strange behaviour of my desktop
antonio montagnani
antonio.montagnani at alice.it
Thu Sep 22 20:28:52 UTC 2011
Daniel J Walsh ha scritto / said the following il giorno/on
22/09/2011 22:13:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 09/22/2011 04:08 PM, antonio montagnani wrote:
>> Daniel J Walsh ha scritto / said the following il giorno/on
>> 22/09/2011 21:56: On 09/22/2011 03:42 PM, antonio montagnani
>> wrote:
>>>>> after two hours of operation my Fedora 15 shuts down and
>>>>> system reboots byitself suddenly: I was thinking that it was
>>>>> at the end of his life, but I noticed after rebooting that I
>>>>> was already logged as user and I got a message about Selinux
>>>>> stating that some cups/backend/hp could not write somewhere
>>>>> (I deleted the message by mistake).Any comment?
>> Sounds like a kernel issue or hardware, overheating. I doubt this
>> is an SELinux issue. I would look in the /var/log/messages for
>> indication of why the system is going down.
>>
>> This is tthe kernel message about Selinux:
>>> SELinux is preventing /usr/lib/cups/backend/hp from read access
>>> on the chr_file 044. For complete SELinux messages. run sealert
>>> -l b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2
>>
>> and this is the messages file and the crash happened between these
>> lines
>>> Sep 22 20:42:10 localhost python: io/hpmud/pp.c 627: unable to
>>> read device-id ret=-1 Sep 22 20:42:10 localhost
>>> udev-configure-printer: no corresponding CUPS device found Sep 22
>>> 20:42:12 localhost setroubleshoot: SELinux is preventing
>>> /usr/lib/cups/backend/hp from read access on the chr_file 044.
>>> For complete SELinux messages. run sealert -l
>>> b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2 Sep 22 20:42:14 localhost
>>> setroubleshoot: SELinux is preventing /usr/lib/cups/backend/hp
>>> from read access on the chr_file 044. For complete SELinux
>>> messages. run sealert -l b826ab3e-5b7c-4b13-84b3-cfa77eb8e7b2 Sep
>>> 22 20:49:30 localhost kernel: [ 5538.231226] [drm] nouveau
>>> 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) Sep
>>> 22 21:04:25 localhost kernel: [ 6433.067959] [drm] nouveau
>>> 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) Sep
>>> 22 21:09:15 localhost dbus: [system] Activating service
>>> name='org.freedesktop.PackageKit' (using servicehelper) Sep 22
>>> 21:09:15 localhost dbus: [system] Successfully activated service
>>> 'org.freedesktop.PackageKit' Sep 22 21:12:06 localhost kernel: [
>>> 6894.301934] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on
>>> vga encoder (output 0) Sep 22 21:18:39 localhost kernel: imklog
>>> 5.8.2, log source = /proc/kmsg started. Sep 22 21:18:39 localhost
>>> rsyslogd: [origin software="rsyslogd" swVersion="5.8.2"
>>> x-pid="739" x-info="http://www.rsyslog.com"] start Sep 22
>>> 21:18:39 localhost kernel: [ 0.000000] Initializing cgroup
>>> subsys cpuset Sep 22 21:18:39 localhost kernel: [ 0.000000]
>>> Initializing cgroup subsys cpu Sep 22 21:18:39 localhost kernel:
>>> [ 0.000000] Linux version 2.6.40.4-5.fc15.i686.PAE
>>> (mockbuild at x86-14.phx2.fedoraproject.org) (gcc version 4.6.0
>>> 20110603 (Red Hat 4.6.0-10) (GCC) ) #1 SMP Tue Aug 30 14:43:52
>>> UTC 2011 Sep 22 21:18:39 localhost kernel: [ 0.000000]
>>> BIOS-provided physical RAM map: Sep 22 21:18:39 localhost kernel:
>>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00
>>> (usable) Sep 22 21:18:39 localhost kernel: [ 0.000000]
>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Sep 22
>>> 21:18:39 localhost kernel: [ 0.000000] BIOS-e820:
>>> 00000000000e0000 - 0000000000100000 (reserved)
>>
>> butfrom sensors I get
>>> sensors atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage:
>>> +1.37 V (min = +1.45 V, max = +1.75 V) +3.3 Voltage:
>>> +1.60 V (min = +3.00 V, max = +3.60 V) +5.0 Voltage:
>>> +1.62 V (min = +4.50 V, max = +5.50 V) +12.0 Voltage:
>>> +11.98 V (min = +11.20 V, max = +13.20 V) CPU FAN Speed:
>>> 3068 RPM (min = 0 RPM) CHASSIS FAN Speed: 2410 RPM (min =
>>> 0 RPM) CPU Temperature: +50.0°C (high = +90.0°C, crit =
>>> +125.0°C) MB Temperature: +46.0°C (high = +70.0°C, crit =
>>> +125.0°C) Power Temperature: +123.0°C (high = +80.0°C, crit =
>>> +125.0°C)
>>>
>>> w83627ehf-isa-0290 Adapter: ISA adapter Vcore: +1.37 V
>>> (min = +0.00 V, max = +1.85 V) in1: +1.82 V (min =
>>> +0.00 V, max = +0.03 V) ALARM AVCC: +3.22 V (min =
>>> +0.00 V, max = +0.00 V) ALARM +3.3V: +3.20 V (min =
>>> +0.00 V, max = +0.06 V) ALARM in4: +2.04 V (min =
>>> +0.00 V, max = +0.00 V) ALARM in5: +1.62 V (min =
>>> +0.00 V, max = +0.00 V) ALARM in6: +1.97 V (min =
>>> +0.00 V, max = +0.00 V) ALARM 3VSB: +3.18 V (min =
>>> +0.00 V, max = +0.00 V) ALARM Vbat: +0.00 V (min =
>>> +0.00 V, max = +0.00 V) in9: +1.35 V (min = +0.00 V,
>>> max = +0.00 V) ALARM fan1: 2410 RPM (min = 168750 RPM,
>>> div = 4) ALARM fan2: 3068 RPM (min = 0 RPM, div = 2)
>>> ALARM fan3: 0 RPM (min = 164 RPM, div = 128) ALARM
>>> fan5: 0 RPM (min = 0 RPM, div = 4) temp1:
>>> +46.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor =
>>> thermistor temp2: +50.0°C (high = +80.0°C, hyst =
>>> +75.0°C) sensor = diode temp3: +123.5°C (high = +80.0°C,
>>> hyst = +75.0°C) ALARM sensor = thermistor
>>
>>
>>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.11 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>
> iEYEARECAAYFAk57ltEACgkQrlYvE4MpobOengCfXd1zQsSS3nFkt+WS1X6FTmeu
> YHcAnjTbMiwJ0MJJ5L+PPBsVzL82LEXv
> =UgVD
> -----END PGP SIGNATURE-----
I miss your comment: but whyreboot starts with imklog??
Forgot to say that I am experiencing reboots ona rgularbasis, i.e. every
two hours more or less
--
Antonio
--------------------------------------------
Prima di stampare pensa all'ambiente
Think about environment before printing
Skype: amontag52
Linux Fedora 15 Lovelock on Casa
Linux user number 362582
http://www.campingmonterosa.com
http://www.studiodacolpaloschi.it
-------------------------------------------
More information about the users
mailing list