Sound input problem after F15 update

[Michael Eager]

Hi --

I updated Fedora 15 a few days ago and now I don't have sound input.
The input device is a Hauppauge tuner and it is recognized:

[    8.738997] snd_bt87x 0000:09:01.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.739193] ALSA sound/pci/bt87x.c:931 bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[    8.741487] bttv: driver version 0.9.19 loaded
[    8.741490] bttv: using 8 buffers with 2080k (520 pages) each for capture
[    8.741530] bttv: Bt8xx card found (0).
[    8.741543] bttv 0000:09:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.741555] bttv0: Bt878 (rev 2) at 0000:09:01.0, irq: 17, latency: 64, mmio: 0xf8ffe000
[    8.741615] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[    8.741618] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[    8.741650] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
[    8.744158] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[    8.745251] IR NEC protocol handler initialized
[    8.767303] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb3
[    8.783371] tveeprom 0-0050: Hauppauge model 62471, rev A   , serial# 1106761
[    8.783374] tveeprom 0-0050: tuner model is Philips FM1236 (idx 23, type 2)
[    8.783377] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
[    8.783379] tveeprom 0-0050: audio processor is TDA9850 (idx 3)
[    8.783381] tveeprom 0-0050: has radio
[    8.783383] bttv0: Hauppauge eeprom indicates model#62471
[    8.783385] bttv0: tuner type=2

Pulseaudio volume control shows the BT as an input device, but the volume
display doesn't show anything.  The playback tab only shows "System Sounds".

There is also an internal sound card which shows up in pulse audio.  When
the audio source is plugged in to this input, it does show up in the pulseaudio
volume display, but there is no sound output.

Playing audio from Rhythmbox works OK.  (When this is running, the playback
tab shows Rhythmbox.)

Any help?

-- 
Michael Eager	 eager at eagercon.com
1960 Park Blvd., Palo Alto, CA 94306  650-325-8077