveinst \$ks
fi
if strstr "\`cat /proc/cmdline\`" textinst ; then
plymouth --quit
/usr/sbin/liveinst --text \$ks
fi
# configure X, allowing user to override xdriver
if [ -n "\$xdriver" ]; then
exists system-config-display --noui --reconfig --set-depth=24 \$xdriver
fi
EOF
chmod 755 /etc/rc.d/init.d/livesys
/sbin/restorecon /etc/rc.d/init.d/livesys
/sbin/chkconfig --add livesys
chmod 755 /etc/rc.d/init.d/livesys-late
/sbin/restorecon /etc/rc.d/init.d/livesys-late
/sbin/chkconfig --add livesys-late
# work around for poor key import UI in PackageKit
rm -f /var/lib/rpm/__db*
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora
echo "Packages within this LiveCD"
rpm -qa
# go ahead and pre-make the man -k cache (#455968)
/usr/sbin/makewhatis -w
# save a little bit of space at least...
rm -f /boot/initramfs*
# make sure there aren't core files lying around
rm -f /core*
# convince readahead not to collect
rm -f /.readahead_collect
touch /var/lib/readahead/early.sorted
%end
%post --nochroot
cp $INSTALL_ROOT/usr/share/doc/*-release-*/GPL $LIVE_ROOT/GPL
cp
$INSTALL_ROOT/usr/share/doc/HTML/readme-live-image/en_US/readme-live-image-en_US.txt
$LIVE_ROOT/README
# only works on x86, x86_64
if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
fi
# copy some test applications for OpenSpeedShop
# make sure these apps exist on your host machine...and were compiled in
# in the same location. This makes source mapping easier for OpenSpeedShop.
%end
-----------------------------------------------------------------------------------------------------------
livecd-fedora-13-openss.ks
-----------------------------------------------------------------------------------------------------------
%include livecd-fedora-13-base-openss.ks
%packages
@graphical-internet
@gnome-desktop
NetworkManager-vpnc
NetworkManager-openvpn
# OpenSpeedShop-specific
openmpi
libdwarf
libunwind
sqlite
papi
libmonitor
dyninst
mrnet
openspeedshop
toyprograms
webtutorial
# dictionaries are big
-aspell-*
-man-pages-*
-scim-tables-*
-wqy-bitmap-fonts
-dejavu-fonts-experimental
-dejavu-fonts
# more fun with space saving
-scim-lang-chinese
scim-chewing
scim-pinyin
# save some space
-gnome-user-docs
-gimp-help
-evolution-help
-autofs
-nss_db
-vino
#-evolution TODO: need to mod the gnome panel...
-ekiga
-pidgin
-transmission
-tomboy
%end
%post
cat >> /etc/rc.d/init.d/fedora-live << EOF
# disable screensaver locking
gconftool-2 --direct
--config-source=xml:readwrite:/etc/gconf/gconf.xml.defaults -s -t bool
/apps/gnome-screensaver/lock_enabled false >/dev/null
# set up timed auto-login for after 1 second
sed -i -e
's/\[daemon\]/[daemon]\nTimedLoginEnable=true\nTimedLogin=openssuser\nTimedLoginDelay=1/'
/etc/gdm/custom.conf
if [ -e /usr/share/icons/hicolor/96x96/apps/fedora-logo-icon.png ] ; then
cp /usr/share/icons/hicolor/96x96/apps/fedora-logo-icon.png
/home/openssuser/.face
chown openssuser:openssuser /home/fedora/.face
# TODO: would be nice to get e-d-s to pick this one up too... but how?
fi
# add some OpenSpeedShop bashrc goodies...
echo "cat << EOF" > /root/.bashrc.oss
echo "------------------------------" >> /root/.bashrc.oss
echo "Welcome to Open|SpeedShop Live" >> /root/.bashrc.oss
echo "------------------------------" >> /root/.bashrc.oss
echo " " >> /root/.bashrc.oss
echo "To run a sequential experiment:" >> /root/.bashrc.oss
echo " >> cd sequential/smg2000/test" >> /root/.bashrc.oss
echo " >> osspcsamp \"smg2000 -n 50 50 50\" " >> /root/.bashrc.oss
echo " >> openss -f smg2000-pcsamp.openss &" >> /root/.bashrc.oss
echo " " >> /root/.bashrc.oss
echo "To run an MPI experiment:" >> /root/.bashrc.oss
echo " >> cd mpi/smg2000/test" >> /root/.bashrc.oss
echo " >> osspcsamp \"mpirun -np 2 smg2000 -n 50 50 50\" " >>
/root/.bashrc.oss
echo " >> openss -f smg2000-pcsamp.openss &" >> /root/.bashrc.oss
echo " " >> /root/.bashrc.oss
echo "For more information, please see the included HTML documentation."
>> /root/.bashrc.oss
echo "EOF" >> /root/.bashrc.oss
echo "if \[ -f /etc/bashrc \]; then" >> /root/.bashrc.oss
echo " . /etc/bashrc" >> /root/.bashrc.oss
echo "fi" >> /root/.bashrc.oss
echo "export QTDIR=/usr/lib/qt-3.3" >> /root/.bashrc.oss
echo "export OPENSS_PREFIX=/opt/OSS" >> /root/.bashrc.oss
echo "export OPENSS_PLUGIN_PATH=\\\$OPENSS_PREFIX/lib/openspeedshop" >>
/root/.bashrc.oss
echo "export OPENSS_INSTRUMENTOR=mrnet" >> /root/.bashrc.oss
echo "export OPENSS_MRNET_TOPOLOGY_FILE=/home/openssuser/.openss.top" >>
/root/.bashrc.oss
echo "export OPENSS_RAWDATA_DIR=/tmp" >> /root/.bashrc.oss
echo "export OPENSS_MPI_OPENMPI=/opt/openmpi" >> /root/.bashrc.oss
echo "export
DYNINSTAPI_RT_LIB=\\\$OPENSS_PREFIX/lib/libdyninstAPI_RT.so.1" >>
/root/.bashrc.oss
echo "export PATH=\\\$OPENSS_PREFIX/bin:/opt/openmpi/bin:\\\$PATH" >>
/root/.bashrc.oss
echo "export
LD_LIBRARY_PATH=\\\$OPENSS_PREFIX/lib:/opt/openmpi/lib:\\\$LD_LIBRARY_PATH"
>> /root/.bashrc.oss
echo "export XPLAT_RSHCOMMAND=ssh" >> /root/.bashrc.oss
echo "export XPLAT_RSH=ssh" >> /root/.bashrc.oss
echo "export MRNET_RSH=ssh" >> /root/.bashrc.oss
chmod 644 /root/.bashrc.oss
cp /root/.bashrc.oss /home/openssuser/.bashrc
chown openssuser:openssuser /home/openssuser/.bashrc
rm -f /root/.bashrc.oss
# add a MRNet topology file
echo "localhost.localdomain:0 => localhost.localdomain:1 ;" >
/root/.openss.top
cp /root/.openss.top /home/openssuser/
chown openssuser:openssuser /home/openssuser/.openss.top
rm -f /root/.openss.top
# start some apps...
echo "[Default]" > /root/.session-manual
echo "num_clients=2" >> /root/.session-manual
echo "0,RestartClientHint=3" >> /root/.session-manual
echo "0,Priority=50" >> /root/.session-manual
echo "0,RestartCommand=firefox /opt/doc/index.html" >> /root/.session-manual
echo "1,Program=firefox /opt/doc/index.html" >> /root/.session-manual
echo "1,RestartClientHint=3" >> /root/.session-manual
echo "1,Priority=50" >> /root/.session-manual
echo "1,RestartCommand=gnome-terminal" >> /root/.session-manual
echo "1,Program=gnome-terminal" >> /root/.session-manual
cp /root/.session-manual /home/openssuser/.gnome2/session-manual
chown openssuser:openssuser /home/openssuser/.gnome2/session-manual
rm -f /root/.session-manual
# setup preferences file for new user
mkdir /home/openssuser/.qt
echo "[ManageProcessesPanel]" > /root/.openspeedshoprc
echo "updateDisplayLineEdit=15" >> /root/.openspeedshoprc
echo "updateOnCheckBox=true" >> /root/.openspeedshoprc
echo "" >> /root/.openspeedshoprc
echo "[Source Panel]" >> /root/.openspeedshoprc
echo
"leftSideLineEdit0=/home/jeg/OpenSpeedShop/liveOSS/toyprograms-0.0.1" >>
/root/.openspeedshoprc
echo "leftSideLineEdit1=" >> /root/.openspeedshoprc
echo "leftSideLineEdit2=" >> /root/.openspeedshoprc
echo "leftSideLineEdit3=" >> /root/.openspeedshoprc
echo "leftSideLineEdit4=" >> /root/.openspeedshoprc
echo "leftSideLineEdit5=" >> /root/.openspeedshoprc
echo "leftSideLineEdit6=" >> /root/.openspeedshoprc
echo "leftSideLineEdit7=" >> /root/.openspeedshoprc
echo "leftSideLineEdit8=" >> /root/.openspeedshoprc
echo "leftSideLineEdit9=" >> /root/.openspeedshoprc
echo "rightSideLineEdit0=/home/openssuser" >> /root/.openspeedshoprc
echo "rightSideLineEdit1=" >> /root/.openspeedshoprc
echo "rightSideLineEdit2=" >> /root/.openspeedshoprc
echo "rightSideLineEdit3=" >> /root/.openspeedshoprc
echo "rightSideLineEdit4=" >> /root/.openspeedshoprc
echo "rightSideLineEdit5=" >> /root/.openspeedshoprc
echo "rightSideLineEdit6=" >> /root/.openspeedshoprc
echo "rightSideLineEdit7=" >> /root/.openspeedshoprc
echo "rightSideLineEdit8=" >> /root/.openspeedshoprc
echo "rightSideLineEdit9=" >> /root/.openspeedshoprc
echo "showLineNumbersCheckBox=true" >> /root/.openspeedshoprc
echo "showStatisticsCheckBox=false" >> /root/.openspeedshoprc
echo "" >> /root/.openspeedshoprc
echo "[Stats Panel]" >> /root/.openspeedshoprc
echo "advancedToolbarCheckBox=false" >> /root/.openspeedshoprc
echo "chartTypeComboBox=2" >> /root/.openspeedshoprc
echo "focusSourcePanelCheckBox=false" >> /root/.openspeedshoprc
echo "levelsToOpenLineEdit=-1" >> /root/.openspeedshoprc
echo "showMetadataCheckBox=true" >> /root/.openspeedshoprc
echo "showSkylineCheckBox=false" >> /root/.openspeedshoprc
echo "showSkylineLineEdit=25" >> /root/.openspeedshoprc
echo "showTextByLocationCheckBox=false" >> /root/.openspeedshoprc
echo "showTextByPercentCheckBox=true" >> /root/.openspeedshoprc
echo "showTextByValueCheckBox=false" >> /root/.openspeedshoprc
echo "showTextInChartCheckBox=true" >> /root/.openspeedshoprc
echo "showToolbarCheckBox=true" >> /root/.openspeedshoprc
echo "showTopNChartLineEdit=5" >> /root/.openspeedshoprc
echo "showTopNLineEdit=100" >> /root/.openspeedshoprc
echo "sortDecendingCheckBox=true" >> /root/.openspeedshoprc
echo "" >> /root/.openspeedshoprc
echo "[general]" >> /root/.openspeedshoprc
echo "allowPythonCommands=true" >> /root/.openspeedshoprc
echo "askAboutChangingArgs=true" >> /root/.openspeedshoprc
echo "askAboutSavingTheDatabase=true" >> /root/.openspeedshoprc
echo "globalFontFamily=Bitstream Charter" >> /root/.openspeedshoprc
echo "globalFontItalic=false" >> /root/.openspeedshoprc
echo "globalFontPointSize=10" >> /root/.openspeedshoprc
echo "globalFontWeight=75" >> /root/.openspeedshoprc
echo "globalRemoteShell=/usr/bin/rsh" >> /root/.openspeedshoprc
echo "helpLevelDefault=2" >> /root/.openspeedshoprc
echo "historyDefault=24" >> /root/.openspeedshoprc
echo "historyLimit=100" >> /root/.openspeedshoprc
echo "instrumentorIsOffline=true" >> /root/.openspeedshoprc
echo "lessRestrictiveComparisons=true" >> /root/.openspeedshoprc
echo "maxAsyncCommands=20" >> /root/.openspeedshoprc
echo "onRerunSaveCopyOfExperimentDatabase=true" >> /root/.openspeedshoprc
echo "saveExperimentDatabase=true" >> /root/.openspeedshoprc
echo "showGraphics=false" >> /root/.openspeedshoprc
echo "showSplashScreen=true" >> /root/.openspeedshoprc
echo "viewFieldSize=20" >> /root/.openspeedshoprc
echo "viewFullPath=false" >> /root/.openspeedshoprc
echo "viewMangledName=false" >> /root/.openspeedshoprc
echo "viewPrecision=6" >> /root/.openspeedshoprc
mkdir /root/.qt
chmod 644 /root/.openspeedshoprc
cp /root/.openspeedshoprc /root/.qt/openspeedshoprc
cp -r /root/.qt /home/openssuser/.
chown openssuser:openssuser -R /home/openssuser/.qt
rm /root/.openspeedshoprc
echo "localhost.localdomain ssh-rsa
AAAAB3NzaC1yc2EAAAABIwAAAQEApWX5IL5f9c0tmBbmuj3/+Wx/2s8Nv0eo04gom+46DWNL9OQqiLtzHbqzn6M9WA0500kUsS5ZYxPXAcAo6LtWBpJ8eqVIbgYbwVRf5K2Iprm1irK6gYzBh8+iTPdqyLj4bjVzecxuNDNyD0YJTwB+q84J/linTHKmqdPC4Pzl+bTa+Je9oan9uORe1k5BKKkm8sem6/V39EwlRePiJMuVtZPCwBtLspMgCA+9R2KuvyisnS5vDjwnwcZQaHzCTsi57isk/P//4x1RWX+6KEngjjpp5igjnN1DBaabfIhLTc09z9tDVPcBir7mg0fJ09kckA4BExip1fzVLqmM1NoPgw=="
> /root/.known_hosts
mkdir /root/.ssh
chmod 644 /root/.known_hosts
cp /root/.known_hosts /root/.ssh/known_hosts
cp -r /root/.ssh /home/openssuser/.
chown openssuser:openssuser -R /home/openssuser/.ssh
rm /root/.known_hosts
#move apps to /home/openssuser
#mkdir -p /home/openssuser/{mpi,openmp,sequential}
mkdir -p /home/openssuser/{mpi,sequential}
mv /opt/tempapps/mpi/smg2000 /home/openssuser/mpi/.
mv /opt/tempapps/mpi/nbody /home/openssuser/mpi/.
mv /opt/tempapps/sequential/smg2000 /home/openssuser/sequential/.
#mv /opt/tempapps/openmp/smg2000 /home/openssuser/openmp/
mv /opt/tempapps/sequential/forever /home/openssuser/sequential/.
mv /opt/tempapps/sequential/threads /home/openssuser/sequential/.
mv /opt/tempapps/sequential/mutatee /home/openssuser/sequential/.
mv /opt/tempapps/sequential/matmul /home/openssuser/sequential/.
chown openssuser:openssuser -R /home/openssuser/mpi
chown openssuser:openssuser -R /home/openssuser/sequential
rm -rf /opt/tempapps
rm -rf /tmp/*
EOF
%end
More information about the livecd
mailing list