[F18] Cannot mount SD card

[Frédéric Bron]

When I plug my SD card, nothing happens.
dmesg gives what's written below.
On another computer, I have installed kernel-modules-extra. Any link with that?
I am also going to update the kernel to 3.7.9.
Frédéric

[12658.129346] scsi 7:0:0:0: Direct-Access     Canon    MP610 series
  1050 PQ: 0 ANSI: 2
[12658.131654] sd 7:0:0:0: Attached scsi generic sg4 type 0
[12658.134801] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[12658.936046] usblp0: removed
[12658.939633] usblp 1-1.2.4:1.1: usblp0: USB Bidirectional printer
dev 7 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1725
[12732.087875] usblp0: removed
[12801.561812] usblp 1-1.2.4:1.1: usblp0: USB Bidirectional printer
dev 7 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1725
[13018.852000] usblp0: removed
[13056.549171] usblp 1-1.2.4:1.1: usblp0: USB Bidirectional printer
dev 7 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1725
[13190.017173] usblp0: removed
[13588.821737] usb 1-1.2.4: reset high-speed USB device number 7 using ehci_hcd
[13603.871957] usb 1-1.2.4: device descriptor read/64, error -110
[13619.023288] usb 1-1.2.4: device descriptor read/64, error -110
[13619.196937] usb 1-1.2.4: reset high-speed USB device number 7 using ehci_hcd
[13634.236126] usb 1-1.2.4: device descriptor read/64, error -110
[13649.376296] usb 1-1.2.4: device descriptor read/64, error -110
[13649.539078] usb 1-1.2.4: reset high-speed USB device number 7 using ehci_hcd
[13659.925125] usb 1-1.2.4: device not accepting address 7, error -110
[13659.998495] usb 1-1.2.4: reset high-speed USB device number 7 using ehci_hcd
[13670.384444] usb 1-1.2.4: device not accepting address 7, error -110
[13670.385522] sd 7:0:0:0: Device offlined - not ready after error recovery
[13670.386033] usb 1-1.2.4: USB disconnect, device number 7
[13670.451496] usb 1-1.2.4: new high-speed USB device number 8 using ehci_hcd
[13685.501894] usb 1-1.2.4: device descriptor read/64, error -110
[13700.642163] usb 1-1.2.4: device descriptor read/64, error -110
[13700.804917] usb 1-1.2.4: new high-speed USB device number 9 using ehci_hcd
[13715.844271] usb 1-1.2.4: device descriptor read/64, error -110
[13730.995315] usb 1-1.2.4: device descriptor read/64, error -110
[13731.169068] usb 1-1.2.4: new high-speed USB device number 10 using ehci_hcd
[13741.555178] usb 1-1.2.4: device not accepting address 10, error -110
[13741.618486] usb 1-1.2.4: new high-speed USB device number 11 using ehci_hcd
[13752.004437] usb 1-1.2.4: device not accepting address 11, error -110
[13752.004809] hub 1-1.2:1.0: unable to enumerate USB device on port 4