Cannot bring eth1 up

[Aaron Konstam]

On Tue, 2011-05-10 at 18:13 +0100, Aaron Gray wrote:
> I cannot seem to bring eth1 up.
> 
> # ifup eth1
> Error: Connection activation failed: Device not managed by
> NetworkManager or unavailable
> 
> # cat ifcfg-eth1
> GATEWAY0=192.168.0.1
> IPV6INIT=yes
> BROADCAST="192.168.1.255"
> DNS1=8.8.8.8
> UUID=9c92fad9-6ecb-3e6c-eb4d-8a47c6f50c04
> BOOTPROTO=none
> NAME="System eth1"
> PREFIX0=24
> MACADDR="00:26:18:E4:99:77"
> NM_CONTROLLED=yes
> IPV6_FAILURE_FATAL=no
> TYPE=Ethernet
> DEVICE=eth1
> IPADDR0=192.168.1.1
> IPV6_AUTOCONF=yes
> MTU=""
> NETMASK="255.255.255.0"
> IPV6_DEFROUTE=yes
> DEFROUTE=yes
> IPADDR="192.168.1.1"
> NETWORK=""
> IPV4_FAILURE_FATAL=yes
> ONBOOT=no
> HWADDR=00:26:18:E4:99:77
> IPV6_PEERDNS=yes
> IPV6_PEERROUTES=yes
> 
> Many thanks in advance,
> 
> Aaron
Ii aggree with Rick. Compare my ifcfg-eth1 to yours.

DEVICE="eth1"
ESSID="2WIRE924"
HWADDR="00:16:6F:40:E3:59"
NM_CONTROLLED="yes"
ONBOOT="no"

-- 
=======================================================================
Everything bows to success, even grammar.
=======================================================================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam at sbcglobal.net