Over the last several days I have had recurring failures burning DVDs with brasero on F12. It starts to write the disk and then fails with the following error:<br><br>SCSI error on write(716608,16): [5 21 00] Lba out of range<br>
<br>I have attached the brasero log.<br><br>The last few entries are:<br><br>BraseroLibburn called brasero_job_get_session_output_size<br>BraseroLibburn called brasero_job_set_current_action<br>BraseroLibburn called brasero_job_get_session_output_size<br>
BraseroLibburn called brasero_job_set_current_action<br>BraseroLibburn SCSI error condition on command 2Ah WRITE(10): [5 21 00] Lba out of range<br>BraseroLibburn called brasero_job_get_session_output_size<br>BraseroLibburn called brasero_job_set_current_action<br>
BraseroLibburn Libburn reported an error SCSI error on write(716608,16): [5 21 00] Lba out of range<br>BraseroLibburn called brasero_job_error<br>BraseroLibburn finished with an error<br>BraseroLibburn asked to stop because of an error<br>
error = 1<br> message = "SCSI error on write(716608,16): [5 21 00] Lba out of range"<br>BraseroLibburn stopping<br>Session error : SCSI error on write(716608,16): [5 21 00] Lba out of range (brasero_burn_record brasero-burn.c:2808)<br>
<br>If I retry burning the DVD I get the same error. The DVDs aren't bad since I've used them on another F12 system without error. I have successfully burned DVDs on this same system within the last week. This error started appearing after the most recent set of updates. However, my other F12 system is also up to date, but I have not seen any errors.<br>
<br>lspci output:<br><br>00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller<br>00:01.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge<br>00:06.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Secondary PCI Express Bridge<br>
00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit Network Connection (rev 02)<br>00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)<br>00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)<br>
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)<br>00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)<br>00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)<br>
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)<br>00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)<br>00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)<br>
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)<br>00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)<br>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)<br>
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)<br>00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)<br>00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)<br>
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)<br>01:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1)<br>04:04.0 Ethernet controller: Linksys Gigabit Network Adapter (rev 10)<br>
04:05.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem<br>04:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)<br><br>I have rebooted the system, but that didn't fix the problem. I succeeded in burning 1 DVD, but the problem occurred burning a second DVD.<br>
<br>Any ideas?<br><br>Paolo<br><br>