exfat on SD card getting mounted read-only

[jd1008]

On 08/26/2014 06:05 PM, Tim wrote:
> On Tue, 2014-08-26 at 12:10 -0600, jd1008 wrote:
>> It is a slider about 2mm or 2.5mm long and almost 1mm thick.
>> When in the up position (towards the corner which goes into the
>> controller) it is supposed to tell the controller write lock off
>> (disabled). But it is not working in my machine because some bloggers
>> say that the slider needs to protrude a little farther away from the
>> body of the sd card in order for the sensor to turn off (the
>> on-by-default) write lock.
> I can't remember if you've already made a comment about trying this; but
> have you tried putting a sticker around the card?
>
>
I tried 1 layer of tape over the lock slider. More than 1 layer
of tape makes the card too hard to insert into the slot. It really
is a very tight does not seem to provide much play root.