Sound input on Fedora 15
Mike Wright
mike.wright at mailinator.com
Wed Jun 1 22:45:37 UTC 2011
On 06/01/2011 03:17 PM, Michael Eager wrote:
> Sound output through my motherboard's Intel HDA ACL888 works OK.
> Sound input does not work.
>
> Alsa lists the ACL888 as well as a video capture card.
> Pulseaudio (pacmd list-sources) shows the card and says that it only has
> internal audio monitor, not hardware input.
>
> Any suggestions on how to fix this?
If I understand you correctly the Line Input doesn't make it through the
sound path.
pactl load-module module-loopback
SoundSettings->Input->Connector = Line-In
Now clicking on the speaker icon will show two volume sliders: Volume
and Microphone.
hth
>
> # arecord -l
> **** List of CAPTURE Hardware Devices ****
> card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 0: Intel [HDA Intel], device 2: ALC888 Analog [ALC888 Analog]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 1: Bt878 [Brooktree Bt878], device 0: Bt87x Digital [Bt87x Digital]
> Subdevices: 0/1
> Subdevice #0: subdevice #0
> card 1: Bt878 [Brooktree Bt878], device 1: Bt87x Analog [Bt87x Analog]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
>
>
> # pacmd
> list-sources
> 2 source(s) available.
> index: 0
> name:<alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
> driver:<module-alsa-card.c>
> flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
> state: RUNNING
> suspend cause:
> priority: 1950
> volume: 0: 100% 1: 100%
> 0: 0.00 dB 1: 0.00 dB
> balance 0.00
> base volume: 100%
> 0.00 dB
> volume steps: 65537
> muted: no
> current latency: 0.00 ms
> max rewind: 344 KiB
> sample spec: s16le 2ch 44100Hz
> channel map: front-left,front-right
> Stereo
> used by: 1
> linked by: 1
> configured latency: 20.00 ms; range is 0.50 .. 1999.82 ms
> monitor_of: 0
> card: 0<alsa_card.pci-0000_00_1b.0>
> module: 4
> properties:
> device.description = "Monitor of Internal Audio Analog Stereo"
> device.class = "monitor"
> alsa.card = "0"
> alsa.card_name = "HDA Intel"
> alsa.long_card_name = "HDA Intel at 0xf9ff8000 irq 310"
> alsa.driver_name = "snd_hda_intel"
> device.bus_path = "pci-0000:00:1b.0"
> sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
> device.bus = "pci"
> device.vendor.id = "8086"
> device.vendor.name = "Intel Corporation"
> device.product.id = "293e"
> device.product.name = "82801I (ICH9 Family) HD Audio Controller"
> device.form_factor = "internal"
> device.string = "0"
> module-udev-detect.discovered = "1"
> device.icon_name = "audio-card-pci"
>
>
More information about the users
mailing list