Problems around my notebook - I need some debugging around the kernel

[Zoltan Hoppar]

Thanks,

I knew this, but doesnt work. However I have insterted successfully the b43
driver, but somehow gets disabled my wireless network. I think this is
causing by NetworkManager, but couldn't tell that why. Maybe I don't have
right, but currently I'm stucked with an disabled Broadcom-PHY. Well, it
seems in dmesg that first turns on the PHY then turns off???

Here is my part of the dmesg:

sky2 0000:02:00.0: eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
b43 ssb0:0: firmware: requesting b43/ucode15.fw
b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw
b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw
b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control
both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger
bdl_pos_adj.
b43-phy0: Radio hardware status changed to DISABLED

Furthermore, on networkmanager gui where you could turn off/on the networks
(right click on upper systray icon), greyed out - so couldn't explain what
happened...

PS: If I would like to always load an module for my computer, where must I
note that for the system? (HP WMI driver module)

2010/9/4 Athmane Madjoudj <athmanem at gmail.com>

> On 09/04/2010 09:24 PM, Zoltan Hoppar wrote:
> > Hi Everyone,
> >
> > I have a little problems with my new laptop HP Probook 4515s with Fedora
> > 13, and the latest kernel.
> >
> > 1. Somehow, I couldn't activate the broadcom PHY - wifi module, I have
> > followed many advices - linuxwireless.org <http://linuxwireless.org> and
> > after many tries I have given up. In result I got only an broken network
> > manager.
>
> Try the following:
>
> 1. Enable RPMFusion repo (both free and non-free). [1]
> 2. as root:
>    # yum install kmod-wl broadcom-wl
>
> [1] http://rpmfusion.org/Configuration
>
> HTH
>
> [... SNIP ...]
>
>
> --
> Athmane Madjoudj
> --
> users mailing list
> users at lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>



-- 
PGP:  06853DF7
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.fedoraproject.org/pipermail/users/attachments/20100905/bc8f3332/attachment.html