Fedora 14 Update: libpri-1.4.12-1.fc14
updates at fedoraproject.org
updates at fedoraproject.org
Mon Jul 18 22:38:06 UTC 2011
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2011-9145
2011-07-08 17:19:13
--------------------------------------------------------------------------------
Name : libpri
Product : Fedora 14
Version : 1.4.12
Release : 1.fc14
URL : http://www.asterisk.org/
Summary : An implementation of Primary Rate ISDN
Description :
libpri is a C implementation of the Primary Rate ISDN specification.
It was based on the Bellcore specification SR-NWT-002343 for National
ISDN. As of May 12, 2001, it has been tested work with NI-2, Nortel
DMS-100, and Lucent 5E Custom protocols on switches from Nortel and
Lucent.
--------------------------------------------------------------------------------
Update Information:
The Asterisk Development Team announces the release of libpri version
1.4.12. This release is available for immediate download at
http://downloads.asterisk.org/pub/telephony/libpri/
The following are some of the issues resolved in this release:
* Add call transfer exchange of subaddresses support and fix PTMP call
transfer signaling.
* Invalid PTMP redirecting signaling as TE towards NT.
* Add Q931_IE_TIME_DATE to CONNECT message when in network mode.
(issue #18047 (JIRA PRI-114). Reported by: wuwu. Patched by rmudgett)
* Swap of master/slave in pri_enslave() incorrect.
(issue #18769 (JIRA PRI-120). Reported by: jcollie. Patched by jcollie)
* Fix I-frame retransmission quirks.
* Crash if NFAS swaps D channels on a call with an active timer.
* DMS-100 not receiving caller name anymore.
(issue #18822 (JIRA PRI-121). Reported by: cmorford. Patched by rmudgett)
* B channel lost by incoming call in BRI NT PTMP mode.
* Implement the mandatory T312 timer for NT PTMP broadcast SETUP calls.
This release contains several new features, among them:
1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support
2.) ETSI Advice Of Charge (AOC) support
3.) ETSI Explicit Call Transfer (ECT) support
4.) ETSI Call Waiting support for ISDN phones
5.) ETSI Malicious Call ID support
6.) Add Display IE text handling options.
For a full list of changes in this release, please see the ChangeLog:
http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12
--------------------------------------------------------------------------------
ChangeLog:
* Wed Jul 6 2011 Jeffrey C. Ollie <jeff at ocjtech.us> - 1.4.12-1
- The Asterisk Development Team announces the release of libpri version
- 1.4.12. This release is available for immediate download at
- http://downloads.asterisk.org/pub/telephony/libpri/
-
- The following are some of the issues resolved in this release:
-
- * Add call transfer exchange of subaddresses support and fix PTMP call
- transfer signaling.
-
- * Invalid PTMP redirecting signaling as TE towards NT.
-
- * Add Q931_IE_TIME_DATE to CONNECT message when in network mode.
- (issue #18047 (JIRA PRI-114). Reported by: wuwu. Patched by rmudgett)
-
- * Swap of master/slave in pri_enslave() incorrect.
- (issue #18769 (JIRA PRI-120). Reported by: jcollie. Patched by jcollie)
-
- * Fix I-frame retransmission quirks.
-
- * Crash if NFAS swaps D channels on a call with an active timer.
-
- * DMS-100 not receiving caller name anymore.
- (issue #18822 (JIRA PRI-121). Reported by: cmorford. Patched by rmudgett)
-
- * B channel lost by incoming call in BRI NT PTMP mode.
-
- * Implement the mandatory T312 timer for NT PTMP broadcast SETUP calls.
-
- This release contains several new features, among them:
-
- 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support
- 2.) ETSI Advice Of Charge (AOC) support
- 3.) ETSI Explicit Call Transfer (ECT) support
- 4.) ETSI Call Waiting support for ISDN phones
- 5.) ETSI Malicious Call ID support
- 6.) Add Display IE text handling options.
-
- For a full list of changes in this release, please see the ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12
* Tue Feb 8 2011 Jeffrey C. Ollie <jeff at ocjtech.us> - 1.4.12-0.3.beta3
-
- The following are some of the issues resolved in this beta release:
-
- * Prevent a CONNECT message from sending a CONNECT ACKNOWLEDGE in the
- wrong state.
- (issue #17360. Reported by: shawkris. Patched by rmudgett)
-
- * Made Q.921 delay events to Q.931 if the event could immediately
- generate response frames.
- (closes issue #17360. Reported by: shawkris. Patched by rmudgett)
-
- * BRI PTMP: Active channels not cleared when the interface goes down.
- (closes issue #17865. Reported by: wimpy. Patched by rmudgett)
-
- * Segfault in pri_schedule_del() - ctrl value is invalid.
- (closes issue #17522)
- (closes issue #18032. Reported by: schmoozecom. Patched by rmudgett)
-
- * Crash when receiving an unknown/unsupported message type.
- (closes issue #17968. Reported by: gelo. Patched by rmudgett)
-
- * B410P gets incoming call packets on ISDN but Asterisk doesn't see the
- call.
- (closes issue #18232. Reported by: lelio. Patched by rmudgett)
-
- * SABME flood on backup D-channel in NFAS configuration.
- (closes issue #18255. Reported by: bklang. Patched by rmudgett)
-
- * Asterisk is getting a "No D-channels available!" warning message every
- 4 seconds.
- (closes issue #17270. Reported by: jmls. Patched by rmudgett)
-
- This beta release contains several new features, among them:
-
- 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support
- 2.) ETSI Advice Of Charge (AOC) support
- 3.) ETSI Explicit Call Transfer (ECT) support
- 4.) ETSI Call Waiting support for ISDN phones
- 5.) ETSI Malicious Call ID support
-
- For a full list of changes in the current release candidate, please see
- the ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12-beta3
* Tue Feb 8 2011 Fedora Release Engineering <rel-eng at lists.fedoraproject.org> - 1.4.12-0.2.beta2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
* Fri Oct 8 2010 Jeffrey C. Ollie <jeff at ocjtech.us> - 1.4.12-0.2.beta2
- The following are some of the issues resolved in this beta release:
-
- * Fix issue where calling name is not successfully processed on inbound
- QSIG PRI calls from Mitel PBX.
- (Closes issue #17619. Reported by: jims8650. Patched by rmudgett)
-
- * Added missing code specified by Q.921 (Figure B.8 Page 85) when receive
- RNR in "Timer Recovery" state.
- (Closes issue #16791. Reported by: alecdavis. Patched by alecdavis)
-
- * Fixed issue where incoming calls specifying the channel using a slot
- map could not negotiate a B channel correctly.
-
- * Add support to receive ECMA-164 2nd edition OID name ROSE messages.
-
- * Fixed issue where ISDN BRI PTMP TE does not recover from line faults.
- (Closes issue #17570. Reported by: jcovert. Patched by rmudgett)
-
- * Q.921 improvements from comparing Q.921 SDL diagrams with implementation.
-
- * Q.921/Q.931 message debug output improvements.
-
- This beta release contains several new features, among them:
-
- 1.) ETSI and Q.SIG Call Completion Supplementary Service (CCSS) support
- 2.) ETSI Advice Of Charge (AOC) support
- 3.) ETSI Explicit Call Transfer (ECT) support
- 4.) ETSI Call Waiting support for ISDN phones
- 5.) ETSI Malicious Call ID support
-
- For a full list of changes in the current release candidate, please see
- the ChangeLog:
-
- http://downloads.asterisk.org/pub/telephony/libpri/releases/ChangeLog-1.4.12-beta2
--------------------------------------------------------------------------------
This update can be installed with the "yum" update program. Use
su -c 'yum update libpri' at the command line.
For more information, refer to "Managing Software with yum",
available at http://docs.fedoraproject.org/yum/.
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
More information about the package-announce
mailing list