Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31-40.fc12.x86_64 (mockbuild@x86-6.fedora.phx.redhat.com) (gcc version 4.4.1 20090918 (Red Hat 4.4.1-15) (GCC) ) #1 SMP Wed Sep 23 17:38:14 EDT 2009
Command line: ro root=UUID=d913938a-974b-4515-9519-8e7fdf6fa8bd SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us 3
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bbfd0000 (usable)
 BIOS-e820: 00000000bbfd0000 - 00000000bbfde000 (ACPI data)
 BIOS-e820: 00000000bbfde000 - 00000000bc000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0xbbfd0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0080000000 mask FFE0000000 write-back
  2 base 00A0000000 mask FFF0000000 write-back
  3 base 00B0000000 mask FFF8000000 write-back
  4 base 00B8000000 mask FFFC000000 write-back
  5 base 00000DC000 mask 0FFFFFE000 write-back
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
------------[ cut here ]------------
WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:456 generic_get_mtrr+0xdf/0x131() (Not tainted)
Hardware name: MS-7252
mtrr: your BIOS has set up an incorrect mask, fixing it up.
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.31-40.fc12.x86_64 #1
Call Trace:
 [<ffffffff810642ec>] warn_slowpath_common+0x95/0xc3
 [<ffffffff810643a7>] warn_slowpath_fmt+0x50/0x66
 [<ffffffff81094621>] ? lock_release_holdtime+0x3f/0x146
 [<ffffffff81026761>] generic_get_mtrr+0xdf/0x131
 [<ffffffff81a009aa>] mtrr_cleanup+0xa1/0x413
 [<ffffffff819fefb8>] mtrr_bp_init+0x1b8/0x1f1
 [<ffffffff819fcf59>] ? e820_end_pfn.clone.0+0x90/0xae
 [<ffffffff819fa951>] setup_arch+0x465/0xa26
 [<ffffffff8150344d>] ? printk+0x50/0x6b
 [<ffffffff819f5405>] start_kernel+0xf3/0x44c
 [<ffffffff819f4970>] x86_64_start_reservations+0xbb/0xd6
 [<ffffffff819f4a90>] x86_64_start_kernel+0x105/0x128
---[ end trace a7919e7f17c0a725 ]---
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bbfd0000
 0000000000 - 00bbe00000 page 2M
 00bbe00000 - 00bbfd0000 page 4k
kernel direct mapping tables up to bbfd0000 @ 8000-d000
RAMDISK: 37489000 - 37fef98f
ACPI: RSDP 00000000000f8fa0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bbfd0000 00034 (v01 A M I  OEMRSDT  09000706 MSFT 00000097)
ACPI: FACP 00000000bbfd0200 00084 (v02 A M I  OEMFACP  09000706 MSFT 00000097)
ACPI: DSDT 00000000bbfd0440 048F3 (v01  1ADIF 1ADIF006 00000006 INTL 20051117)
ACPI: FACS 00000000bbfde000 00040
ACPI: APIC 00000000bbfd0390 00070 (v01 A M I  OEMAPIC  09000706 MSFT 00000097)
ACPI: MCFG 00000000bbfd0400 0003C (v01 A M I  OEMMCFG  09000706 MSFT 00000097)
ACPI: OEMB 00000000bbfde040 00060 (v01 A M I  AMI_OEM  09000706 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-00000000bbfd0000
Bootmem setup node 0 0000000000000000-00000000bbfd0000
  NODE_DATA [000000000000b000 - 0000000000022fff]
  bootmap [0000000000023000 -  000000000003a7ff] pages 18
(7 early reservations) ==> bootmem [0000000000 - 00bbfd0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0002662390]    TEXT DATA BSS ==> [0001000000 - 0002662390]
  #3 [0037489000 - 0037fef98f]          RAMDISK ==> [0037489000 - 0037fef98f]
  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #5 [0002663000 - 0002663174]              BRK ==> [0002663000 - 0002663174]
  #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
found SMP MP-table at [ffff8800000ff780] ff780
 [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880002c00000-ffff8800079fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x000bbfd0
On node 0 totalpages: 769903
  DMA zone: 104 pages used for memmap
  DMA zone: 102 pages reserved
  DMA zone: 3793 pages, LIFO batch:0
  DMA32 zone: 19447 pages used for memmap
  DMA32 zone: 746457 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at bc000000 (gap: bc000000:42c00000)
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 478 pages at ffff880007a00000, static data 1926816 bytes
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 750250
Policy zone: DMA32
Kernel command line: ro root=UUID=d913938a-974b-4515-9519-8e7fdf6fa8bd SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us 3
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Node 0: aperture @ 8de0000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 2960788k/3080000k available (5176k kernel code, 388k absent, 118824k reserved, 3132k data, 3196k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:424
Fast TSC calibration using PIT
Detected 2008.797 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
 memory used by lock dependency info: 6207 kB
 per task-struct memory footprint: 2688 bytes
allocated 31457280 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
ODEBUG: 10 of 10 active objects replaced
Calibrating delay loop (skipped), value calculated using timer frequency.. 4017.59 BogoMIPS (lpj=2008797)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0x0 -> Node 0
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Counters: AMD PMU driver.
... version:                 0
... bit width:               48
... generic counters:        4
... value mask:              0000ffffffffffff
... max period:              00007fffffffffff
... fixed-purpose counters:  0
... counter mask:            000000000000000f
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21032 entries in 83 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... failed.
...trying to set up timer as Virtual Wire IRQ...
..... failed.
...trying to set up timer as ExtINT IRQ...
..... works.
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
lockdep: fixing up alternatives.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4005.52 BogoMIPS (lpj=2002760)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 5 MCE banks
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Brought up 2 CPUs
Total of 2 processors activated (8023.11 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=104 bytes
sizeof(inode)=1168 bytes
sizeof(dentry)=256 bytes
sizeof(ext3inode)=1584 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=248 bytes
sizeof(task_struct)=9304 bytes
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 12:36:22  Date: 09/25/09
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, fe0bffff]
bus: [00,ff] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [c0000000, fcffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - 1F, should be 1E 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:00:05.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:05.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
pci 0000:00:05.0: reg 30 32bit mmio: [0xfebe0000-0xfebfffff]
pci 0000:00:0a.1: reg 20 io port: [0x5000-0x503f]
pci 0000:00:0a.1: reg 24 io port: [0x6000-0x603f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
pci 0000:00:0b.0: reg 10 32bit mmio: [0xfebde000-0xfebdefff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: reg 10 32bit mmio: [0xfebdfc00-0xfebdfcff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0d.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:0e.0: reg 10 io port: [0xe800-0xe807]
pci 0000:00:0e.0: reg 14 io port: [0xe480-0xe483]
pci 0000:00:0e.0: reg 18 io port: [0xe400-0xe407]
pci 0000:00:0e.0: reg 1c io port: [0xe080-0xe083]
pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f]
pci 0000:00:0e.0: reg 24 32bit mmio: [0xfebdd000-0xfebddfff]
pci 0000:00:10.1: reg 10 32bit mmio: [0xfebd8000-0xfebdbfff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:14.0: reg 10 32bit mmio: [0xfebdc000-0xfebdcfff]
pci 0000:00:14.0: reg 14 io port: [0xdc00-0xdc07]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:10.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 21) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 22) *11
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA0] (IRQs 22) *7
ACPI: PCI Interrupt Link [LSA1] (IRQs 23) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x80f has been reserved
system 00:07: ioport range 0x4000-0x407f has been reserved
system 00:07: ioport range 0x4080-0x40ff has been reserved
system 00:07: ioport range 0x4400-0x447f has been reserved
system 00:07: ioport range 0x4480-0x44ff has been reserved
system 00:07: ioport range 0x4800-0x487f has been reserved
system 00:07: ioport range 0x4880-0x48ff has been reserved
system 00:07: ioport range 0x2000-0x207f has been reserved
system 00:07: ioport range 0x2080-0x20ff has been reserved
system 00:07: iomem range 0xfeb80000-0xfebbffff has been reserved
system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: ioport range 0xa00-0xa0f has been reserved
system 00:0b: ioport range 0xa10-0xa1f has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved
system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
pci 0000:00:03.0:   IO window: disabled
pci 0000:00:03.0:   MEM window: disabled
Switched to high resolution mode on CPU 0
pci 0000:00:03.0:   PREFETCH window: disabled
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
Switched to high resolution mode on CPU 1
pci 0000:00:04.0:   IO window: disabled
pci 0000:00:04.0:   MEM window: disabled
pci 0000:00:04.0:   PREFETCH window: disabled
pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
pci 0000:00:10.0:   IO window: disabled
pci 0000:00:10.0:   MEM window: disabled
pci 0000:00:10.0:   PREFETCH window: disabled
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:10.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11674k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1253882182.304:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 5805
SELinux:  Registering netfilter hooks
cryptomgr_test used greatest stack depth: 5728 bytes left
cryptomgr_test used greatest stack depth: 5520 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:05.0: Boot video device
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
  alloc irq_desc for 24 on node 0
  alloc kstat_irqs on node 0
pcieport-driver 0000:00:03.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:03.0: setting latency timer to 64
  alloc irq_desc for 25 on node 0
  alloc kstat_irqs on node 0
pcieport-driver 0000:00:04.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:04.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
ACPI Warning: \_TZ_.THRM._TZD: Return Package type mismatch at index 0 - found Processor, expected Reference 20090521 nspredef-946
ACPI: Expecting a [Reference] package element, found type C
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (80 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
  alloc irq_desc for 23 on node 0
  alloc kstat_irqs on node 0
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
ehci_hcd 0000:00:0b.1: irq 23, io mem 0xfebdfc00
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-40.fc12.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
work_for_cpu used greatest stack depth: 3856 bytes left
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
  alloc irq_desc for 21 on node 0
  alloc kstat_irqs on node 0
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfebde000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-40.fc12.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
  Magic number: 9:749:633
rtc_cmos 00:02: setting system clock to 2009-09-25 12:36:23 UTC (1253882183)
Initalizing network drop monitor service
Freeing unused kernel memory: 3196k freed
NX-protecting the kernel data: ffffffff8150e000, 4469 pages
Write protecting the kernel read-only data: 7392k
dracut: dracut-002-7.gitb9c4654a.fc12
udev: starting version 145
------------[ cut here ]------------
WARNING: at kernel/trace/ftrace.c:1003 ftrace_bug+0x198/0x27e() (Tainted: G        W )
Hardware name: MS-7252
Modules linked in: i2c_core(+)
Pid: 85, comm: modprobe Tainted: G        W  2.6.31-40.fc12.x86_64 #1
Call Trace:
 [<ffffffff810642ec>] warn_slowpath_common+0x95/0xc3
 [<ffffffffa0003072>] ? i2c_new_dummy+0x8/0x5e [i2c_core]
 [<ffffffff81064341>] warn_slowpath_null+0x27/0x3d
 [<ffffffff810d4ace>] ftrace_bug+0x198/0x27e
 [<ffffffffa0003072>] ? i2c_new_dummy+0x8/0x5e [i2c_core]
 [<ffffffff810d5d26>] ftrace_convert_nops+0x201/0x2b9
 [<ffffffffa0003072>] ? i2c_new_dummy+0x8/0x5e [i2c_core]
 [<ffffffff810d5e2a>] ftrace_module_notify+0x4c/0x7f
 [<ffffffff81509c65>] notifier_call_chain+0x72/0xba
 [<ffffffff81086e71>] ? __blocking_notifier_call_chain+0x4c/0x8e
 [<ffffffff81086e88>] __blocking_notifier_call_chain+0x63/0x8e
 [<ffffffff81086eda>] blocking_notifier_call_chain+0x27/0x3d
 [<ffffffff810a472a>] sys_init_module+0xb7/0x249
 [<ffffffff81011f42>] system_call_fastpath+0x16/0x1b
---[ end trace a7919e7f17c0a727 ]---
ftrace faulted on writing [<ffffffffa0003072>] i2c_new_dummy+0x8/0x5e [i2c_core]
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19
  alloc irq_desc for 19 on node 0
  alloc kstat_irqs on node 0
nouveau 0000:00:05.0: PCI INT A -> Link[LNEC] -> GSI 19 (level, low) -> IRQ 19
nouveau 0000:00:05.0: setting latency timer to 64
nvidia-control: failed to evaluate _DSM: 5
nouveau 0000:00:05.0: Detected an NV40 generation card (0x04e000a2)
nouveau 0000:00:05.0: Attempting to load BIOS image from PROM
nouveau 0000:00:05.0: ... BIOS signature not found
nouveau 0000:00:05.0: Attempting to load BIOS image from PRAMIN
nouveau 0000:00:05.0: ... appears to be valid
nouveau 0000:00:05.0: BIT BIOS found
nouveau 0000:00:05.0: Bios version 05.51.28.45
nouveau 0000:00:05.0: TMDS table script pointers not stubbed
nouveau 0000:00:05.0: Found Display Configuration Block version 3.0
nouveau 0000:00:05.0: Raw DCB entry 0: 02000300 00000023
nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset 0xCF25
nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset 0xD07F
nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset 0xD080
nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset 0xD202
nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset 0xD24E
usb 2-1: new low speed USB device using ohci_hcd and address 2
[TTM] Zone  kernel: Available graphics memory: 1487830 kiB.
nouveau 0000:00:05.0: Allocating FIFO number 0
nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 0
nouveau 0000:00:05.0: Initial CRTC_OWNER is 0
nouveau 0000:00:05.0: Detected a VGA connector
nouveau 0000:00:05.0: Saving VGA fonts
usb 2-1: New USB device found, idVendor=045e, idProduct=00dd
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Comfort Curve Keyboard 2000
usb 2-1: Manufacturer: Microsoft
usb 2-1: configuration #1 chosen from 1 choice
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.0/input/input3
generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:0b.0-1/input0
allocated 1280x1024 fb: 0x49000, bo ffff8800b434d5a0
nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.1/input/input4
generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:0b.0-1/input1
nouveau 0000:00:05.0: Setting dpms mode 3 on CRTC 0
nouveau 0000:00:05.0: vpll: n 13 m 3 log2p 0
[drm] DAC-7: set mode 1280x1024 19
nouveau 0000:00:05.0: nv04_dac_mode_set called for encoder 0
nouveau 0000:00:05.0: Setting dpms mode 0 on CRTC 0
nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
nouveau 0000:00:05.0: Setting dpms mode 3 on CRTC 1
nouveau 0000:00:05.0: GPU lockup - switching to software fbcon
Console: switching to colour frame buffer device 160x64
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.15 20090420 for 0000:00:05.0 on minor 0
work_for_cpu used greatest stack depth: 3152 bytes left
dracut: Starting plymouth daemon
usb 2-2: new low speed USB device using ohci_hcd and address 3
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
  alloc irq_desc for 22 on node 0
  alloc kstat_irqs on node 0
sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe000 irq 22
ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 22
ata1: SATA link down (SStatus 0 SControl 300)
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi2 : pata_amd
scsi3 : pata_amd
usb 2-2: New USB device found, idVendor=0458, idProduct=0056
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: 4D Scroll Mouse
usb 2-2: Manufacturer: Genius
usb 2-2: configuration #1 chosen from 1 choice
input: Genius 4D Scroll Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input5
generic-usb 0003:0458:0056.0003: input,hidraw2: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:0b.0-2/input0
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: Hitachi HDS721616PLA380, P22OA70A, max UDMA/133
ata2.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDS72161 P22O PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5
ata3.00: ATA-7: WDC WD1600JB-00REA0, 20.00K20, max UDMA/100
 sda6 >
ata3.00: 312581808 sectors, multi 16: LBA48 
ata3: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:900:0x11)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600JB-00R 20.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 < sdb5 sdb6 > sdb3
sd 2:0:0:0: [sdb] Attached SCSI disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
dracut: Mounted root filesystem /dev/sda2
dracut: Loading SELinux policy
SELinux: 8192 avtab hash slots, 140102 rules.
SELinux: 8192 avtab hash slots, 140102 rules.
SELinux:  8 users, 12 roles, 2955 types, 129 bools, 1 sens, 1024 cats
SELinux:  75 classes, 140102 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1253882187.126:2): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
udev: starting version 145
EDAC MC: Ver: 2.1.0 Sep 23 2009
EDAC amd64_edac:  Ver: 3.2.0 Sep 23 2009
EDAC amd64: This node reports that Memory ECC is currently disabled.
EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
    Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
    Might be a BIOS bug, if BIOS says ECC is enabled
    Use of the override can cause unknown side effects.
amd64_edac: probe of 0000:00:18.2 failed with error -22
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
  alloc irq_desc for 20 on node 0
  alloc kstat_irqs on node 0
forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
forcedeth 0000:00:14.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 66:77:44:22:33:11
forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5000
i2c-adapter i2c-2: nForce2 SMBus adapter at 0x6000
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:10.1: setting latency timer to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3866:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3870:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3871:    mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3874:    dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:3882:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0
ALSA sound/pci/hda/hda_codec.c:3884:    dig-in=0x1f
ALSA sound/pci/hda/patch_realtek.c:1197: realtek: Enabling init ASM_ID=0xe603 CODEC_ID=10ec0883
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input6
ip used greatest stack depth: 3064 bytes left
device-mapper: multipath: version 1.1.0 loaded
EXT3 FS on sda2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb3, type ext3), uses xattr
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2048276k swap on /dev/sda3.  Priority:-1 extents:1 across:2048276k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bridge firewalling registered
virbr0: starting userspace STP failed, starting kernel STP
qemu-system-mip used greatest stack depth: 2824 bytes left
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
eth0: no IPv6 routers present