rpms/torque/EL-6 README.Fedora, NONE, 1.1 .cvsignore, 1.14, 1.15 sources, 1.15, 1.16 torque.spec, 1.35, 1.36 README-localhost, 1.1, NONE
stevetraylen
stevetraylen at fedoraproject.org
Wed Jul 14 21:11:28 UTC 2010
- Previous message: rpms/kdebindings/devel kdebindings-4.4.92-sip4103.patch, NONE, 1.1 kdebindings.spec, 1.330, 1.331
- Next message: rpms/torque/devel README.Fedora, NONE, 1.1 config, NONE, 1.1 torque.spec, 1.35, 1.36 README-localhost, 1.1, NONE
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Author: stevetraylen
Update of /cvs/pkgs/rpms/torque/EL-6
In directory cvs01.phx2.fedoraproject.org:/tmp/cvs-serv9822/EL-6
Modified Files:
.cvsignore sources torque.spec
Added Files:
README.Fedora
Removed Files:
README-localhost
Log Message:
Something at least approching package guidelines.
--- NEW FILE README.Fedora ---
This README describes how to get the most basic working
torque service on a single host.
To setup a basic single-node localhost-only batch system, install the
torque-server, torque-mom, and torque-scheduler packages, and do something like
this:
1) Get your full hostname with
# /bin/hostname --long
e.g myhost.example.org
2) Edit /etc/torque/server_name
to contain the single line
myhost.example.org
3) Edit /etc/torque/mom/config
to contain the single line
$pbsserver myhost.example.org
4) Create a torque serverdb file.
# /usr/sbin/pbs_server -D -t create
Warning this will remove any existing serverdb
file located at /var/lib/torque/server_priv/serverdb
You will have to Ctrl^C the pbs_server command, it will
only take a moment to create this file.
5) Start the pbs_server and configure it.
service pbs_server start
# qmgr -c "s s scheduling=true"
# qmgr -c "c q batch queue_type=execution"
# qmgr -c "s q batch started=true"
# qmgr -c "s q batch enabled=true"
# qmgr -c "s q batch resources_default.nodes=1"
# qmgr -c "s q batch resources_default.walltime=3600"
# qmgr -c "s s default_queue=batch"
6) Add one batch worker to your pbs_server.
# qmgr -c "c n myhost.example.org"
7) Start the pbs_mom and pbs_sched deamons.
# service pbs_mom start
# service pbs_sched start
8) Use chkconfig to start the services at boot time.
# /sbin/chkconfig pbs_mom on
# /sbin/chkconfig pbs_server on
# /sbin/chkconfig pbs_sched on
9) Submit a test job.
As a user not as root run the following
$ qsub <<EOF
hostname
echo "Hi I am a batch job running in torque"
EOF
Index: .cvsignore
===================================================================
RCS file: /cvs/pkgs/rpms/torque/EL-6/.cvsignore,v
retrieving revision 1.14
retrieving revision 1.15
diff -u -p -r1.14 -r1.15
--- .cvsignore 13 Dec 2007 06:43:11 -0000 1.14
+++ .cvsignore 14 Jul 2010 21:11:28 -0000 1.15
@@ -1 +1 @@
-torque-2.1.10.tar.gz
+torque-2.4.8.tar.gz
Index: sources
===================================================================
RCS file: /cvs/pkgs/rpms/torque/EL-6/sources,v
retrieving revision 1.15
retrieving revision 1.16
diff -u -p -r1.15 -r1.16
--- sources 10 May 2010 10:50:40 -0000 1.15
+++ sources 14 Jul 2010 21:11:28 -0000 1.16
@@ -1 +1 @@
-30d3366432ad3506278f884ba797e2b2 torque-2.3.10.tar.gz
+56170b7fce63fed9ed0cc83ee5bd3e3a torque-2.4.8.tar.gz
Index: torque.spec
===================================================================
RCS file: /cvs/pkgs/rpms/torque/EL-6/torque.spec,v
retrieving revision 1.35
retrieving revision 1.36
diff -u -p -r1.35 -r1.36
--- torque.spec 10 May 2010 10:50:40 -0000 1.35
+++ torque.spec 14 Jul 2010 21:11:28 -0000 1.36
@@ -1,10 +1,3 @@
-
-# comment out snap if building a real release
-%define name torque
-%define version 2.3.10
-#%%define snap 200604251602
-%define release 1
-
# The following options are supported:
# --with server_name=hostname
# --with homedir=directory
@@ -12,26 +5,22 @@
# --with[out] gui
# --with[out] tcl
-
# Hrm, should we default to the name of the buildhost? That seems only
# slightly better than picking a hostname at random. This is exactly the kind
# of compile-time default that doesn't work well with distributable packages.
# Let's force the issue with the non-sensical "localhost".
-#
+#
# Note that "localhost" doesn't actually work. You must either define the
# correct hostname here, pass '--with server_name=foo' to rpmbuild, or be sure
# that $PBS_SERVER_HOME/server_name contains the correct hostname.
-%define server_name localhost
+%global server_name localhost
-# change as you wish
-%define use_rcp 0
-%define use_tcl 1
-%define build_gui 1
+%global use_rcp 0
+%global use_tcl 1
+%global build_gui 1
# these are non-defaults, but fit better into most RPM-based systems
-%define torquehomedir %_localstatedir/torque
-
-
+%global torquehomedir %{_localstatedir}/lib/torque
# --with/--without processing
# first, error if conflicting options are used
@@ -40,161 +29,352 @@
%{?_with_gui: %{?_without_gui: %{error: both _with_gui and _without_gui}}}
# did we find any --with options?
-%{?_with_rcp: %define use_rcp 1}
-%{?_with_tcl: %define use_tcl 1}
-%{?_with_gui: %define build_gui 1}
+%{?_with_rcp: %global use_rcp 1}
+%{?_with_tcl: %global use_tcl 1}
+%{?_with_gui: %global build_gui 1}
-%{?_with_server_name:%define server_name %(set -- %{_with_server_name}; echo $1 | grep -v with | sed 's/=//')}
-%{?_with_homedir:%define torquehomedir %(set -- %{_with_homedir}; echo $1 | grep -v with | sed 's/=//')}
+%{?_with_server_name:%global server_name %(set -- %{_with_server_name}; echo $1 | grep -v with | sed 's/=//')}
+%{?_with_homedir:%global torquehomedir %(set -- %{_with_homedir}; echo $1 | grep -v with | sed 's/=//')}
# did we find any --without options?
-%{?_without_rcp: %define use_rcp 0}
-%{?_without_tcl: %define use_tcl 0}
-%{?_without_gui: %define build_gui 0}
+%{?_without_rcp: %global use_rcp 0}
+%{?_without_tcl: %global use_tcl 0}
+%{?_without_gui: %global build_gui 0}
# Set up all options as disabled
-%define rcpflags --with-rcp=/usr/bin/scp
-%define tclflags --without-tcl
-%define guiflags --disable-gui
+%global rcpflags --with-rcp=/usr/bin/scp
+%global tclflags --without-tcl
+%global guiflags --disable-gui
# Enable options that we want
-%if %use_rcp
-%define rcpflags --with-rcp=mom_rcp
+%if %{use_rcp}
+%global rcpflags --with-rcp=mom_rcp
%endif
-%if %build_gui
-%define guiflags --enable-gui
+%if %{build_gui}
+%global guiflags --enable-gui
%endif
-%if %use_tcl
-%if %build_gui
-%define tclflags --with-tcl --with-tk
+%if %{use_tcl}
+%if %{build_gui}
+%global tclflags --with-tcl --with-tk
%else
-%define tclflags --with-tcl --without-tk
+%global tclflags --with-tcl --without-tk
%endif
%endif
# finish up the configs...
-%define server_nameflags --with-default-server=%{server_name}
-
-
-%define shared_description %(echo -e "TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource \\nmanager providing control over batch jobs and distributed compute nodes. \\nTORQUE is based on OpenPBS version 2.3.12 and incorporates scalability, \\nfault tolerance, and feature extension patches provided by USC, NCSA, OSC, \\nthe U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many \\nother leading edge HPC organizations.\\n\\nThis build was configured with:\\n %{server_nameflags}\\n %{tclflags}\\n %{guiflags}\\n %{rcpflags}\\n")
-
+%global server_nameflags --with-default-server=%{server_name}
-Summary: Tera-scale Open-source Resource and QUEue manager
-Name: %{name}
-Version: %{version}
-Release: %{?snap:0.%{release}.%{snap}cvs}%{!?snap:%{release}}%{?dist}
-Source: torque-%{version}%{?snap:-snap.%snap}.tar.gz
-Source2: xpbs.desktop
-Source3: xpbsmon.desktop
-Source4: xpbs.png
-Source5: xpbsmon.png
-Source6: README-localhost
-Source7: pbs-config-multilib
-License: OpenPBS
-Group: System Environment/Daemons
-URL: http://www.clusterresources.com/products/torque/
-BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Provides: pbs
-BuildRequires: desktop-file-utils, pam-devel, xauth, readline-devel, ncurses-devel
-Requires(posttrans): /usr/sbin/alternatives
-Requires(preun): /usr/sbin/alternatives
-Conflicts: pbspro, openpbs, openpbs-oscar
-Obsoletes: torque-localhost
-
-%if %use_tcl
+Name: torque
+Version: 2.4.8
+Release: 2%{?dist}
+Summary: Tera-scale Open-source Resource and QUEue manager
+Source0: http://www.clusterresources.com/downloads/%{name}/%{name}-%{version}.tar.gz
+Source2: xpbs.desktop
+Source3: xpbsmon.desktop
+Source4: xpbs.png
+Source5: xpbsmon.png
+Source6: README.Fedora
+Source7: pbs-config-multilib
+Source8: config
+License: OpenPBS
+Group: System Environment/Daemons
+URL: http://www.clusterresources.com/products/torque/
+BuildRequires: desktop-file-utils
+BuildRequires: pam-devel
+BuildRequires: xauth
+BuildRequires: readline-devel
+BuildRequires: ncurses-devel
+%if %{use_tcl}
BuildRequires: tcl-devel
%endif
-%if %build_gui
+%if %{build_gui}
BuildRequires: tk-devel
-%else
-Obsoletes: torque-gui
-%endif
-%if ! %use_rcp
-Requires: openssh-clients
%endif
%description
-%shared_description
+TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource
+manager providing control over batch jobs and distributed compute nodes.
+TORQUE is based on OpenPBS version 2.3.12 and incorporates scalability,
+fault tolerance, and feature extension patches provided by USC, NCSA, OSC,
+the U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many
+other leading edge HPC organizations.
+
This package holds just a few shared files and directories.
+%package client
+Group: Applications/System
+Summary: Client part of TORQUE
+Requires: %{name}-libs = %{version}-%{release}
+Requires(posttrans): chkconfig
+Requires(preun): chkconfig
-%prep
-%setup -q -n torque-%{version}%{?snap:-snap.%snap}
+%description client
+TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource
+manager providing control over batch jobs and distributed compute nodes.
+TORQUE is based on OpenPBS version 2.3.12 and incorporates scalability,
+fault tolerance, and feature extension patches provided by USC, NCSA, OSC,
+the U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many
+other leading edge HPC organizations.
+
+This package holds the command-line client programs.
+
+%package docs
+Group: Documentation
+Summary: Documentation files for TORQUE
+Requires: %{name} = %{version}-%{release}
+BuildArch: noarch
+
+%description docs
+TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource
+manager providing control over batch jobs and distributed compute nodes.
+TORQUE is based on OpenPBS version 2.3.12 and incorporates scalability,
+fault tolerance, and feature extension patches provided by USC, NCSA, OSC,
+the U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many
+other leading edge HPC organizations.
-%__install -pm 644 %{SOURCE2} %{SOURCE3} %{SOURCE4} %{SOURCE5} %{SOURCE6} %{SOURCE7} .
+This package holds the documentation files.
+%package gui
+Group: Applications/System
+Summary: Graphical clients for TORQUE
+Requires: torque-client = %{version}-%{release}
+
+%description gui
+TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource
+manager providing control over batch jobs and distributed compute nodes.
+TORQUE is based on OpenPBS version 2.3.12 and incorporates scalability,
+fault tolerance, and feature extension patches provided by USC, NCSA, OSC,
+the U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many
+other leading edge HPC organizations.
+
+This package holds the graphical clients.
+
+%package libs
+Summary: Run-time libs for programs which will use the %{name} library
+Group: Development/Libraries
+Requires: torque = %{version}-%{release}
+Obsoletes: libtorque < 2.4.8-2
+Provides: libtorque = %{version}-%{release}
+
+%description libs
+TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource
+manager providing control over batch jobs and distributed compute nodes.
+TORQUE is based on OpenPBS version 2.3.12 and incorporates scalability,
+fault tolerance, and feature extension patches provided by USC, NCSA, OSC,
+the U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many
+other leading edge HPC organizations.
+
+This package includes the shared libraries necessary for running TORQUE
+programs.
+
+%package devel
+Summary: Development tools for programs which will use the %{name} library
+Group: Development/Libraries
+Requires: torque-libs = %{version}-%{release}
+Obsoletes: libtorque-devel < 2.4.8-2
+Provides: libtorque-devel = %{version}-%{release}
+
+%description devel
+TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource
+manager providing control over batch jobs and distributed compute nodes.
+TORQUE is based on OpenPBS version 2.3.12 and incorporates scalability,
+fault tolerance, and feature extension patches provided by USC, NCSA, OSC,
+the U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many
+other leading edge HPC organizations.
+
+This package includes the header files and static libraries
+necessary for developing programs which will use %{name}.
+
+%package mom
+Group: System Environment/Daemons
+Summary: Node execution daemon for TORQUE
+Requires: torque-libs = %{version}-%{release}
+%if ! %{use_rcp}
+Requires: openssh-clients
+%endif
+Requires(post): chkconfig
+Requires(preun): chkconfig
+Requires(preun): initscripts
+
+
+%description mom
+TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource
+manager providing control over batch jobs and distributed compute nodes.
+TORQUE is based on OpenPBS version 2.3.12 and incorporates scalability,
+fault tolerance, and feature extension patches provided by USC, NCSA, OSC,
+the U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many
+other leading edge HPC organizations.
+
+This package holds the execute daemon required on every node.
+
+%package pam
+Summary: PAM module for TORQUE MOM nodes
+Group: System Environment/Base
+
+%description pam
+TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource
+manager providing control over batch jobs and distributed compute nodes.
+TORQUE is based on OpenPBS version 2.3.12 and incorporates scalability,
+fault tolerance, and feature extension patches provided by USC, NCSA, OSC,
+the U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many
+other leading edge HPC organizations.
+
+A simple PAM module to authorize users on PBS MOM nodes with a running job.
+
+%package scheduler
+Group: System Environment/Daemons
+Summary: Simple fifo scheduler for TORQUE
+Requires: torque-libs = %{version}-%{release}
+Requires(post): chkconfig
+Requires(preun): chkconfig
+Requires(preun): initscripts
+
+%description scheduler
+TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource
+manager providing control over batch jobs and distributed compute nodes.
+TORQUE is based on OpenPBS version 2.3.12 and incorporates scalability,
+fault tolerance, and feature extension patches provided by USC, NCSA, OSC,
+the U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many
+other leading edge HPC organizations.
+
+This package holds the fifo C scheduler.
+
+%package server
+Group: System Environment/Daemons
+Summary: The main part of TORQUE
+Requires: torque-libs = %{version}-%{release}
+%if ! %{use_rcp}
+Requires: openssh-server
+%endif
+Requires(post): chkconfig
+Requires(preun): chkconfig
+Requires(preun): initscripts
+
+%description server
+TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource
+manager providing control over batch jobs and distributed compute nodes.
+TORQUE is based on OpenPBS version 2.3.12 and incorporates scalability,
+fault tolerance, and feature extension patches provided by USC, NCSA, OSC,
+the U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many
+other leading edge HPC organizations.
+
+This package holds the server.
+
+%prep
+%setup -q
+install -pm 644 %{SOURCE2} %{SOURCE3} %{SOURCE4} %{SOURCE5} \
+ %{SOURCE6} %{SOURCE7} %{SOURCE8} .
+# rm x bit on some documentation.
+chmod 644 torque.setup
%build
-%configure --disable-gcc-warnings \
- --includedir=%{_includedir}/torque \
+CFLAGS="%{optflags} -Wno-overlength-strings"
+%configure --includedir=%{_includedir}/torque \
--with-server-home=%{torquehomedir} --with-pam=/%{_lib}/security \
- --with-sendmail=/usr/sbin/sendmail \
+ --with-sendmail=%{_sbindir}/sendmail --disable-static \
%{server_nameflags} %{guiflags} %{tclflags} %{rcpflags}
-%__cp -vf pbs-config-multilib pbs-config
-%__make %{?_smp_mflags}
-
+cp -vf pbs-config-multilib pbs-config
+make %{?_smp_mflags}
+
+for daemon in pbs_mom pbs_sched pbs_server
+do
+sed -i -e 's|^PBS_HOME=.*|PBS_HOME=%{torquehomedir}|' \
+ -e 's|^PBS_DAEMON=.*|PBS_DAEMON=%{_sbindir}/'$daemon'|' \
+ -e 's|chkconfig: 345|chkconfig: -|' \
+ contrib/init.d/$daemon
+done
%install
-%__rm -rf "$RPM_BUILD_ROOT"
-%__make install DESTDIR=$RPM_BUILD_ROOT INSTALL="%{__install} -p"
+make DESTDIR=%{buildroot} INSTALL="install -p" install
# remove files we don't need
-%__rm -f $RPM_BUILD_ROOT/%_libdir/*.la
-%__rm -f $RPM_BUILD_ROOT/%_libdir/*/buildindex
-%__rm -f $RPM_BUILD_ROOT/%{_lib}/security/pam_pbssimpleauth.{a,la}
-touch -r pbs-config-multilib $RPM_BUILD_ROOT/%{_bindir}/pbs-config
+rm -f %{buildroot}%{_libdir}/*.la
+rm -f %{buildroot}%{_libdir}/*/buildindex
+rm -f %{buildroot}/%{_lib}/security/pam_pbssimpleauth.{a,la}
+mkdir -p %{buildroot}%{_bindir}
+touch -r pbs-config-multilib %{buildroot}%{_bindir}/pbs-config
# install initscripts
-%__mkdir_p $RPM_BUILD_ROOT%{_initrddir}
-for daemon in pbs_mom pbs_sched pbs_server; do
- %__sed -e 's|^PBS_HOME=.*|PBS_HOME=%{torquehomedir}|' \
- -e 's|^PBS_DAEMON=.*|PBS_DAEMON=%{_sbindir}/'$daemon'|' \
- -e 's|chkconfig: 345|chkconfig: -|' \
- < contrib/init.d/$daemon > $RPM_BUILD_ROOT%{_initrddir}/$daemon
- %__chmod 755 $RPM_BUILD_ROOT%{_initrddir}/$daemon
-done
+mkdir -p %{buildroot}%{_initrddir}
+install -p -m 755 contrib/init.d/pbs_mom %{buildroot}%{_initrddir}/pbs_mom
+install -p -m 755 contrib/init.d/pbs_sched %{buildroot}%{_initrddir}/pbs_sched
+install -p -m 755 contrib/init.d/pbs_server %{buildroot}%{_initrddir}/pbs_server
%if %{build_gui}
# This is really trivial, but cleans up an rpmlint warning
-%__sed -i -e 's|%_lib/../||' $RPM_BUILD_ROOT%{_bindir}/xpbs
-
-# install .desktop files and my ugly icons
-desktop-file-install --vendor fedora \
- --dir $RPM_BUILD_ROOT%{_datadir}/applications \
- --add-category X-Fedora \
- xpbs.desktop
-desktop-file-install --vendor fedora \
- --dir $RPM_BUILD_ROOT%{_datadir}/applications \
- --add-category X-Fedora \
- xpbsmon.desktop
-%__install -d $RPM_BUILD_ROOT%{_datadir}/pixmaps
-%__install -p -m0644 xpbs.png xpbsmon.png $RPM_BUILD_ROOT%{_datadir}/pixmaps
+sed -i -e 's|%{_lib}/../||' %{buildroot}%{_bindir}/xpbs
+desktop-file-install --dir %{buildroot}%{_datadir}/applications xpbs.desktop
+desktop-file-install --dir %{buildroot}%{_datadir}/applications xpbsmon.desktop
+install -d %{buildroot}%{_datadir}/pixmaps
+install -p -m0644 xpbs.png xpbsmon.png %{buildroot}%{_datadir}/pixmaps
%endif
-
# alternatives stuff
for bin in qalter qdel qhold qrls qselect qstat qsub
do
- mv $RPM_BUILD_ROOT%{_bindir}/$bin $RPM_BUILD_ROOT%{_bindir}/${bin}-torque
- mv $RPM_BUILD_ROOT%{_mandir}/man1/${bin}.1 \
- $RPM_BUILD_ROOT%{_mandir}/man1/${bin}-torque.1
+ mv %{buildroot}%{_bindir}/$bin %{buildroot}%{_bindir}/${bin}-torque
+ mv %{buildroot}%{_mandir}/man1/${bin}.1 \
+ %{buildroot}%{_mandir}/man1/${bin}-torque.1
done
+# Relocate configuration files.
+mkdir -p %{buildroot}%{_sysconfdir}/torque
+pushd %{buildroot}%{torquehomedir}
+mv pbs_environment %{buildroot}%{_sysconfdir}/torque
+mv server_name %{buildroot}%{_sysconfdir}/torque
+ln -s %{_sysconfdir}/torque/pbs_environment .
+ln -s %{_sysconfdir}/torque/server_name .
+popd
+
+# Relocate mom_logs to /var/log
+mkdir -p %{buildroot}%{_var}/log/torque
+pushd %{buildroot}%{torquehomedir}
+mv mom_logs %{buildroot}%{_var}/log/torque
+ln -s %{_var}/log/torque/mom_logs .
+popd
+
+# Install mom_priv/config file to /etc/torque/mom
+mkdir -p %{buildroot}%{_sysconfdir}/torque/mom
+install -p -m 644 config %{buildroot}%{_sysconfdir}/torque/mom/config
+pushd %{buildroot}%{torquehomedir}/mom_priv
+ln -s %{_sysconfdir}/torque/mom/config .
+popd
+
+# Install sched_config files to /etc/torque/sched
+mkdir -p %{buildroot}%{_sysconfdir}/torque/sched
+pushd %{buildroot}%{torquehomedir}/sched_priv
+for CONFIG in dedicated_time holidays resource_group sched_config ; do
+ mv $CONFIG %{buildroot}%{_sysconfdir}/torque/sched/.
+ ln -s %{_sysconfdir}/torque/sched/$CONFIG .
+done
+popd
-%clean
-%__rm -rf "$RPM_BUILD_ROOT"
+# Relocate sched_logs to /var/log
+pushd %{buildroot}%{torquehomedir}
+mv sched_logs %{buildroot}%{_var}/log/torque
+ln -s %{_var}/log/torque/sched_logs .
+popd
+
+# Relocate server_logs to /var/log
+pushd %{buildroot}%{torquehomedir}
+mv server_logs %{buildroot}%{_var}/log/torque
+ln -s %{_var}/log/torque/server_logs .
+popd
+%clean
+rm -rf %{buildroot}
+
%post
-if %__grep -q "PBS services" /etc/services;then
+if grep -q "PBS services" /etc/services;then
: PBS services already installed
else
- cat<<-__EOF__>>/etc/services
+ cat<<__EOF__>>/etc/services
# Standard PBS services
pbs 15001/tcp # pbs server (pbs_server)
pbs 15001/udp # pbs server (pbs_server)
@@ -207,137 +387,6 @@ pbs_sched 15004/udp # sche
__EOF__
fi
-
-%files
-%defattr(-, root, root)
-%doc README.torque torque.setup Release_Notes CHANGELOG PBS_License.txt README-localhost
-%config(noreplace) %{torquehomedir}/pbs_environment
-%config(noreplace) %{torquehomedir}/server_name
-%dir %{torquehomedir}
-%{torquehomedir}/aux
-%{torquehomedir}/spool
-
-
-%package docs
-Group: Documentation
-Summary: Documentation files for TORQUE
-Requires: %{name} = %{?epoch:%{epoch}:}%{version}-%{release}
-Provides: pbs-docs
-%description docs
-%shared_description
-This package holds the documentation files.
-
-%files docs
-%defattr(-, root, root)
-%doc doc/admin_guide.ps
-%{_mandir}/man*/*
-%exclude %{_mandir}/man1/qsub-torque.1.gz
-%exclude %{_mandir}/man1/qalter-torque.1.gz
-%exclude %{_mandir}/man1/qdel-torque.1.gz
-%exclude %{_mandir}/man1/qhold-torque.1.gz
-%exclude %{_mandir}/man1/qrls-torque.1.gz
-%exclude %{_mandir}/man1/qselect-torque.1.gz
-%exclude %{_mandir}/man1/qstat-torque.1.gz
-
-
-%package scheduler
-Group: System Environment/Daemons
-Summary: Simple fifo scheduler for TORQUE
-Requires: %{name} = %{?epoch:%{epoch}:}%{version}-%{release}
-Provides: pbs-scheduler
-%description scheduler
-%shared_description
-This package holds the fifo C scheduler.
-
-%files scheduler
-%defattr(-, root, root)
-%attr(0755, root, root) %{_sbindir}/pbs_sched
-%attr(0755, root, root) %{_sbindir}/qschedd
-%{_initrddir}/pbs_sched
-%dir %{torquehomedir}/sched_priv
-%config(noreplace) %{torquehomedir}/sched_priv/*
-%{torquehomedir}/sched_logs
-
-%post scheduler
-/sbin/chkconfig --add pbs_sched
-
-%preun scheduler
-if [ $1 -eq 0 ]; then
- /sbin/service pbs_sched stop
- /sbin/chkconfig --del pbs_sched
-fi
-
-
-%package server
-Group: System Environment/Daemons
-Summary: The main part of TORQUE
-Requires: %{name} = %{?epoch:%{epoch}:}%{version}-%{release}
-Provides: pbs-server
-%description server
-%shared_description
-This package holds the server.
-
-%files server
-%defattr(-, root, root)
-%attr(0755, root, root) %{_sbindir}/pbs_server
-%attr(0755, root, root) %{_sbindir}/qserverd
-%attr(0755, root, root) %{_sbindir}/momctl
-%{_initrddir}/pbs_server
-%{torquehomedir}/server_logs
-%{torquehomedir}/server_priv
-
-%post server
-/sbin/chkconfig --add pbs_server
-
-%preun server
-if [ $1 -eq 0 ]; then
- /sbin/service pbs_server stop
- /sbin/chkconfig --del pbs_server
-fi
-
-
-%package mom
-Group: System Environment/Daemons
-Summary: Node execution daemon for TORQUE
-Requires: %{name} = %{?epoch:%{epoch}:}%{version}-%{release}
-Provides: pbs-mom
-%description mom
-%shared_description
-This package holds the execute daemon required on every node.
-
-%files mom
-%defattr(-, root, root)
-%attr(0755, root, root) %{_sbindir}/pbs_mom
-%attr(0755, root, root) %{_sbindir}/qnoded
-%attr(0755, root, root) %{_bindir}/pbs_track
-%{_initrddir}/pbs_mom
-%if %{use_rcp}
-%attr(4755 root root) %{_sbindir}/pbs_rcp
-%endif
-%{torquehomedir}/mom_priv
-%{torquehomedir}/mom_logs
-%{torquehomedir}/checkpoint
-%{torquehomedir}/undelivered
-
-%post mom
-/sbin/chkconfig --add pbs_mom
-
-%preun mom
-if [ $1 -eq 0 ]; then
- /sbin/service pbs_mom stop
- /sbin/chkconfig --del pbs_mom
-fi
-
-
-%package client
-Group: Applications/System
-Summary: Client part of TORQUE
-Requires: %{name} = %{?epoch:%{epoch}:}%{version}-%{release}
-Provides: pbs-client
-%description client
-%shared_description
-This package holds the command-line client programs.
-
%posttrans client
/usr/sbin/alternatives --install %{_bindir}/qsub qsub %{_bindir}/qsub-torque 10 \
--slave %{_mandir}/man1/qsub.1.gz qsub-man \
@@ -366,8 +415,52 @@ if [ $1 -eq 0 ]; then
/usr/sbin/alternatives --remove qsub %{_bindir}/qsub-torque
fi
+%post libs -p /sbin/ldconfig
+%postun libs -p /sbin/ldconfig
+
+%post mom
+/sbin/chkconfig --add pbs_mom
+
+%preun mom
+if [ $1 -eq 0 ]; then
+ /sbin/service pbs_mom stop >/dev/null 2>&1
+ /sbin/chkconfig --del pbs_mom
+fi
+
+%post scheduler
+/sbin/chkconfig --add pbs_sched
+
+%preun scheduler
+if [ $1 -eq 0 ]; then
+ /sbin/service pbs_sched stop >/dev/null 2>&1
+ /sbin/chkconfig --del pbs_sched
+fi
+
+%post server
+/sbin/chkconfig --add pbs_server
+
+%preun server
+if [ $1 -eq 0 ]; then
+ /sbin/service pbs_server stop >/dev/null 2>&1
+ /sbin/chkconfig --del pbs_server
+fi
+
+%files
+%defattr(-, root, root, -)
+%doc README.torque torque.setup Release_Notes
+%doc CHANGELOG PBS_License.txt README.Fedora
+%dir %{torquehomedir}
+%dir %{torquehomedir}/aux
+%dir %{torquehomedir}/spool
+%dir %{torquehomedir}/undelivered
+%{torquehomedir}/pbs_environment
+%{torquehomedir}/server_name
+%config(noreplace) %{_sysconfdir}/torque/pbs_environment
+%config(noreplace) %{_sysconfdir}/torque/server_name
+
+
%files client
-%defattr(-, root, root)
+%defattr(-, root, root, -)
%{_bindir}/q*
%{_bindir}/chk_tree
%{_bindir}/hostn
@@ -375,37 +468,110 @@ fi
%{_bindir}/pbsdsh
%{_bindir}/pbsnodes
%{_bindir}/printjob
-%{_bindir}/printtracking
%{_bindir}/printserverdb
+%{_bindir}/printtracking
%{_bindir}/tracejob
-%attr(4755 root root) %{_sbindir}/pbs_iff
+%{_sbindir}/momctl
+%attr(4755, root, root) %{_sbindir}/pbs_iff
%{_sbindir}/pbs_demux
-%if %use_tcl
+%if %{use_tcl}
%{_bindir}/pbs_tclsh
%endif
-%{_mandir}/man1/qsub-torque.1.gz
-%{_mandir}/man1/qalter-torque.1.gz
-%{_mandir}/man1/qdel-torque.1.gz
-%{_mandir}/man1/qhold-torque.1.gz
-%{_mandir}/man1/qrls-torque.1.gz
-%{_mandir}/man1/qselect-torque.1.gz
-%{_mandir}/man1/qstat-torque.1.gz
+%{_mandir}/man1/qsub-torque.1.*
+%{_mandir}/man1/qalter-torque.1.*
+%{_mandir}/man1/qdel-torque.1.*
+%{_mandir}/man1/qhold-torque.1.*
+%{_mandir}/man1/qrls-torque.1.*
+%{_mandir}/man1/qselect-torque.1.*
+%{_mandir}/man1/qstat-torque.1.*
-%package gui
-Group: Applications/System
-Summary: Graphical clients for TORQUE
-Requires: %{name}-client = %{?epoch:%{epoch}:}%{version}-%{release}
-Provides: xpbs xpbsmon
-Provides: %{name}-x11tools
-%description gui
-%shared_description
-This package holds the graphical clients.
+%files docs
+%defattr(-, root, root, -)
+%doc doc/admin_guide.ps
+%{_mandir}/man1/basl2c.1.*
+%{_mandir}/man1/nqs2pbs.1.*
+%{_mandir}/man1/pbs.1.*
+%{_mandir}/man1/pbsdsh.1.*
+%{_mandir}/man1/qchkpt.1.*
+%{_mandir}/man1/qmgr.1.*
+%{_mandir}/man1/qmove.1.*
+%{_mandir}/man1/qmsg.1.*
+%{_mandir}/man1/qorder.1.*
+%{_mandir}/man1/qrerun.1.*
+%{_mandir}/man1/qsig.1.*
+%{_mandir}/man1/xpbs.1.*
+%{_mandir}/man1/xpbsmon.1.*
+%{_mandir}/man3/pbs_alterjob.3.*
+%{_mandir}/man3/pbs_connect.3.*
+%{_mandir}/man3/pbs_default.3.*
+%{_mandir}/man3/pbs_deljob.3.*
+%{_mandir}/man3/pbs_disconnect.3.*
+%{_mandir}/man3/pbs_geterrmsg.3.*
+%{_mandir}/man3/pbs_holdjob.3.*
+%{_mandir}/man3/pbs_locate.3.*
+%{_mandir}/man3/pbs_manager.3.*
+%{_mandir}/man3/pbs_movejob.3.*
+%{_mandir}/man3/pbs_msgjob.3.*
+%{_mandir}/man3/pbs_orderjob.3.*
+%{_mandir}/man3/pbs_rerunjob.3.*
+%{_mandir}/man3/pbs_rescquery.3.*
+%{_mandir}/man3/pbs_rescreserve.3.*
+%{_mandir}/man3/pbs_rlsjob.3.*
+%{_mandir}/man3/pbs_runjob.3.*
+%{_mandir}/man3/pbs_selectjob.3.*
+%{_mandir}/man3/pbs_selstat.3.*
+%{_mandir}/man3/pbs_sigjob.3.*
+%{_mandir}/man3/pbs_stagein.3.*
+%{_mandir}/man3/pbs_statjob.3.*
+%{_mandir}/man3/pbs_statnode.3.*
+%{_mandir}/man3/pbs_statque.3.*
+%{_mandir}/man3/pbs_statserver.3.*
+%{_mandir}/man3/pbs_submit.3.*
+%{_mandir}/man3/pbs_terminate.3.*
+%{_mandir}/man3/rpp.3.*
+%{_mandir}/man3/tm.3.*
+%{_mandir}/man7/pbs_job_attributes.7.*
+%{_mandir}/man7/pbs_queue_attributes.7.*
+%{_mandir}/man7/pbs_resources.7.*
+%{_mandir}/man7/pbs_resources_aix4.7.*
+%{_mandir}/man7/pbs_resources_aix5.7.*
+%{_mandir}/man7/pbs_resources_darwin.7.*
+%{_mandir}/man7/pbs_resources_digitalunix.7.*
+%{_mandir}/man7/pbs_resources_freebsd.7.*
+%{_mandir}/man7/pbs_resources_fujitsu.7.*
+%{_mandir}/man7/pbs_resources_hpux10.7.*
+%{_mandir}/man7/pbs_resources_hpux11.7.*
+%{_mandir}/man7/pbs_resources_irix5.7.*
+%{_mandir}/man7/pbs_resources_irix6.7.*
+%{_mandir}/man7/pbs_resources_irix6array.7.*
+%{_mandir}/man7/pbs_resources_linux.7.*
+%{_mandir}/man7/pbs_resources_netbsd.7.*
+%{_mandir}/man7/pbs_resources_solaris5.7.*
+%{_mandir}/man7/pbs_resources_solaris7.7.*
+%{_mandir}/man7/pbs_resources_sp2.7.*
+%{_mandir}/man7/pbs_resources_sunos4.7.*
+%{_mandir}/man7/pbs_resources_unicos8.7.*
+%{_mandir}/man7/pbs_resources_unicosmk2.7.*
+%{_mandir}/man7/pbs_server_attributes.7.*
+%{_mandir}/man8/pbs_mom.8.*
+%{_mandir}/man8/pbs_sched.8.*
+%{_mandir}/man8/pbs_sched_basl.8.*
+%{_mandir}/man8/pbs_sched_cc.8.*
+%{_mandir}/man8/pbs_sched_tcl.8.*
+%{_mandir}/man8/pbs_server.8.*
+%{_mandir}/man8/pbsnodes.8.*
+%{_mandir}/man8/qdisable.8.*
+%{_mandir}/man8/qenable.8.*
+%{_mandir}/man8/qrun.8.*
+%{_mandir}/man8/qstart.8.*
+%{_mandir}/man8/qstop.8.*
+%{_mandir}/man8/qterm.8.*
%if %{build_gui}
%files gui
-%defattr(-, root, root)
+%defattr(-, root, root, -)
%{_bindir}/pbs_wish
%{_bindir}/xpbs
%{_bindir}/xpbsmon
@@ -415,71 +581,89 @@ This package holds the graphical clients
%{_datadir}/pixmaps/*.png
%endif
-
-%package -n lib%{name}
-Summary: Run-time libs for programs which will use the %{name} library
-Group: Development/Libraries
-Requires: %{name} = %{?epoch:%{epoch}:}%{version}-%{release}
-
-%description -n lib%{name}
-%shared_description
-This package includes the shared libraries
-necessary for running TORQUE programs.
-
-%files -n lib%{name}
-%defattr(-, root, root)
+%files libs
+%defattr(-, root, root, -)
%{_libdir}/*.so.*
-%post -n lib%{name} -p /sbin/ldconfig
-%postun -n lib%{name} -p /sbin/ldconfig
-
-%package -n lib%{name}-devel
-Summary: Development tools for programs which will use the %{name} library
-Group: Development/Libraries
-Requires: lib%{name} = %{?epoch:%{epoch}:}%{version}-%{release}
-
-%description -n lib%{name}-devel
-%shared_description
-This package includes the header files and static libraries
-necessary for developing programs which will use %{name}.
-
-%files -n lib%{name}-devel
-%defattr(-, root, root)
-%{_libdir}/*.a
+%files devel
+%defattr(-, root, root, -)
%{_libdir}/*.so
%{_includedir}/torque
%{_bindir}/pbs-config
-%package pam
-Summary: PAM module for TORQUE MOM nodes
-Group: System Environment/Base
-
-%description pam
-%shared_description
-A simple PAM module to authorize users on PBS MOM nodes with a running job.
+%files mom
+%defattr(-, root, root, -)
+%{_sbindir}/pbs_mom
+%{_sbindir}/qnoded
+%{_sbindir}/pbs_demux
+%{_bindir}/pbs_track
+%{_initrddir}/pbs_mom
+%if %{use_rcp}
+%attr(4755, root, root) %{_sbindir}/pbs_rcp
+%endif
+%{torquehomedir}/mom_priv
+%{torquehomedir}/mom_logs
+%{torquehomedir}/checkpoint
+%{torquehomedir}/undelivered
+%dir %{_var}/log/torque
+%dir %{_var}/log/torque/mom_logs
+%dir %{_sysconfdir}/torque/mom
+%config(noreplace) %{_sysconfdir}/torque/mom/config
%files pam
-%defattr(-, root, root)
+%defattr(-, root, root, -)
%doc src/pam/README.pam
/%{_lib}/security/pam_pbssimpleauth.so
+%files scheduler
+%defattr(-, root, root, -)
+%attr(0755, root, root) %{_sbindir}/pbs_sched
+%{_sbindir}/qschedd
+%{_initrddir}/pbs_sched
+%dir %{torquehomedir}/sched_priv
+%config(noreplace) %{torquehomedir}/sched_priv/*
+%{torquehomedir}/sched_logs
+%dir %{_var}/log/torque/sched_logs
+%dir %{_sysconfdir}/torque/sched
+%config(noreplace) %{_sysconfdir}/torque/sched/dedicated_time
+%config(noreplace) %{_sysconfdir}/torque/sched/holidays
+%config(noreplace) %{_sysconfdir}/torque/sched/resource_group
+%config(noreplace) %{_sysconfdir}/torque/sched/sched_config
+
+%files server
+%defattr(-, root, root, -)
+%attr(0755, root, root) %{_sbindir}/pbs_server
+%attr(0755, root, root) %{_sbindir}/momctl
+%{_sbindir}/qserverd
+%{_initrddir}/pbs_server
+%dir %{_var}/log/torque/server_logs
+%{torquehomedir}/server_logs
+%{torquehomedir}/server_priv
+
%changelog
-* Fri Feb 12 2010 Steve Traylen <steve.traylen at cern.ch> - 2.3.10-1
-- New upstream 2.3.10
+* Thu Jul 1 2010 Steve Traylen <steve.traylen at cern.ch> - 2.4.8-2
+- Set torquehome to /var/lib/torque rather than /var/torque
+- Drop provides and obsoletes since never present in Fedora/EPEL.
+- Don't use a variable for the description.
+- Split install of init.d scripts to build and install sections
+ as appropriate.
+- Mark docs subpackage as noarch.
+- Rename libtorque package to more normal torque-libs package.
+- Rename libtorque-devel package to more normal torque-devel package.
+- Remove the unused epoch and snapshot variables.
+- Have mom requires openssh-clients and server openssh-server
+- Have mom, sched and server log to /var/log/torque and symlinks
+- Move configurtion files to /etc/torque and symlink in expected.
+- Be more explicit about man page in the files section.
+- Rename README-localhost to README.Fedora to make it more obvious
+ it's related to this package.
+
+* Wed Jun 2 2010 Tom "spot" Callaway <tcallawa at redhat.com> - 2.4.8-1
+- update to 2.4.8
+- drop static libs
+- cleanup spec file
-* Tue Jan 19 2010 Steve Traylen <steve.traylen at cern.ch> - 2.3.9-1
-- New upstream 2.3.9
-* Thu Dec 3 2009 Steve Traylen <steve.traylen at cern.ch> - 2.3.8-1
-- Updated to upstream 2.3.8
-- First EPEL build.
-- Add new commands to package.
- /usr/bin/pbs_track
- /usr/bin/printserverdb
- /usr/sbin/qnoded
- /usr/sbin/qschedd
- /usr/sbin/qserverd
-- Remove torque-2.1.10-NI_MAXSERV.patch as not needed any more.
* Sun Jul 26 2009 Fedora Release Engineering <rel-eng at lists.fedoraproject.org> - 2.1.10-8
- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
--- README-localhost DELETED ---
- Previous message: rpms/kdebindings/devel kdebindings-4.4.92-sip4103.patch, NONE, 1.1 kdebindings.spec, 1.330, 1.331
- Next message: rpms/torque/devel README.Fedora, NONE, 1.1 config, NONE, 1.1 torque.spec, 1.35, 1.36 README-localhost, 1.1, NONE
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the scm-commits
mailing list