smartctl -C /dev/sdb1 <br><br>smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-34-generic] (local build)<br>Copyright (C) 2002-11 by Bruce Allen, <a href="http://smartmontools.sourceforge.net">http://smartmontools.sourceforge.net</a><br>
<br>=== START OF READ SMART DATA SECTION ===<br>SMART overall-health self-assessment test result: FAILED!<br>Drive failure expected in less than 24 hours. SAVE ALL DATA.<br>Failed Attributes:<br>ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE<br>
5 Reallocated_Sector_Ct 0x0033 001 001 036 Pre-fail Always FAILING_NOW 2042<br><br>smartctl -a /dev/sdb1 <br><br>smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-34-generic] (local build)<br>Copyright (C) 2002-11 by Bruce Allen, <a href="http://smartmontools.sourceforge.net">http://smartmontools.sourceforge.net</a><br>
<br>=== START OF INFORMATION SECTION ===<br>Model Family: Seagate Barracuda ES.2<br>Device Model: ST3500320NS<br>Serial Number: 9QMCB7P6<br>LU WWN Device Id: 5 000c50 019e90f65<br>Firmware Version: SN06<br>User Capacity: 500,107,862,016 bytes [500 GB]<br>
Sector Size: 512 bytes logical/physical<br>Device is: In smartctl database [for details use: -P show]<br>ATA Version is: 8<br>ATA Standard is: ATA-8-ACS revision 4<br>Local Time is: Wed Dec 12 10:57:03 2012 EST<br>
SMART support is: Available - device has SMART capability.<br>SMART support is: Enabled<br><br>=== START OF READ SMART DATA SECTION ===<br>SMART overall-health self-assessment test result: FAILED!<br>Drive failure expected in less than 24 hours. SAVE ALL DATA.<br>
See vendor-specific Attribute list for failed Attributes.<br><br>General SMART Values:<br>Offline data collection status: (0x82) Offline data collection activity<br> was completed without error.<br>
Auto Offline Data Collection: Enabled.<br>Self-test execution status: ( 0) The previous self-test routine completed<br> without error or no self-test has ever <br> been run.<br>
Total time to complete Offline <br>data collection: ( 625) seconds.<br>Offline data collection<br>capabilities: (0x7b) SMART execute Offline immediate.<br> Auto Offline data collection on/off support.<br>
Suspend Offline collection upon new<br> command.<br> Offline surface scan supported.<br> Self-test supported.<br> Conveyance Self-test supported.<br>
Selective Self-test supported.<br>SMART capabilities: (0x0003) Saves SMART data before entering<br> power-saving mode.<br> Supports SMART auto save timer.<br>
Error logging capability: (0x01) Error logging supported.<br> General Purpose Logging supported.<br>Short self-test routine <br>recommended polling time: ( 1) minutes.<br>Extended self-test routine<br>
recommended polling time: ( 110) minutes.<br>Conveyance self-test routine<br>recommended polling time: ( 2) minutes.<br>SCT capabilities: (0x103d) SCT Status supported.<br> SCT Error Recovery Control supported.<br>
SCT Feature Control supported.<br> SCT Data Table supported.<br><br>SMART Attributes Data Structure revision number: 10<br>Vendor Specific SMART Attributes with Thresholds:<br>ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE<br>
1 Raw_Read_Error_Rate 0x000f 069 045 044 Pre-fail Always - 8074151<br> 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0<br> 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 62<br>
5 Reallocated_Sector_Ct 0x0033 001 001 036 Pre-fail Always FAILING_NOW 2042<br> 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 4419180241<br> 9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 22497<br>
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0<br> 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 62<br>184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0<br>
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1981<br>188 Command_Timeout 0x0032 100 099 000 Old_age Always - 12885098499<br>189 High_Fly_Writes 0x003a 097 097 000 Old_age Always - 3<br>
190 Airflow_Temperature_Cel 0x0022 064 059 045 Old_age Always - 36 (Min/Max 36/41)<br>194 Temperature_Celsius 0x0022 036 041 000 Old_age Always - 36 (0 15 0 0)<br>195 Hardware_ECC_Recovered 0x001a 042 035 000 Old_age Always - 8074151<br>
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0<br>198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0<br>199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0<br>
<br>SMART Error Log Version: 1<br>ATA Error Count: 1246 (device log contains only the most recent five errors)<br> CR = Command Register [HEX]<br> FR = Features Register [HEX]<br> SC = Sector Count Register [HEX]<br>
SN = Sector Number Register [HEX]<br> CL = Cylinder Low Register [HEX]<br> CH = Cylinder High Register [HEX]<br> DH = Device/Head Register [HEX]<br> DC = Device Command Register [HEX]<br> ER = Error register [HEX]<br>
ST = Status register [HEX]<br>Powered_Up_Time is measured from power on, and printed as<br>DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,<br>SS=sec, and sss=millisec. It "wraps" after 49.710 days.<br>
<br>Error 1246 occurred at disk power-on lifetime: 22142 hours (922 days + 14 hours)<br> When the command that caused the error occurred, the device was active or idle.<br><br> After command completion occurred, registers were:<br>
ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455<br><br> Commands leading to the command that caused the error were:<br> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name<br>
-- -- -- -- -- -- -- -- ---------------- --------------------<br> 25 00 00 ff ff ff ef 00 8d+05:15:09.200 READ DMA EXT<br> 27 00 00 00 00 00 e0 00 8d+05:15:09.171 READ NATIVE MAX ADDRESS EXT<br> ec 00 00 00 00 00 a0 00 8d+05:15:09.091 IDENTIFY DEVICE<br>
ef 03 46 00 00 00 a0 00 8d+05:15:09.071 SET FEATURES [Set transfer mode]<br> 27 00 00 00 00 00 e0 00 8d+05:15:09.043 READ NATIVE MAX ADDRESS EXT<br><br>Error 1245 occurred at disk power-on lifetime: 22142 hours (922 days + 14 hours)<br>
When the command that caused the error occurred, the device was active or idle.<br><br> After command completion occurred, registers were:<br> ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455<br>
<br> Commands leading to the command that caused the error were:<br> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name<br> -- -- -- -- -- -- -- -- ---------------- --------------------<br> 25 00 00 ff ff ff ef 00 8d+05:15:06.024 READ DMA EXT<br>
27 00 00 00 00 00 e0 00 8d+05:15:05.995 READ NATIVE MAX ADDRESS EXT<br> ec 00 00 00 00 00 a0 00 8d+05:15:05.987 IDENTIFY DEVICE<br> ef 03 46 00 00 00 a0 00 8d+05:15:05.943 SET FEATURES [Set transfer mode]<br>
27 00 00 00 00 00 e0 00 8d+05:15:05.915 READ NATIVE MAX ADDRESS EXT<br><br>Error 1244 occurred at disk power-on lifetime: 22142 hours (922 days + 14 hours)<br> When the command that caused the error occurred, the device was active or idle.<br>
<br> After command completion occurred, registers were:<br> ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455<br><br> Commands leading to the command that caused the error were:<br>
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name<br> -- -- -- -- -- -- -- -- ---------------- --------------------<br> 25 00 00 ff ff ff ef 00 8d+05:15:02.836 READ DMA EXT<br> 27 00 00 00 00 00 e0 00 8d+05:15:02.807 READ NATIVE MAX ADDRESS EXT<br>
ec 00 00 00 00 00 a0 00 8d+05:15:02.799 IDENTIFY DEVICE<br> ef 03 46 00 00 00 a0 00 8d+05:15:02.755 SET FEATURES [Set transfer mode]<br> 27 00 00 00 00 00 e0 00 8d+05:15:02.727 READ NATIVE MAX ADDRESS EXT<br>
<br>Error 1243 occurred at disk power-on lifetime: 22142 hours (922 days + 14 hours)<br> When the command that caused the error occurred, the device was active or idle.<br><br> After command completion occurred, registers were:<br>
ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455<br><br> Commands leading to the command that caused the error were:<br> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name<br>
-- -- -- -- -- -- -- -- ---------------- --------------------<br> 25 00 00 ff ff ff ef 00 8d+05:14:59.672 READ DMA EXT<br> 27 00 00 00 00 00 e0 00 8d+05:14:59.643 READ NATIVE MAX ADDRESS EXT<br> ec 00 00 00 00 00 a0 00 8d+05:14:59.636 IDENTIFY DEVICE<br>
ef 03 46 00 00 00 a0 00 8d+05:14:59.590 SET FEATURES [Set transfer mode]<br> 27 00 00 00 00 00 e0 00 8d+05:14:59.563 READ NATIVE MAX ADDRESS EXT<br><br>Error 1242 occurred at disk power-on lifetime: 22142 hours (922 days + 14 hours)<br>
When the command that caused the error occurred, the device was active or idle.<br><br> After command completion occurred, registers were:<br> ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455<br>
<br> Commands leading to the command that caused the error were:<br> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name<br> -- -- -- -- -- -- -- -- ---------------- --------------------<br> 25 00 00 ff ff ff ef 00 8d+05:14:56.149 READ DMA EXT<br>
25 00 00 ff ff ff ef 00 8d+05:14:55.549 READ DMA EXT<br> 25 00 00 ff ff ff ef 00 8d+05:14:54.770 READ DMA EXT<br> 25 00 00 ff ff ff ef 00 8d+05:14:53.141 READ DMA EXT<br> 25 00 00 ff ff ff ef 00 8d+05:14:51.106 READ DMA EXT<br>
<br>SMART Self-test log structure revision number 1<br>Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error<br># 1 Short offline Completed: unknown failure 90% 21203 0<br>
# 2 Short offline Completed: unknown failure 90% 21203 0<br># 3 Conveyance offline Completed: unknown failure 90% 21203 0<br><br>SMART Selective self-test log data structure revision number 1<br>
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS<br> 1 0 0 Not_testing<br> 2 0 0 Not_testing<br> 3 0 0 Not_testing<br> 4 0 0 Not_testing<br> 5 0 0 Not_testing<br>
Selective self-test flags (0x0):<br> After scanning selected spans, do NOT read-scan remainder of disk.<br>If Selective self-test is pending on power-up, resume after 0 minute delay.<br><br><br><div class="gmail_extra"><br>
<br><div class="gmail_quote">On Wed, Dec 12, 2012 at 10:39 AM, Steven Stern <span dir="ltr"><<a href="mailto:subscribed-lists@sterndata.com" target="_blank">subscribed-lists@sterndata.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div class="HOEnZb"><div class="h5">On 12/11/2012 04:22 PM, L wrote:<br>
> Hi<br>
> The disk utility shows one of my disks are failling. I check it using<br>
><br>
> sudo e2fsck -f -c -v /dev/sdb1<br>
> e2fsck 1.42 (29-Nov-2011)<br>
> Checking for bad blocks (read-only test): 0.00% done, 0:00 elapsed.<br>
> (0/0/0 errdone<br>
> 500G: Updating bad block inode.<br>
> Pass 1: Checking inodes, blocks, and sizes<br>
> Pass 2: Checking directory structure<br>
> Pass 3: Checking directory connectivity<br>
> Pass 4: Checking reference counts<br>
> Pass 5: Checking group summary information<br>
><br>
> 500G: ***** FILE SYSTEM WAS MODIFIED *****<br>
><br>
> 124186 inodes used (0.41%)<br>
> 2600 non-contiguous files (2.1%)<br>
> 195 non-contiguous directories (0.2%)<br>
> # of inodes with ind/dind/tind blocks: 0/0/0<br>
> Extent depth histogram: 120688/867<br>
> 52973023 blocks used (43.39%)<br>
> 0 bad blocks<br>
> 1 large file<br>
><br>
> 118955 regular files<br>
> 2148 directories<br>
> 0 character device files<br>
> 0 block device files<br>
> 0 fifos<br>
> 0 links<br>
> 3074 symbolic links (2623 fast symbolic links)<br>
> 0 sockets<br>
> --------<br>
> 124177 files<br>
><br>
> I am confused if this disk is really failing??<br>
><br>
> Yuan<br>
<br>
><br>
><br>
<br>
</div></div>What does smartctl /dev/sdb -H and smartctl /dev/sdb -a show?<br>
<span class="HOEnZb"><font color="#888888"><br>
--<br>
-- Steve<br>
--<br>
users mailing list<br>
<a href="mailto:users@lists.fedoraproject.org">users@lists.fedoraproject.org</a><br>
To unsubscribe or change subscription options:<br>
<a href="https://admin.fedoraproject.org/mailman/listinfo/users" target="_blank">https://admin.fedoraproject.org/mailman/listinfo/users</a><br>
Guidelines: <a href="http://fedoraproject.org/wiki/Mailing_list_guidelines" target="_blank">http://fedoraproject.org/wiki/Mailing_list_guidelines</a><br>
Have a question? Ask away: <a href="http://ask.fedoraproject.org" target="_blank">http://ask.fedoraproject.org</a><br>
</font></span></blockquote></div><br><br clear="all"><br>-- <br> °v°<br> /( $ )\ Linux Toys<br> ^ ^ <a href="http://linuxishbell.wordpress.com/" target="_blank">http://linuxishbell.wordpress.com/</a><br>
</div>