SSH on Fedora 16

Fri Dec 23 16:07:00 UTC 2011

On 12/23/2011 04:14 PM, Tom Horsley wrote:
> On Fri, 23 Dec 2011 15:30:16 +0100
> suvayu ali wrote:
>
>> It would be helpful if you could give more details and say what
>> command you are trying and its output with the verbose flag set like
>> this -vvv.
> Yep, the -vvv option on the remote ssh and taking a look at /var/log/messages
> and /var/log/secure should provide details about why failure happens.
> Perhaps the sshd_config file is set to only allow public key connections?
> That would certainly make a password attempt fail (and is how I have my
> server setup for remote connections versus local network connections
> where I do allow passwords).
Hello

Here are the outputs:

Output from the remote machine:

daniel at saturn:~$ ssh -vvv daniel at 172.25.0.1
OpenSSH_5.5p1 Debian-6+squeeze1, OpenSSL 0.9.8o 01 Jun 2010
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to 172.25.0.1 [172.25.0.1] port 22.
debug1: Connection established.
debug1: identity file /home/daniel/.ssh/id_rsa type -1
debug1: identity file /home/daniel/.ssh/id_rsa-cert type -1
debug1: identity file /home/daniel/.ssh/id_dsa type -1
debug1: identity file /home/daniel/.ssh/id_dsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8
debug1: match: OpenSSH_5.8 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.5p1 Debian-6+squeeze1
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: 
diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: 
ssh-rsa-cert-v00 at openssh.com,ssh-dss-cert-v00 at openssh.com,ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: 
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc at lysator.liu.se
debug2: kex_parse_kexinit: 
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc at lysator.liu.se
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,umac-64 at openssh.com,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,umac-64 at openssh.com,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib at openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib at openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: 
diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: 
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc at lysator.liu.se
debug2: kex_parse_kexinit: 
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc at lysator.liu.se
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,umac-64 at openssh.com,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: 
hmac-md5,hmac-sha1,umac-64 at openssh.com,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib at openssh.com
debug2: kex_parse_kexinit: none,zlib at openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 120/256
debug2: bits set: 545/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: host 172.25.0.1 filename 
/home/daniel/.ssh/known_hosts
debug3: check_host_in_hostfile: host 172.25.0.1 filename 
/home/daniel/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 1
debug1: Host '172.25.0.1' is known and matches the RSA host key.
debug1: Found key in /home/daniel/.ssh/known_hosts:1
debug2: bits set: 524/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/daniel/.ssh/id_rsa ((nil))
debug2: key: /home/daniel/.ssh/id_dsa ((nil))
debug1: Authentications that can continue: 
publickey,gssapi-keyex,gssapi-with-mic,password
debug3: start over, passed a different list 
publickey,gssapi-keyex,gssapi-with-mic,password
debug3: preferred 
gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup gssapi-keyex
debug3: remaining preferred: 
gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_is_enabled gssapi-keyex
debug1: Next authentication method: gssapi-keyex
debug1: No valid Key exchange context
debug2: we did not send a packet, disable method
debug3: authmethod_lookup gssapi-with-mic
debug3: remaining preferred: publickey,keyboard-interactive,password
debug3: authmethod_is_enabled gssapi-with-mic
debug1: Next authentication method: gssapi-with-mic
debug1: An invalid name was supplied
Cannot determine realm for numeric host address

debug1: An invalid name was supplied
Cannot determine realm for numeric host address

debug1: An invalid name was supplied

debug2: we did not send a packet, disable method
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/daniel/.ssh/id_rsa
debug3: no such identity: /home/daniel/.ssh/id_rsa
debug1: Trying private key: /home/daniel/.ssh/id_dsa
debug3: no such identity: /home/daniel/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
daniel at 172.25.0.1's password:
debug3: packet_send2: adding 64 (len 57 padlen 7 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentications that can continue: 
publickey,gssapi-keyex,gssapi-with-mic,password
Permission denied, please try again.
daniel at 172.25.0.1's password:
debug3: packet_send2: adding 64 (len 57 padlen 7 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentications that can continue: 
publickey,gssapi-keyex,gssapi-with-mic,password
Permission denied, please try again.
daniel at 172.25.0.1's password:

[root at merkur ~]# cat /etc/ssh/sshd_config
#    $OpenBSD: sshd_config,v 1.82 2010/09/06 17:10:19 naddy Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.

Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

# The default requires explicit activation of protocol 1
Protocol 2

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key

# Lifetime and size of ephemeral version 1 server key
KeyRegenerationInterval 1h
ServerKeyBits 1024

# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO

# Authentication:

LoginGraceTime 30
PermitRootLogin no
StrictModes yes
#MaxAuthTries 6
#MaxSessions 10

#RSAAuthentication yes
PubkeyAuthentication yes
#AuthorizedKeysFile    .ssh/authorized_keys
#AuthorizedKeysCommand none
#AuthorizedKeysCommandRunAs nobody

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
RhostsRSAAuthentication no
# similar for protocol version 2
HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
PermitEmptyPasswords no

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
#KerberosUseKuserok yes

# GSSAPI options
#GSSAPIAuthentication no
GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no

# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
# WARNING: 'UsePAM no' is not supported in Fedora and may cause several
# problems.
#UsePAM no
#UsePAM yes

# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY 
LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
AcceptEnv XMODIFIERS

#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
#ChrootDirectory none

# no default banner path
#Banner none

# override default of no subsystems
Subsystem    sftp    /usr/libexec/openssh/sftp-server

# Uncomment this if you want to use .local domain
#Host *.local
#    CheckHostIP no

# Example of overriding settings on a per-user basis
#Match User anoncvs
#    X11Forwarding no
#    AllowTcpForwarding no
#    ForceCommand cvs server

/var/log/secure:
Dec 23 17:01:59 merkur sshd[9744]: error: Could not get shadow 
information for daniel
Dec 23 17:01:59 merkur sshd[9744]: Failed password for daniel from 
172.24.0.150 port 46323 ssh2
Dec 23 17:02:07 merkur sshd[9744]: Failed password for daniel from 
172.24.0.150 port 46323 ssh2

/var/log/messages:
Dec 23 16:58:31 merkur dbus[882]: [system] Activating service 
name='net.reactivated.Fprint' (using servicehelper)
Dec 23 16:58:31 merkur dbus-daemon[882]: dbus[882]: [system] Activating 
service name='net.reactivated.Fprint' (using servicehelper)
Dec 23 16:58:31 merkur dbus-daemon[882]: Launching FprintObject
Dec 23 16:58:31 merkur dbus-daemon[882]: dbus[882]: [system] 
Successfully activated service 'net.reactivated.Fprint'
Dec 23 16:58:31 merkur dbus[882]: [system] Successfully activated 
service 'net.reactivated.Fprint'
Dec 23 16:58:31 merkur dbus-daemon[882]: ** Message: D-Bus service 
launched with name: net.reactivated.Fprint
Dec 23 16:58:31 merkur dbus-daemon[882]: ** Message: entering main loop
Dec 23 16:59:01 merkur dbus-daemon[882]: ** Message: No devices in use, exit
Dec 23 17:01:01 merkur systemd-logind[874]: New session 21 of user root.
Dec 23 17:01:01 merkur systemd-logind[874]: Removed session 21.

daniel at saturn:~$ locale  (((REMOTE)))
LANG=de_CH.UTF-8
LANGUAGE=de_CH:de
LC_CTYPE="de_CH.UTF-8"
LC_NUMERIC="de_CH.UTF-8"
LC_TIME="de_CH.UTF-8"
LC_COLLATE="de_CH.UTF-8"
LC_MONETARY="de_CH.UTF-8"
LC_MESSAGES="de_CH.UTF-8"
LC_PAPER="de_CH.UTF-8"
LC_NAME="de_CH.UTF-8"
LC_ADDRESS="de_CH.UTF-8"
LC_TELEPHONE="de_CH.UTF-8"
LC_MEASUREMENT="de_CH.UTF-8"
LC_IDENTIFICATION="de_CH.UTF-8"
LC_ALL=

[root at merkur ~]# locale   (LOCAL MACHINE; FEDORA)
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=

Kind regards
Daniel