[permlib] New upstream release. Update Doxyfile.
Jerry James
jjames at fedoraproject.org
Wed Sep 26 19:56:12 UTC 2012
commit c421d855eac5fad4c6795353c837dce3ae4589cc
Author: Jerry James <jamesjer at betterlinux.com>
Date: Wed Sep 26 13:55:57 2012 -0600
New upstream release.
Update Doxyfile.
.gitignore | 2 +-
permlib-Doxyfile | 64 +++++++++++++++++++++++++++++++++--------------------
permlib.spec | 8 +++++-
sources | 2 +-
4 files changed, 48 insertions(+), 28 deletions(-)
---
diff --git a/.gitignore b/.gitignore
index 27b259c..650762a 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1 +1 @@
-/permlib-0.2.6.tar.gz
+/permlib-0.2.7.tar.gz
diff --git a/permlib-Doxyfile b/permlib-Doxyfile
index 5720465..6912d57 100644
--- a/permlib-Doxyfile
+++ b/permlib-Doxyfile
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1.1
+# Doxyfile 1.8.2
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -126,7 +126,9 @@ FULL_PATH_NAMES = YES
# only done if one of the specified strings matches the left-hand part of
# the path. The tag can be used to show relative paths in the file list.
# If left blank the directory from which doxygen is run is used as the
-# path to strip.
+# path to strip. Note that you specify absolute paths here, but also
+# relative paths, which will be relative from the directory where doxygen is
+# started.
STRIP_FROM_PATH =
@@ -229,14 +231,15 @@ OPTIMIZE_FOR_FORTRAN = NO
OPTIMIZE_OUTPUT_VHDL = NO
# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given extension.
-# Doxygen has a built-in mapping, but you can override or extend it using this
-# tag. The format is ext=language, where ext is a file extension, and language
-# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
-# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
-# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
-# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
-# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension,
+# and language is one of the parsers supported by doxygen: IDL, Java,
+# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C,
+# C++. For instance to make doxygen treat .inc files as Fortran files (default
+# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note
+# that for custom extensions you also need to set FILE_PATTERNS otherwise the
+# files are not read by doxygen.
EXTENSION_MAPPING =
@@ -249,6 +252,13 @@ EXTENSION_MAPPING =
MARKDOWN_SUPPORT = YES
+# When enabled doxygen tries to link words that correspond to documented classes,
+# or namespaces to their corresponding documentation. Such a link can be
+# prevented in individual cases by by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+
+AUTOLINK_SUPPORT = YES
+
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
# to include (a tag file for) the STL sources as input, then you should
# set this tag to YES in order to let doxygen match functions declarations and
@@ -269,12 +279,7 @@ CPP_CLI_SUPPORT = NO
SIP_SUPPORT = NO
-# For Microsoft's IDL there are propget and propput attributes to indicate getter
-# and setter methods for a property. Setting this option to YES (the default)
-# will make doxygen replace the get and set methods by a property in the
-# documentation. This will only work if the methods are indeed getting or
-# setting a simple type. If this is not the case, or you want to show the
-# methods anyway, you should set this option to NO.
+# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO.
IDL_PROPERTY_SUPPORT = YES
@@ -362,7 +367,8 @@ EXTRACT_ALL = NO
EXTRACT_PRIVATE = NO
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
+# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
+# scope will be included in the documentation.
EXTRACT_PACKAGE = NO
@@ -894,13 +900,23 @@ HTML_FOOTER =
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# style sheet in the HTML output directory as well, or it will be erased!
+# fine-tune the look of the HTML output. If left blank doxygen will
+# generate a default style sheet. Note that it is recommended to use
+# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this
+# tag will in the future become obsolete.
HTML_STYLESHEET =
+# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional
+# user-defined cascading style sheet that is included after the standard
+# style sheets created by doxygen. Using this option one can overrule
+# certain style aspects. This is preferred over using HTML_STYLESHEET
+# since it does not replace the standard style sheet and is therefor more
+# robust against future updates. Doxygen will copy the style sheet file to
+# the output directory.
+
+HTML_EXTRA_STYLESHEET =
+
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the HTML output directory. Note
# that these files will be copied to the base HTML output directory. Use the
@@ -985,9 +1001,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs"
DOCSET_BUNDLE_ID = org.doxygen.Project
-# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
+# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely
+# identify the documentation publisher. This should be a reverse domain-name
+# style string, e.g. com.mycompany.MyDocSet.documentation.
DOCSET_PUBLISHER_ID = org.doxygen.Publisher
diff --git a/permlib.spec b/permlib.spec
index 12b3032..287accf 100644
--- a/permlib.spec
+++ b/permlib.spec
@@ -1,6 +1,6 @@
Name: permlib
-Version: 0.2.6
-Release: 4%{?dist}
+Version: 0.2.7
+Release: 1%{?dist}
Summary: Library for permutation computations
License: BSD
@@ -68,6 +68,10 @@ ctest
%{_includedir}/permlib
%changelog
+* Wed Sep 26 2012 Jerry James <loganjerry at gmail.com> - 0.2.7-1
+- New upstream release
+- Update Doxyfile
+
* Mon Aug 6 2012 Jerry James <loganjerry at gmail.com> - 0.2.6-4
- Rebuild for boost 1.50
- Update Doxyfile
diff --git a/sources b/sources
index 52a9e5d..83f82be 100644
--- a/sources
+++ b/sources
@@ -1 +1 @@
-5d9018573233d53176edb4ed6d2d7f5f permlib-0.2.6.tar.gz
+24b8c131c5695d3bd6ee794eed3e3559 permlib-0.2.7.tar.gz
More information about the scm-commits
mailing list