Hi<br>I am passing a lot of info from my USB pendrive to the hard drive<br><br>I am using FC16 (Linux pepewin 3.1.6-1.fc16.x86_64 #1 SMP Wed Dec 21 22:41:17 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux )<br><br>I am curious, why if I have a USB 2.0 full speed device --supposedly <i>480 Mbit/s</i> (60 MB/s), I only see a transfer speed on the jobs notification window of 600 KiB/s<br>
<br>I have an Intel DG31PR motherboard with 8 USB2.0 ports. The controller chip is an Intel 82801GB (ICH7).<br>I see the note about "not running at top speed, connect to a high speed hub", but how do I enable the high speed hub if as far as I know, they all are supposed to be high speed hubs?<br>
<br><br>[ 1.622334] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001<br>[ 1.622336] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1<br>[ 1.622337] usb usb2: Product: UHCI Host Controller<br>
[ 1.622339] usb usb2: Manufacturer: Linux 3.1.6-1.fc16.x86_64 uhci_hcd<br>[ 1.622340] usb usb2: SerialNumber: 0000:00:1d.0<br>[ 5264.333018] usb 2-2: new full speed USB device number 2 using uhci_hcd<br>[ 5264.468024] usb 2-2: not running at top speed; connect to a high speed hub<br>
[ 5264.498030] usb 2-2: New USB device found, idVendor=0930, idProduct=6545<br>[ 5264.498034] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3<br>[ 5264.498036] usb 2-2: Product: DataTraveler 112<br>[ 5264.498037] usb 2-2: Manufacturer: Kingston<br>
[ 5264.498039] usb 2-2: SerialNumber: XXXXXXXXXXXXXXXXXXXXXXXXXXXXx<br>[ 5264.503044] scsi6 : usb-storage 2-2:1.0<br><br>The device is directly connected to a USB port on the back of the computer (to make sure it is directly connected to the motherboard, nothing in between).<br clear="all">
<br>-- <br>------------------------------<br> /\_/\ <br> |O O| <a href="mailto:pepebuho@gmail.com">pepebuho@gmail.com</a><br> ~~~~ Javier Perez<br> ~~~~ While the night runs<br> ~~~~ toward the day...<br>
m m Pepebuho watches <br> from his high perch. <br>