Linux version 2.6.23-0.224.rc9.git6.fc8 (kojibuilder@) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-31)) #1 SMP Mon Oct 8 15:32:01 EDT 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
 BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   262128
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   262128
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000FA8D0, 0014 (r0 AMI   )
ACPI: RSDT 3FFF0000, 0028 (r1 AMIINT                10 MSFT       97)
ACPI: FACP 3FFF0030, 0074 (r1 AMIINT                10 MSFT       97)
ACPI: DSDT 3FFF00B0, 2AE4 (r1    VIA   VT8371     1000 MSFT  100000B)
ACPI: FACS 3FFF8000, 0040
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 50000000 (gap: 40000000:bfff0000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ec000
swsusp: Registered nosave memory region: 00000000000ec000 - 0000000000100000
Built 1 zonelists in Zone order.  Total pages: 258545
Kernel command line: ro root=LABEL=/1 console=ttyS0,9600n8
Local APIC disabled by BIOS -- you can enable it with "lapic"
Enabling fast FPU save and restore... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0814000 soft=c07f4000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 952.208 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:    8
... MAX_LOCK_DEPTH:          30
... MAX_LOCKDEP_KEYS:        2048
... CLASSHASH_SIZE:           1024
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 1024 kB
 per task-struct memory footprint: 1680 bytes
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1022396k/1048512k available (2271k kernel code, 25372k reserved, 1175k data, 568k init, 131008k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0763000 - 0xc07f1000   ( 568 kB)
      .data : 0xc0637db7 - 0xc075da44   (1175 kB)
      .text : 0xc0400000 - 0xc0637db7   (2271 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1907.59 BogoMIPS (lpj=953798)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0800 (from 0e00)
CPU0: AMD Athlon(tm) Processor stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
khelper used greatest stack depth: 3160 bytes left
Booting paravirtualized kernel on bare hardware
Time: 16:55:56  Date: 09/10/107
NET: Registered protocol family 16
khelper used greatest stack depth: 3084 bytes left
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
PCI quirk: region 0800-08ff claimed by vt82c586 ACPI
PCI quirk: region 0c00-0c7f claimed by vt82c686 HW-mon
PCI quirk: region 0400-040f claimed by vt82c686 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
  IO window: 8000-8fff
  MEM window: dde00000-dfefffff
  PREFETCH window: cdc00000-ddcfffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 2923k freed
khelper used greatest stack depth: 2956 bytes left
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1192035353.145:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
ksign: Installing public key data
Loading keyring
- Added public key 4FA50D9275099347
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
PCI: Disabling Via external APIC routing
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Thermal Zone [THRM] (30 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 631 not supported
Using IPI No-Shortcut mode
  Magic number: 11:363:944
  hash matches device tty1
Freeing unused kernel memory: 568k freed
Write protecting the kernel read-only data: 877k
Red Hat nash version 6.0.19 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loinsmod used greatest stack depth: 2696 bytes left
ading ehci-hcd.ko module
Loading ohci-hcd.ko module
Loading uhUSB Universal Host Controller Interface driver v3.0
ci-hcd.ko moduleACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9

ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 9, io base 0x0000b800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 9, io base 0x0000bc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
insmod used greatest stack depth: 1892 bytes left
Loading mbcache.ko module
Loading jbd.ko minput: ImPS/2 Generic Wheel Mouse as /class/input/input2
odule
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Loading libata.ko module
Loading ata_generic.ko module
Loading pata_via.ko module
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/66 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/66 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
ata1.00: ATA-5: IC35L060AVER07-0, ER6OA41A, max UDMA/100
ata1.00: 120103200 sectors, multi 16: LBA 
ata1.01: ATA-7: Maxtor 6Y250P0, YAR41BW0, max UDMA/133
ata1.01: 490234752 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/66
ata1.01: configured for UDMA/66
ata2.00: ATAPI: PIONEER DVD-RW  DVR-106D, 1.05, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      IC35L060AVER07-0 ER6O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6Y250P0   YAR4 PQ: 0 ANSI: 5
sd 0:0:1:0: [sdb] 490234752 512-byte hardware sectors (251000 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] 490234752 512-byte hardware sectors (251000 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 0:0:1:0: [sdb] Attached SCSI disk
scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-106D 1.05 PQ: 0 ANSI: 5
insmod used greatest stack depth: 820 bytes left
Waiting for driver initialization.
Trying to resume from LABEL=SWAP-sda2
No suspend signature on swap, not resuming.
Creating root device.
Mounting root filesystem.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
SELinux:  Disabled at runtime.
audit(1192035364.767:2): selinux=0 auid=4294967295
INIT: version 2.86 booting
		Welcome to Fedora 
		Press 'I' to enter interactive startup.
Setting clock  (localtime): Wed Oct 10 16:56:14 PDT 2007 [  OK  ]
Starting udev: [  OK  ]
Loading default keymap (us): [  OK  ]
Setting hostname garnet.leviatron.com:  [  OK  ]
No devices found
Setting up Logical Volume Management:   No volume groups found
[  OK  ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda3 
/1: clean, 275131/14731200 files, 2243939/14725580 blocks
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 
/boot: recovering journal
/boot: clean, 50/26104 files, 42152/104388 blocks
[  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
Mounting local filesystems:  [  OK  ]
Enabling local filesystem quotas:  [  OK  ]
Enabling /etc/fstab swaps:  [  OK  ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Checking for hardware changes [  OK  ]
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:  
Determining IP information for eth0...------------[ cut here ]------------
kernel BUG at include/linux/netdevice.h:1008!
invalid opcode: 0000 [#1] SMP 
Modules linked in: ipv6 dm_mirror dm_multipath dm_mod floppy snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_via82xx_modem snd_via82xx snd_seq_midi_emul gameport snd_seq_dummy snd_emu10k1 snd_ac97_codec ac97_bus snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_pcm via686a hwmon snd_mpu401_uart i2c_viapro snd_util_mem snd_rawmidi snd_seq_device e100 snd_hwdep snd_timer button mii i2c_core snd soundcore parport_pc snd_page_alloc parport sg sr_mod cdrom pata_via ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd
CPU:    0
EIP:    0060:[<f893dca8>]    Not tainted VLI
EFLAGS: 00210046   (2.6.23-0.224.rc9.git6.fc8 #1)
EIP is at e100_poll+0x24e/0x2ba [e100]
eax: 00000056   ebx: 00200246   ecx: 00000203   edx: f7b52000
esi: f7b52600   edi: 00000000   ebp: c07f4fc0   esp: c07f4f84
ds: 007b   es: 007b   fs: 00d8  gs: 0033  ss: 0068
Process ip (pid: 1506, ti=c07f4000 task=f6c86000 task.ti=f6c79000)
Stack: c07f4f9c c0449490 00000001 f6c86000 c07f4fd0 f7b52000 00000010 00000000 
       00000000 00000046 f6c60000 00c86000 f7b52000 00000000 c1e588b0 c07f4fe0 
       c05d056b c1e58880 fffbf66e 0000012c 00000001 c0751b18 0000000a c07f4ff8 
Call Trace:
 [<c0406463>] show_trace_log_lvl+0x1a/0x2f
 [<c0406513>] show_stack_log_lvl+0x9b/0xa3
 [<c04066d3>] show_registers+0x1b8/0x289
 [<c04068af>] die+0x10b/0x23e
 [<c0634c40>] do_trap+0x8a/0xa3
 [<c0406ca1>] do_invalid_op+0x88/0x92
 [<c0634a0a>] error_code+0x72/0x78
 [<c05d056b>] net_rx_action+0xa4/0x1bc
 [<c0432a39>] __do_softirq+0x78/0xff
 [<c04075d4>] do_softirq+0x74/0xf7
 =======================
Code: 42 2c a8 02 75 73 9c 58 8d 04 05 00 00 00 00 90 89 c3 fa 8d 04 05 00 00 00 00 90 90 e8 e0 9a b0 c7 8b 55 d8 8b 42 2c a8 20 75 04 <0f> 0b eb fe 8b 45 d8 05 80 01 00 00 e8 bb 6e bc c7 8b 45 d8 90 
EIP: [<f893dca8>] e100_poll+0x24e/0x2ba [e100] SS:ESP 0068:c07f4f84
Kernel panic - not syncing: Fatal exception in interrupt
