ch at code-heads.com
Mon Nov 28 20:54:35 UTC 2005
I am trying to get my scanner to work. Here is the output:
Ran this -> sane-find-scanner ->
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x03f0 [hp], product=0x3a11 [officejet 5500 series]) at libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
then ran this -> scanimage -L ->
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
The printer is working locally and it is also working as a network printer.
I tried to do a search but came up with nothing. I'm I missing something??
More information about the users