<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
  <META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
  <META NAME="GENERATOR" CONTENT="GtkHTML/3.0.9">
</HEAD>
<BODY>
Sorry to hear it, but it's nice to know it's an error that has been duplicated.<BR>
<BR>
The only thing strange about my system that I haven't mentioned so far is that the boot partition (/boot) is on a standard partition on /dev/sda1, while the root partition (/) is on a logical volume (/dev/Volume00/LogVol00) that is shared between the remainder of /dev/sda and /dev/sdb.<BR>
<BR>
I would think that if this situation were an impossibility, that neither the SMP or the non-SMP kernel would boot.<BR>
<BR>
I have a vary similar config as you, lspci output follows:<BR>
<BR>
00:00.0 Host bridge: Intel Corp. 440GX - 82443GX Host bridge<BR>
00:01.0 PCI bridge: Intel Corp. 440GX - 82443GX AGP bridge<BR>
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)<BR>
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)<BR>
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)<BR>
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)<BR>
00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)<BR>
00:13.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)<BR>
01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] (rev 11)<BR>
02:0a.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891/7890<BR>
02:0e.0 SCSI storage controller: Adaptec AIC-7880U (rev 01)<BR>
<BR>
Regards,<BR>
Joseph<BR>
<BR>
On Tue, 2003-11-11 at 09:16, Douglas Furlong wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE><FONT COLOR="#737373"><I>Hi Joseph.

I thought I would just add my voice/concern to yours.

I am suffering from identicle issues as your self, and have also tried
compiling the kernel from the redhat-source package using one of the
provided config files, and modifying to provide SMP support.

I have 2 PII 350 CPU's, and compiled the kernel appropriately.

Below are some details for my system.

-----------------------
lspci

00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
0a)
00:0d.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 0a)
00:10.0 USB Controller: Lucent Microelectronics USS-344S USB Controller
(rev 11)
00:10.1 USB Controller: Lucent Microelectronics USS-344S USB Controller
(rev 11)
00:10.2 USB Controller: Lucent Microelectronics USS-344S USB Controller
(rev 11)
00:10.3 USB Controller: Lucent Microelectronics USS-344S USB Controller
(rev 11)
00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
00:13.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2
MX/MX 400] (rev b2)
02:09.0 SCSI storage controller: Adaptec AIC-7892B U160/m (rev 02)
02:0a.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891/7890

---------------------------------

I am currently at work so can't provide the motherboard chipset, however
when I get home, I shall provide said info.

Doug

On Tue, 2003-11-11 at 16:59, Joseph M Bironas wrote:
&gt; Okay, my final post on this issue unless we can manage to get a thread
&gt; going.
&gt; 
&gt; Background:
&gt; 
&gt; Fedora Core SMP kernel hangs when booting. I get the following output-
&gt; 
&gt;   Booting 'Fedora Core (2.4.22-1.2115.nptlsmp)'
&gt; 
&gt; root (hd0,0)
&gt;   Filesystem type is ext2fs, partition type is 0x83
&gt; kernel /vmlinuz-2.4.22-1.2155.nptlsmp ro root=/dev/Volume00/LogVol00
&gt;   [Linux-bzImage, setup=0x1400, size=0x148493]
&gt; initrd /initrd-2.4.22-1.2115.nptlsmp.img
&gt;   [Linux-initrd @ 0x1ff60000, 0x8dd39 bytes]
&gt; 
&gt; Uncompressing Linux... Ok, booting the kernel
&gt; 
&gt; After some research I've discovered that most of the time this issue
&gt; comes up as 1) The wrong architecture kernel, or 2) No VT module
&gt; compiled into the kernel.
&gt; 
&gt; 2 Is not the case as I'm assuming the SMP kernel uses the same general
&gt; VT config as the non-SMP kernel, and that shows output just fine.
&gt; Also, I've recompiled the SMP kernel from source using
&gt; /boot/config-2.4.22-1.2115.nptlsmp as my .config and verified that VT
&gt; and SMP (and other modules that were needed) were in fact part of the
&gt; compile. No love on any of those fronts, the custom kernel still
&gt; refuses to boot. Which rules out option 1, the recompiled kernel is
&gt; indeed from my architecture and still refuses to boot.
&gt; 
&gt; My question is, 1) Has anyone seen, and hopefully resolved this issue?
&gt; and 2) If not, where is the appropriate mailing list to start having a
&gt; discussion about debugging and solving this issue? It's a serious show
&gt; stopper for me in the long run, and I'd like to participate in any way
&gt; necessary to help solve it.
&gt; 
&gt; Regards,
&gt; Joseph
&gt; 


--
fedora-list mailing list
fedora-list@redhat.com</FONT>
<A HREF="http://www.redhat.com/mailman/listinfo/fedora-list"><U>http://www.redhat.com/mailman/listinfo/fedora-list</U></I></A></PRE>
</BLOCKQUOTE>
<PRE><TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>

<HR>
<BR>
<FONT SIZE="3"><TT><BR>
--|\--/_|------------/|-------Joseph M. Bironas--------------------<BR>
--|/----|-----|-----//|-----------------------------&lt;&gt;---|---------<BR>
-/|_----------|----|/-|</FONT><A HREF="mailto:-------josebiro@iglou.com----"><FONT SIZE="3"><U>------joseph@josebiro.com----</U></FONT></A><FONT SIZE="3">|----|---------<BR>
/-|-\-/_|----&lt;&gt;----|-&lt;&gt;-----------------------------|---&lt;&gt;---------<BR>
\_|_/---|---------&lt;&gt;-----------------------------------------------<BR>
&nbsp; |&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &quot;Let the Music be your master,<BR>
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Will you heed the Master's call&quot;</TT></FONT><BR>
<BR>
</TD>
</TR>
</TABLE>
</PRE>
</BODY>
</HTML>