Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.5-117.fc10.i586 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Tue Nov 18 11:43:59 EST 2008
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffae000 (usable)
 BIOS-e820: 000000003ffae000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
last_pfn = 0x3ffae max_arch_pfn = 0x100000
kernel direct mapping tables up to 38000000 @ 7000-c000
Using x86 segment limits to approximate NX protection
RAMDISK: 3ef30000 - 3ff8d6d6
Allocated new RAMDISK: 00975000 - 019d26d6
Move RAMDISK from 000000003ef30000 - 000000003ff8d6d5 to 00975000 - 019d26d5
DMI 2.3 present.
ACPI: RSDP 000FDF00, 0014 (r0 DELL  )
ACPI: RSDT 3FFF0000, 002C (r1 DELL    CPi R   27D3091E ASL        61)
ACPI: FACP 3FFF0400, 0074 (r1 DELL    CPi R   27D3091E ASL        61)
ACPI: DSDT 3FFF0C00, 2CF6 (r1 INT430 SYSFexxx     1001 MSFT  100000E)
ACPI: FACS 3FFFF800, 0040
ACPI: BOOT 3FFF07C0, 0028 (r1 DELL    CPi R   27D3091E ASL        61)
127MB HIGHMEM available.
896MB LOWMEM available.
  mapped low ram: 0 - 38000000
  low ram: 00000000 - 38000000
  bootmap 00008000 - 0000f000
(9 early reservations) ==> bootmem [0000000000 - 0038000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 000097016c]    TEXT DATA BSS ==> [0000400000 - 000097016c]
  #4 [0000971000 - 0000975000]    INIT_PG_TABLE ==> [0000971000 - 0000975000]
  #5 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #7 [0000975000 - 00019d26d6]      NEW RAMDISK ==> [0000975000 - 00019d26d6]
  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x00038000
  HighMem  0x00038000 -> 0x0003ffae
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0003ffae
On node 0 totalpages: 261965
free_area_init_node: node 0, pgdat c07f1900, node_mem_map c19d3000
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 32430 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (021d7000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:beda0000)
PERCPU: Allocating 41372 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259917
Kernel command line: initrd=initrd.img rescue BOOT_IMAGE=vmlinuz 
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c089d000 soft=c087d000
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 1295.788 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1016056k/1048248k available (2730k kernel code, 31492k reserved, 1418k data, 412k init, 130744k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0813000 - 0xc087a000   ( 412 kB)
      .data : 0xc06aab0e - 0xc080d610   (1418 kB)
      .text : 0xc0400000 - 0xc06aab0e   (2730 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 2591.57 BogoMIPS (lpj=1295788)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20080609
ACPI: setting ELCR to 0200 (from 0800)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (2591.57 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3264 bytes
CPU0 attaching sched-domain:
 domain 0: span 0 level CPU
  groups: 0
net_namespace: 840 bytes
Booting paravirtualized kernel on bare hardware
Time: 20:02:26  Date: 09/11/09
NET: Registered protocol family 16
ACPI: ACPI Dock Station Driver
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc97e, last bus=2
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e7ffffff]
PCI: 0000:00:1d.0 reg 20 io port: [bf80, bf9f]
PCI: 0000:00:1d.1 reg 20 io port: [bf40, bf5f]
PCI: 0000:00:1d.2 reg 20 io port: [bf20, bf3f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [f4fffc00, f4ffffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [1f0, 1f7]
PCI: 0000:00:1f.1 reg 14 io port: [3f4, 3f7]
PCI: 0000:00:1f.1 reg 18 io port: [170, 177]
PCI: 0000:00:1f.1 reg 1c io port: [374, 377]
PCI: 0000:00:1f.1 reg 20 io port: [bfa0, bfaf]
PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
PCI: 0000:00:1f.5 reg 10 io port: [b800, b8ff]
PCI: 0000:00:1f.5 reg 14 io port: [bc40, bc7f]
PCI: 0000:00:1f.5 reg 18 32bit mmio: [f4fff800, f4fff9ff]
PCI: 0000:00:1f.5 reg 1c 32bit mmio: [f4fff400, f4fff4ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
PCI: 0000:00:1f.6 reg 10 io port: [b400, b4ff]
PCI: 0000:00:1f.6 reg 14 io port: [b080, b0ff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: PME# disabled
PCI: 0000:01:00.0 reg 10 32bit mmio: [fc000000, fcffffff]
PCI: 0000:01:00.0 reg 14 32bit mmio: [d0000000, dfffffff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [80000000, 8001ffff]
PCI: bridge 0000:00:01.0 io port: [c000, cfff]
PCI: bridge 0000:00:01.0 32bit mmio: [fc000000, fdffffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [d0000000, dfffffff]
PCI: 0000:02:00.0 reg 10 32bit mmio: [faffe000, faffffff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: 0000:02:01.0 reg 10 32bit mmio: [0, fff]
pci 0000:02:01.0: supports D1
pci 0000:02:01.0: supports D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
PCI: 0000:02:01.1 reg 10 32bit mmio: [faffd800, faffdfff]
PCI: 0000:02:01.1 reg 14 32bit mmio: [faff8000, faffbfff]
pci 0000:02:01.1: supports D1
pci 0000:02:01.1: supports D2
pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot
pci 0000:02:01.1: PME# disabled
PCI: 0000:02:03.0 reg 10 32bit mmio: [faffc000, faffcfff]
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 io port: [d000, efff]
PCI: bridge 0000:00:1e.0 32bit mmio: [f6000000, fbffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:03: io resource (0x810-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp 00:03: io resource (0x860-0x87f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
tracer: 772 pages allocated for 65536 entries of 48 bytes
   actual entries 65620
system 00:00: iomem range 0x0-0x9fbff could not be reserved
system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xcffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved
system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0xf400-0xf4fe has been reserved
system 00:03: ioport range 0x880-0x8bf has been reserved
system 00:03: ioport range 0x8c0-0x8df has been reserved
system 00:03: ioport range 0x8e0-0x8ff has been reserved
system 00:08: ioport range 0x900-0x97f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xc000-0xcfff
pci 0000:00:01.0:   MEM window: 0xfc000000-0xfdffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:01.0:   IO window: 0x00d000-0x00d0ff
pci 0000:02:01.0:   IO window: 0x00d400-0x00d4ff
pci 0000:02:01.0:   PREFETCH window: 0x50000000-0x53ffffff
pci 0000:02:01.0:   MEM window: 0x58000000-0x5bffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: 0xd000-0xefff
pci 0000:00:1e.0:   MEM window: 0xf6000000-0xfbffffff
pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x00000053ffffff
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:01.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [c000, cfff]
bus: 01 index 1 mmio: [fc000000, fdffffff]
bus: 01 index 2 mmio: [d0000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [d000, efff]
bus: 02 index 1 mmio: [f6000000, fbffffff]
bus: 02 index 2 mmio: [50000000, 53ffffff]
bus: 02 index 3 io port: [0, ffff]
bus: 02 index 4 mmio: [0, ffffffffffffffff]
bus: 03 index 0 io port: [d000, d0ff]
bus: 03 index 1 io port: [d400, d4ff]
bus: 03 index 2 mmio: [50000000, 53ffffff]
bus: 03 index 3 mmio: [58000000, 5bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
 it is
Freeing initrd memory: 16757k freed
Simple Boot Flag at 0x79 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1252699348.031:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1762
SELinux:  Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
decode_hpp: Could not get hotplug parameters. Use defaults
acpiphp: Slot [1] registered
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button (CM) [SBTN]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (60 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 855PM Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
serial 0000:00:1f.6: PCI INT B disabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input3
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
ata1.00: ATA-6: TOSHIBA MK8026GAX, PA001G, max UDMA/100
ata1.00: 156301488 sectors, multi 8: LBA 
ata1.00: configured for UDMA/100
ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4241N, A100, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK8026GA PA00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4241N A100 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.5-117.fc10.i586 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.5-117.fc10.i586 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.5-117.fc10.i586 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.5-117.fc10.i586 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
Marking TSC unstable due to TSC halts in idle
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=045e, idProduct=0040
usb 3-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 3-1: Manufacturer: Microsoft
usbcore: registered new interface driver hiddev
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5
input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
  Magic number: 9:926:42
bdi 7:7: hash matches
Freeing unused kernel memory: 412k freed
Write protecting the kernel text: 2732k
Write protecting the kernel read-only data: 1172k
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
floppy0: no floppy controllers found
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
input: PC Speaker as /devices/platform/pcspkr/input/input8
squashfs: version 3.4 (2008/08/26) Phillip Lougher
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
No iBFT detected.
video: Unknown symbol video_output_register
video: Unknown symbol video_output_unregister
Yenta: CardBus bridge found at 0000:02:01.0 [1028:016a]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:01.0, mfunc 0x012c1202, devctl 0x64
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
Yenta: ISA IRQ mask 0x04d8, PCI irq 11
Socket status: 30000086
Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
cs: IO port probe 0xd000-0xefff: clean.
pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
b44 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
firewire_ohci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0d:56:ac:dd:dc
firewire_ohci: Added fw-ohci device 0000:02:01.1, OHCI version 1.10
ipw2100 0000:02:03.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
firmware: requesting ipw2100-1.3.fw
firewire_core: created device fw0: GUID 424fc0001e876c61, S400
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset utf8
Unable to load NLS charset utf8
ISO 9660 Extensions: RRIP_1991A
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
ISOFS: Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev loop0.
SELinux: 8192 avtab hash slots, 109076 rules.
SELinux: 8192 avtab hash slots, 109076 rules.
SELinux:  8 users, 11 roles, 2503 types, 119 bools, 1 sens, 1024 cats
SELinux:  73 classes, 109076 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev loop0, type squashfs), not configured for labeling
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1252699423.923:2): policy loaded auid=4294967295 ses=4294967295
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  3352.000 MB/sec
xor: using function: pIII_sse (3352.000 MB/sec)
async_tx: api initialized (async)
raid6: int32x1    417 MB/s
raid6: int32x2    484 MB/s
raid6: int32x4    363 MB/s
raid6: int32x8    343 MB/s
raid6: mmxx1     1230 MB/s
raid6: mmxx2     1398 MB/s
raid6: sse1x1     968 MB/s
raid6: sse1x2    1527 MB/s
raid6: sse2x1    1667 MB/s
raid6: sse2x2    1890 MB/s
raid6: using algorithm sse2x2 (1890 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
md: linear personality registered for level -1
GFS2 (built Nov 18 2008 11:45:29) installed
JFS: nTxBlock = 8074, nTxLock = 64597
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EXT4-fs: barriers enabled
kjournald2 starting.  Commit interval 5 seconds
EXT4 FS on sda3, internal journal on sda3:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext4), uses xattr
EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
EXT4-fs: mballoc: 0 generated and it took 0
EXT4-fs: mballoc: 0 preallocated, 0 discarded
EXT4-fs: barriers enabled
kjournald2 starting.  Commit interval 5 seconds
EXT4 FS on sda5, internal journal on sda5:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda5, type ext4), uses xattr
EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
EXT4-fs: mballoc: 0 generated and it took 0
EXT4-fs: mballoc: 0 preallocated, 0 discarded
EXT4-fs: barriers enabled
kjournald2 starting.  Commit interval 5 seconds
EXT4 FS on sda3, internal journal on sda3:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext4), uses xattr
EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
EXT4-fs: mballoc: 0 generated and it took 0
EXT4-fs: mballoc: 0 preallocated, 0 discarded
EXT4-fs: barriers enabled
kjournald2 starting.  Commit interval 5 seconds
EXT4 FS on sda3, internal journal on sda3:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext4), uses xattr
EXT4-fs: barriers enabled
kjournald2 starting.  Commit interval 5 seconds
EXT4 FS on sda5, internal journal on sda5:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda5, type ext4), uses xattr
Adding 1028120k swap on /dev/sda6.  Priority:-1 extents:1 across:1028120k