[Fedora-directory-users] FC3 - Back to cyrus-sasl

[Jason Kullo Sam]

Ok...guess I have to get this build going after all. Getting halfway 
through the make, then failing with the following error. Doh!

Attacked the cyrus install again. Did a make clean, then changed my mind 
and deleted entire folder and started all over with it. For some reason, 
the sasl make seemed to go this time(maybe I just needed to blow the 
folder out last time)...but, the make on ldapserver still failed. See 
below for log(snipped out bits of spam...) On the bright side...I'm 
actually learning lots! =D
====================================================================
[root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf -
tar: Read 2048 bytes from -
[root@genie ds]# cd cyrus-sasl-2.1.20
[root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure 
--enable-gssapi=/usr/kerberos/include/--enable-static --without-des 
--without-openssl
configure: creating cache ./config.cache
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
-------------------- SNIP Successful Config
updating cache .././config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: creating saslauthd.h
config.status: executing depfiles commands
Configuration Complete. Type 'make' to build.
[root@genie cyrus-sasl-2.1.20]# 

##########################
Onto the make...
##########################

Configuration Complete. Type 'make' to build.
[root@genie cyrus-sasl-2.1.20]# gmake
gmake  all-recursive
gmake[1]: Entering directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
Making all in include
gmake[2]: Entering directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
if gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -W -O2 -MT makemd5.o -MD 
-MP -MF ".deps/makemd5.Tpo" \
  -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \
then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \
else rm -f ".deps/makemd5.Tpo"; exit 1; \
fi
/bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o makemd5  
makemd5.o  -lresolv
mkdir .libs

------------------- SNIP Make spam ----------------------------

if gcc -DHAVE_CONFIG_H 
-DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. -I. 
-I.. -I. -I. -I. -I./include -I./include -I./../include    -O2 -MT 
saslauthd-main.o -MD -MP -MF ".deps/saslauthd-main.Tpo" \
  -c -o saslauthd-main.o `test -f 'saslauthd-main.c' || echo 
'./'`saslauthd-main.c; \
then mv ".deps/saslauthd-main.Tpo" ".deps/saslauthd-main.Po"; \
else rm -f ".deps/saslauthd-main.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H 
-DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. -I. 
-I.. -I. -I. -I. -I./include -I./include -I./../include    -O2 -MT md5.o 
-MD -MP -MF ".deps/md5.Tpo" \
  -c -o md5.o `test -f 'md5.c' || echo './'`md5.c; \
then mv ".deps/md5.Tpo" ".deps/md5.Po"; \
else rm -f ".deps/md5.Tpo"; exit 1; \
fi
gcc  -O2   -o saslauthd  mechanisms.o auth_dce.o auth_getpwent.o 
auth_krb5.o auth_krb4.o auth_pam.o auth_rimap.o auth_shadow.o auth_sia.o 
auth_sasldb.o lak.o auth_ldap.o cache.o utils.o ipc_unix.o ipc_doors.o 
saslauthd-main.o md5.o -lcrypt -lresolv      -lresolv
gmake[3]: Leaving directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd'
gmake[2]: Leaving directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd'
gmake[2]: Entering directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
gmake[2]: Leaving directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
gmake[1]: Leaving directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
[root@genie cyrus-sasl-2.1.20]#       

#######################################
Seems to have compiled right that time for some reason...weird...
#######################################
  
[root@genie cyrus-sasl-2.1.20]# cd ..
[root@genie ds]# ls
09.23                              icu-2.4.tgz
09.27                              ldapserver
cyrus-sasl-2.1.20                  mozilla
cyrus-sasl-2.1.20.tar.gz           mozilla-components.tar.gz
db-4.2.52.NC                       net-snmp-5.2.1
db-4.2.52.NC.tar.gz                net-snmp-5.2.1.tar.gz
fedora-adminutil-devel-7.1         patch.4.2.52.1
fedora-adminutil-devel-7.1.tar.gz  patch.4.2.52.2
fedora-setuputil-devel-7.1         patch.4.2.52.3
fedora-setuputil-devel-7.1.tar.gz  patch.4.2.52.4
icu
[root@genie ds]# cd ldapserver/
[root@genie ldapserver]# gmake USE_PERL_FROM_PATH=1 BUILD_DEBUG=optimize 
if test ! -d Linux; then mkdir Linux; fi;
/usr/bin/perl buildnum.pl -p Linux
NSOS_RELEASE is: 2.6
/usr/bin/perl pumpkin.pl 120 pumpkin.dat
The components are up to date


==== Starting LDAP Server ==========

gmake BUILD_OPT=1 NO_JAVA=1  nsCommon
gmake[1]: Entering directory `/root/Desktop/dsbuild-static/ds/ldapserver'

-------------------------- SNIP Make Spam

.o 
../../../built/Linux-domestic-optimize-normal-slapd/servers/obj/main.o   
-L../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server 
-lslapd -lldapu 
-L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lssl3 
-lnss3 -lsoftokn3 -L../../../../mozilla/dist/lib -lssldap50 -lldap50 
-lprldap50 -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib 
-lplc4 -lplds4 -lnspr4  
-L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -ldbm 
-lavl -lldif -llitekey  -ldl  
-L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lsvrcore 
-L../../../../cyrus-sasl-2.1.20/lib -lsasl2 -L/usr/kerberos/lib 
-lgssapi_krb5 -lcrypt -lpthread  -L../../../../db-4.2.52.NC/built/.libs 
-ldb-4.2
/usr/bin/ld: cannot find -lsasl2
collect2: ld returned 1 exit status
gmake[3]: *** 
[../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server/ns-slapd]

Error 1
gmake[3]: Leaving directory 
`/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers/slapd'
gmake[2]: *** [_slapd] Error 2
gmake[2]: Leaving directory 
`/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers'
gmake[1]: *** [ldapprogs] Error 2
gmake[1]: Leaving directory 
`/root/Desktop/dsbuild-static/ds/ldapserver/ldap'
gmake: *** [buildDirectory] Error 2
[root@genie ldapserver]# ls ../cyrus-sasl-2.1.20/lib
auxprop.c    client.lo  dlopen.o       Makefile.in       saslutil.o
auxprop.lo   client.o   external.c     md5.c             server.c
auxprop.o    common.c   external.lo    md5.lo            server.lo
canonusr.c   common.lo  external.o     md5.o             server.o
canonusr.lo  common.o   getaddrinfo.c  NTMakefile        seterror.c
canonusr.o   config.c   getnameinfo.c  plugin_common.lo  seterror.lo
checkpw.c    config.lo  getsubopt.c    plugin_common.o   seterror.o
checkpw.lo   config.o   libsasl2.la    saslint.h         snprintf.c
checkpw.o    dlopen.c   Makefile       saslutil.c        staticopen.h
client.c     dlopen.lo  Makefile.am    saslutil.lo       windlopen.c
[root@genie ldapserver]#

[Rich Megginson]

There is still no libsasl2.a.  I'm not sure what the problem is.  Try 
using "make" instead of "gmake" - perhaps gmake is slightly different
on 
your OS/version?

Jason Kullo Sam wrote:

>  Ok...guess I have to get this build going after all. Getting halfway
>
>  through the make, then failing with the following error. Doh!
>
>  Attacked the cyrus install again. Did a make clean, then changed my 
>  mind and deleted entire folder and started all over with it. For some 
>  reason, the sasl make seemed to go this time(maybe I just needed to 
>  blow the folder out last time)...but, the make on ldapserver still 
>  failed. See below for log(snipped out bits of spam...) On the bright 
>  side...I'm actually learning lots! =D
>  ====================================================================
>  [root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf -
>  tar: Read 2048 bytes from -
>  [root@genie ds]# cd cyrus-sasl-2.1.20
>  [root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure 
>  --enable-gssapi=/usr/kerberos/include/--enable-static --without-des 
>  --without-openssl
>  configure: creating cache ./config.cache
>  checking build system type... i686-pc-linux-gnu
>  checking host system type... i686-pc-linux-gnu
>  checking target system type... i686-pc-linux-gnu
>  -------------------- SNIP Successful Config
>  updating cache .././config.cache
>  configure: creating ./config.status
>  config.status: creating Makefile
>  config.status: creating saslauthd.h
>  config.status: executing depfiles commands
>  Configuration Complete. Type 'make' to build.
>  [root@genie cyrus-sasl-2.1.20]#
>  ##########################
>  Onto the make...
>  ##########################
>
>  Configuration Complete. Type 'make' to build.
>  [root@genie cyrus-sasl-2.1.20]# gmake
>  gmake  all-recursive
>  gmake[1]: Entering directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
>  Making all in include
>  gmake[2]: Entering directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
>  if gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -W -O2 -MT makemd5.o -MD 
>  -MP -MF ".deps/makemd5.Tpo" \
>   -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \
>  then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \
>  else rm -f ".deps/makemd5.Tpo"; exit 1; \
>  fi
>  /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o makemd5  
>  makemd5.o  -lresolv
>  mkdir .libs
>
>  ------------------- SNIP Make spam ----------------------------
>
>  if gcc -DHAVE_CONFIG_H 
>  -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. 
>  -I. -I.. -I. -I. -I. -I./include -I./include -I./../include    -O2 -MT 
>  saslauthd-main.o -MD -MP -MF ".deps/saslauthd-main.Tpo" \
>   -c -o saslauthd-main.o `test -f 'saslauthd-main.c' || echo 
>  './'`saslauthd-main.c; \
>  then mv ".deps/saslauthd-main.Tpo" ".deps/saslauthd-main.Po"; \
>  else rm -f ".deps/saslauthd-main.Tpo"; exit 1; \
>  fi
>  if gcc -DHAVE_CONFIG_H 
>  -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. 
>  -I. -I.. -I. -I. -I. -I./include -I./include -I./../include    -O2 -MT 
>  md5.o -MD -MP -MF ".deps/md5.Tpo" \
>   -c -o md5.o `test -f 'md5.c' || echo './'`md5.c; \
>  then mv ".deps/md5.Tpo" ".deps/md5.Po"; \
>  else rm -f ".deps/md5.Tpo"; exit 1; \
>  fi
>  gcc  -O2   -o saslauthd  mechanisms.o auth_dce.o auth_getpwent.o 
>  auth_krb5.o auth_krb4.o auth_pam.o auth_rimap.o auth_shadow.o 
>  auth_sia.o auth_sasldb.o lak.o auth_ldap.o cache.o utils.o ipc_unix.o 
>  ipc_doors.o saslauthd-main.o md5.o -lcrypt -lresolv      -lresolv
>  gmake[3]: Leaving directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd'
>  gmake[2]: Leaving directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd'
>  gmake[2]: Entering directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
>  gmake[2]: Leaving directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
>  gmake[1]: Leaving directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
>  [root@genie cyrus-sasl-2.1.20]#      
>  #######################################
>  Seems to have compiled right that time for some reason...weird...
>  #######################################
>   
>  [root@genie cyrus-sasl-2.1.20]# cd ..
>  [root@genie ds]# ls
>  09.23                              icu-2.4.tgz
>  09.27                              ldapserver
>  cyrus-sasl-2.1.20                  mozilla
>  cyrus-sasl-2.1.20.tar.gz           mozilla-components.tar.gz
>  db-4.2.52.NC                       net-snmp-5.2.1
>  db-4.2.52.NC.tar.gz                net-snmp-5.2.1.tar.gz
>  fedora-adminutil-devel-7.1         patch.4.2.52.1
>  fedora-adminutil-devel-7.1.tar.gz  patch.4.2.52.2
>  fedora-setuputil-devel-7.1         patch.4.2.52.3
>  fedora-setuputil-devel-7.1.tar.gz  patch.4.2.52.4
>  icu
>  [root@genie ds]# cd ldapserver/
>  [root@genie ldapserver]# gmake USE_PERL_FROM_PATH=1 
>  BUILD_DEBUG=optimize if test ! -d Linux; then mkdir Linux; fi;
>  /usr/bin/perl buildnum.pl -p Linux
>  NSOS_RELEASE is: 2.6
>  /usr/bin/perl pumpkin.pl 120 pumpkin.dat
>  The components are up to date
>
>
>  ==== Starting LDAP Server ==========
>
>  gmake BUILD_OPT=1 NO_JAVA=1  nsCommon
>  gmake[1]: Entering directory `/root/Desktop/dsbuild-static/ds/ldapserver'
>
>  -------------------------- SNIP Make Spam
>
>  .o 
>  ../../../built/Linux-domestic-optimize-normal-slapd/servers/obj/main.o   
>  -L../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server 
>  -lslapd -lldapu 
>  -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lssl3 
>  -lnss3 -lsoftokn3 -L../../../../mozilla/dist/lib -lssldap50 -lldap50 
>  -lprldap50 
>  -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lplc4 
>  -lplds4 -lnspr4  
>  -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -ldbm 
>  -lavl -lldif -llitekey  -ldl  
>  -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib 
>  -lsvrcore -L../../../../cyrus-sasl-2.1.20/lib -lsasl2 
>  -L/usr/kerberos/lib -lgssapi_krb5 -lcrypt -lpthread  
>  -L../../../../db-4.2.52.NC/built/.libs -ldb-4.2
>  /usr/bin/ld: cannot find -lsasl2
>  collect2: ld returned 1 exit status
>  gmake[3]: *** 
>
> [../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server/ns-slapd]
>
>  Error 1
>  gmake[3]: Leaving directory 
>  `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers/slapd'
>  gmake[2]: *** [_slapd] Error 2
>  gmake[2]: Leaving directory 
>  `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers'
>  gmake[1]: *** [ldapprogs] Error 2
>  gmake[1]: Leaving directory 
>  `/root/Desktop/dsbuild-static/ds/ldapserver/ldap'
>  gmake: *** [buildDirectory] Error 2
>  [root@genie ldapserver]# ls ../cyrus-sasl-2.1.20/lib
>  auxprop.c    client.lo  dlopen.o       Makefile.in       saslutil.o
>  auxprop.lo   client.o   external.c     md5.c             server.c
>  auxprop.o    common.c   external.lo    md5.lo            server.lo
>  canonusr.c   common.lo  external.o     md5.o             server.o
>  canonusr.lo  common.o   getaddrinfo.c  NTMakefile        seterror.c
>  canonusr.o   config.c   getnameinfo.c  plugin_common.lo  seterror.lo
>  checkpw.c    config.lo  getsubopt.c    plugin_common.o   seterror.o
>  checkpw.lo   config.o   libsasl2.la    saslint.h         snprintf.c
>  checkpw.o    dlopen.c   Makefile       saslutil.c        staticopen.h
>  client.c     dlopen.lo  Makefile.am    saslutil.lo       windlopen.c
>  [root@genie ldapserver]#                            
>  -- 
>  Fedora-directory-users mailing list
>  Fedora-directory-users(a)redhat.com
>  https://www.redhat.com/mailman/listinfo/fedora-directory-users

[Noriko Hosoi]

My cyrus sasl build creates a symbolic link to the lib directory like 
this.  Do you see it in your build log?

>  [...]
>  adding static plugins and dependencies
>  ar cru .libs/libsasl2.a ../plugins/sasldb.o ../sasldb/db_berkeley.o 
>  ../sasldb/allockey.o ../plugins/cram.o ../plugins/digestmd5.o 
>  ../plugins/gssapi.o ../plugins/plain.o ../plugins/anonymous.o
>  rm -f libsasl2.a
>  *ln -s .libs/libsasl2.a libsasl2.a*
>  gmake[2]: Leaving directory `/work/cyrus-sasl-2.1.20/lib' 
--noriko

Richard Megginson wrote:

>  There is still no libsasl2.a.  I'm not sure what the problem is. 
> Try 
>  using "make" instead of "gmake" - perhaps gmake is slightly different
>
>  on your OS/version?
>
>  Jason Kullo Sam wrote:
>
> > Ok...guess I have to get this build going after all. Getting halfway 
> > through the make, then failing with the following error. Doh!
> >
> > Attacked the cyrus install again. Did a make clean, then changed my 
> > mind and deleted entire folder and started all over with it. For some 
> > reason, the sasl make seemed to go this time(maybe I just needed to 
> > blow the folder out last time)...but, the make on ldapserver still 
> > failed. See below for log(snipped out bits of spam...) On the bright 
> > side...I'm actually learning lots! =D
> > ====================================================================
> > [root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf -
> > tar: Read 2048 bytes from -
> > [root@genie ds]# cd cyrus-sasl-2.1.20
> > [root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure 
> > --enable-gssapi=/usr/kerberos/include/--enable-static --without-des 
> > --without-openssl
> > configure: creating cache ./config.cache
> > checking build system type... i686-pc-linux-gnu
> > checking host system type... i686-pc-linux-gnu
> > checking target system type... i686-pc-linux-gnu
> > -------------------- SNIP Successful Config
> > updating cache .././config.cache
> > configure: creating ./config.status
> > config.status: creating Makefile
> > config.status: creating saslauthd.h
> > config.status: executing depfiles commands
> > Configuration Complete. Type 'make' to build.
> > [root@genie cyrus-sasl-2.1.20]#
> > ##########################
> > Onto the make...
> > ##########################
> >
> > Configuration Complete. Type 'make' to build.
> > [root@genie cyrus-sasl-2.1.20]# gmake
> > gmake  all-recursive
> > gmake[1]: Entering directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> > Making all in include
> > gmake[2]: Entering directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
> > if gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -W -O2 -MT makemd5.o 
> > -MD -MP -MF ".deps/makemd5.Tpo" \
> >  -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \
> > then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \
> > else rm -f ".deps/makemd5.Tpo"; exit 1; \
> > fi
> > /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o makemd5  
> > makemd5.o  -lresolv
> > mkdir .libs
> >
> > ------------------- SNIP Make spam ----------------------------
> >
> > if gcc -DHAVE_CONFIG_H 
> > -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. 
> > -I. -I.. -I. -I. -I. -I./include -I./include -I./../include    -O2 
> > -MT saslauthd-main.o -MD -MP -MF ".deps/saslauthd-main.Tpo" \
> >  -c -o saslauthd-main.o `test -f 'saslauthd-main.c' || echo 
> > './'`saslauthd-main.c; \
> > then mv ".deps/saslauthd-main.Tpo" ".deps/saslauthd-main.Po"; \
> > else rm -f ".deps/saslauthd-main.Tpo"; exit 1; \
> > fi
> > if gcc -DHAVE_CONFIG_H 
> > -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. 
> > -I. -I.. -I. -I. -I. -I./include -I./include -I./../include    -O2 
> > -MT md5.o -MD -MP -MF ".deps/md5.Tpo" \
> >  -c -o md5.o `test -f 'md5.c' || echo './'`md5.c; \
> > then mv ".deps/md5.Tpo" ".deps/md5.Po"; \
> > else rm -f ".deps/md5.Tpo"; exit 1; \
> > fi
> > gcc  -O2   -o saslauthd  mechanisms.o auth_dce.o auth_getpwent.o 
> > auth_krb5.o auth_krb4.o auth_pam.o auth_rimap.o auth_shadow.o 
> > auth_sia.o auth_sasldb.o lak.o auth_ldap.o cache.o utils.o ipc_unix.o 
> > ipc_doors.o saslauthd-main.o md5.o -lcrypt -lresolv      -lresolv
> > gmake[3]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd'
> > gmake[2]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd'
> > gmake[2]: Entering directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> > gmake[2]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> > gmake[1]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> > [root@genie cyrus-sasl-2.1.20]#      
> > #######################################
> > Seems to have compiled right that time for some reason...weird...
> > #######################################
> >  
> > [root@genie cyrus-sasl-2.1.20]# cd ..
> > [root@genie ds]# ls
> > 09.23                              icu-2.4.tgz
> > 09.27                              ldapserver
> > cyrus-sasl-2.1.20                  mozilla
> > cyrus-sasl-2.1.20.tar.gz           mozilla-components.tar.gz
> > db-4.2.52.NC                       net-snmp-5.2.1
> > db-4.2.52.NC.tar.gz                net-snmp-5.2.1.tar.gz
> > fedora-adminutil-devel-7.1         patch.4.2.52.1
> > fedora-adminutil-devel-7.1.tar.gz  patch.4.2.52.2
> > fedora-setuputil-devel-7.1         patch.4.2.52.3
> > fedora-setuputil-devel-7.1.tar.gz  patch.4.2.52.4
> > icu
> > [root@genie ds]# cd ldapserver/
> > [root@genie ldapserver]# gmake USE_PERL_FROM_PATH=1 
> > BUILD_DEBUG=optimize if test ! -d Linux; then mkdir Linux; fi;
> > /usr/bin/perl buildnum.pl -p Linux
> > NSOS_RELEASE is: 2.6
> > /usr/bin/perl pumpkin.pl 120 pumpkin.dat
> > The components are up to date
> >
> >
> > ==== Starting LDAP Server ==========
> >
> > gmake BUILD_OPT=1 NO_JAVA=1  nsCommon
> > gmake[1]: Entering directory 
> > `/root/Desktop/dsbuild-static/ds/ldapserver'
> >
> > -------------------------- SNIP Make Spam
> >
> > .o 
> > ../../../built/Linux-domestic-optimize-normal-slapd/servers/obj/main.o   
> > -L../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server
>
> > -lslapd -lldapu 
> > -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lssl3 
> > -lnss3 -lsoftokn3 -L../../../../mozilla/dist/lib -lssldap50 -lldap50 
> > -lprldap50 
> > -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lplc4 
> > -lplds4 -lnspr4  
> > -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -ldbm 
> > -lavl -lldif -llitekey  -ldl  
> > -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib 
> > -lsvrcore -L../../../../cyrus-sasl-2.1.20/lib -lsasl2 
> > -L/usr/kerberos/lib -lgssapi_krb5 -lcrypt -lpthread  
> > -L../../../../db-4.2.52.NC/built/.libs -ldb-4.2
> > /usr/bin/ld: cannot find -lsasl2
> > collect2: ld returned 1 exit status
> > gmake[3]: *** 
> >
> [../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server/ns-slapd]
>
> > Error 1
> > gmake[3]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers/slapd'
> > gmake[2]: *** [_slapd] Error 2
> > gmake[2]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers'
> > gmake[1]: *** [ldapprogs] Error 2
> > gmake[1]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/ldapserver/ldap'
> > gmake: *** [buildDirectory] Error 2
> > [root@genie ldapserver]# ls ../cyrus-sasl-2.1.20/lib
> > auxprop.c    client.lo  dlopen.o       Makefile.in       saslutil.o
> > auxprop.lo   client.o   external.c     md5.c             server.c
> > auxprop.o    common.c   external.lo    md5.lo            server.lo
> > canonusr.c   common.lo  external.o     md5.o             server.o
> > canonusr.lo  common.o   getaddrinfo.c  NTMakefile        seterror.c
> > canonusr.o   config.c   getnameinfo.c  plugin_common.lo  seterror.lo
> > checkpw.c    config.lo  getsubopt.c    plugin_common.o   seterror.o
> > checkpw.lo   config.o   libsasl2.la    saslint.h         snprintf.c
> > checkpw.o    dlopen.c   Makefile       saslutil.c        staticopen.h
> > client.c     dlopen.lo  Makefile.am    saslutil.lo       windlopen.c
> > [root@genie ldapserver]#                            -- 
> > Fedora-directory-users mailing list
> > Fedora-directory-users(a)redhat.com
> > https://www.redhat.com/mailman/listinfo/fedora-directory-users
>
>
> ------------------------------------------------------------------------
>
> --
> Fedora-directory-users mailing list
> Fedora-directory-users(a)redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-directory-users
>   
>

[Rob Crittenden]

Your configure options are wrong, I'm surprised it didn't complain about it.

You don't have a space between the directory in --enable-gssapi and 
--enable-static.

Do a: gmake distclean in the cyrus-sasl directory and re-do the 
configure and make again.

rob

Richard Megginson wrote:
>  There is still no libsasl2.a.  I'm not sure what the problem is. 
> Try 
>  using "make" instead of "gmake" - perhaps gmake is slightly different
> on 
>  your OS/version?
>  
>  Jason Kullo Sam wrote:
>  
> > Ok...guess I have to get this build going after all. Getting halfway 
> > through the make, then failing with the following error. Doh!
> >
> > Attacked the cyrus install again. Did a make clean, then changed my 
> > mind and deleted entire folder and started all over with it. For some 
> > reason, the sasl make seemed to go this time(maybe I just needed to 
> > blow the folder out last time)...but, the make on ldapserver still 
> > failed. See below for log(snipped out bits of spam...) On the bright 
> > side...I'm actually learning lots! =D
> > ====================================================================
> > [root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf -
> > tar: Read 2048 bytes from -
> > [root@genie ds]# cd cyrus-sasl-2.1.20
> > [root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure 
> > --enable-gssapi=/usr/kerberos/include/--enable-static --without-des 
> > --without-openssl
> > configure: creating cache ./config.cache
> > checking build system type... i686-pc-linux-gnu
> > checking host system type... i686-pc-linux-gnu
> > checking target system type... i686-pc-linux-gnu
> > -------------------- SNIP Successful Config
> > updating cache .././config.cache
> > configure: creating ./config.status
> > config.status: creating Makefile
> > config.status: creating saslauthd.h
> > config.status: executing depfiles commands
> > Configuration Complete. Type 'make' to build.
> > [root@genie cyrus-sasl-2.1.20]#
> > ##########################
> > Onto the make...
> > ##########################
> >
> > Configuration Complete. Type 'make' to build.
> > [root@genie cyrus-sasl-2.1.20]# gmake
> > gmake  all-recursive
> > gmake[1]: Entering directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> > Making all in include
> > gmake[2]: Entering directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
> > if gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -W -O2 -MT makemd5.o -MD 
> > -MP -MF ".deps/makemd5.Tpo" \
> >  -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \
> > then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \
> > else rm -f ".deps/makemd5.Tpo"; exit 1; \
> > fi
> > /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o makemd5  
> > makemd5.o  -lresolv
> > mkdir .libs
> >
> > ------------------- SNIP Make spam ----------------------------
> >
> > if gcc -DHAVE_CONFIG_H 
> > -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. 
> > -I. -I.. -I. -I. -I. -I./include -I./include -I./../include    -O2 -MT 
> > saslauthd-main.o -MD -MP -MF ".deps/saslauthd-main.Tpo" \
> >  -c -o saslauthd-main.o `test -f 'saslauthd-main.c' || echo 
> > './'`saslauthd-main.c; \
> > then mv ".deps/saslauthd-main.Tpo" ".deps/saslauthd-main.Po"; \
> > else rm -f ".deps/saslauthd-main.Tpo"; exit 1; \
> > fi
> > if gcc -DHAVE_CONFIG_H 
> > -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. 
> > -I. -I.. -I. -I. -I. -I./include -I./include -I./../include    -O2 -MT 
> > md5.o -MD -MP -MF ".deps/md5.Tpo" \
> >  -c -o md5.o `test -f 'md5.c' || echo './'`md5.c; \
> > then mv ".deps/md5.Tpo" ".deps/md5.Po"; \
> > else rm -f ".deps/md5.Tpo"; exit 1; \
> > fi
> > gcc  -O2   -o saslauthd  mechanisms.o auth_dce.o auth_getpwent.o 
> > auth_krb5.o auth_krb4.o auth_pam.o auth_rimap.o auth_shadow.o 
> > auth_sia.o auth_sasldb.o lak.o auth_ldap.o cache.o utils.o ipc_unix.o 
> > ipc_doors.o saslauthd-main.o md5.o -lcrypt -lresolv      -lresolv
> > gmake[3]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd'
> > gmake[2]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/saslauthd'
> > gmake[2]: Entering directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> > gmake[2]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> > gmake[1]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> > [root@genie cyrus-sasl-2.1.20]#      
> > #######################################
> > Seems to have compiled right that time for some reason...weird...
> > #######################################
> >  
> > [root@genie cyrus-sasl-2.1.20]# cd ..
> > [root@genie ds]# ls
> > 09.23                              icu-2.4.tgz
> > 09.27                              ldapserver
> > cyrus-sasl-2.1.20                  mozilla
> > cyrus-sasl-2.1.20.tar.gz           mozilla-components.tar.gz
> > db-4.2.52.NC                       net-snmp-5.2.1
> > db-4.2.52.NC.tar.gz                net-snmp-5.2.1.tar.gz
> > fedora-adminutil-devel-7.1         patch.4.2.52.1
> > fedora-adminutil-devel-7.1.tar.gz  patch.4.2.52.2
> > fedora-setuputil-devel-7.1         patch.4.2.52.3
> > fedora-setuputil-devel-7.1.tar.gz  patch.4.2.52.4
> > icu
> > [root@genie ds]# cd ldapserver/
> > [root@genie ldapserver]# gmake USE_PERL_FROM_PATH=1 
> > BUILD_DEBUG=optimize if test ! -d Linux; then mkdir Linux; fi;
> > /usr/bin/perl buildnum.pl -p Linux
> > NSOS_RELEASE is: 2.6
> > /usr/bin/perl pumpkin.pl 120 pumpkin.dat
> > The components are up to date
> >
> >
> > ==== Starting LDAP Server ==========
> >
> > gmake BUILD_OPT=1 NO_JAVA=1  nsCommon
> > gmake[1]: Entering directory `/root/Desktop/dsbuild-static/ds/ldapserver'
> >
> > -------------------------- SNIP Make Spam
> >
> > .o 
> > ../../../built/Linux-domestic-optimize-normal-slapd/servers/obj/main.o   
> > -L../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server
>
> > -lslapd -lldapu 
> > -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lssl3 
> > -lnss3 -lsoftokn3 -L../../../../mozilla/dist/lib -lssldap50 -lldap50 
> > -lprldap50 
> > -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -lplc4 
> > -lplds4 -lnspr4  
> > -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib -ldbm 
> > -lavl -lldif -llitekey  -ldl  
> > -L../../../../mozilla/dist/Linux2.6_x86_glibc_PTH_OPT.OBJ/lib 
> > -lsvrcore -L../../../../cyrus-sasl-2.1.20/lib -lsasl2 
> > -L/usr/kerberos/lib -lgssapi_krb5 -lcrypt -lpthread  
> > -L../../../../db-4.2.52.NC/built/.libs -ldb-4.2
> > /usr/bin/ld: cannot find -lsasl2
> > collect2: ld returned 1 exit status
> > gmake[3]: *** 
> >
> [../../../built/release/slapd/Linux-domestic-optimize-normal-slapd/bin/slapd/server/ns-slapd]
>
> > Error 1
> > gmake[3]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers/slapd'
> > gmake[2]: *** [_slapd] Error 2
> > gmake[2]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/ldapserver/ldap/servers'
> > gmake[1]: *** [ldapprogs] Error 2
> > gmake[1]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/ldapserver/ldap'
> > gmake: *** [buildDirectory] Error 2
> > [root@genie ldapserver]# ls ../cyrus-sasl-2.1.20/lib
> > auxprop.c    client.lo  dlopen.o       Makefile.in       saslutil.o
> > auxprop.lo   client.o   external.c     md5.c             server.c
> > auxprop.o    common.c   external.lo    md5.lo            server.lo
> > canonusr.c   common.lo  external.o     md5.o             server.o
> > canonusr.lo  common.o   getaddrinfo.c  NTMakefile        seterror.c
> > canonusr.o   config.c   getnameinfo.c  plugin_common.lo  seterror.lo
> > checkpw.c    config.lo  getsubopt.c    plugin_common.o   seterror.o
> > checkpw.lo   config.o   libsasl2.la    saslint.h         snprintf.c
> > checkpw.o    dlopen.c   Makefile       saslutil.c        staticopen.h
> > client.c     dlopen.lo  Makefile.am    saslutil.lo       windlopen.c
> > [root@genie ldapserver]#                            -- 
> > Fedora-directory-users mailing list
> > Fedora-directory-users(a)redhat.com
> > https://www.redhat.com/mailman/listinfo/fedora-directory-users
>  
>  
>  
>  ------------------------------------------------------------------------
>  
>  --
>  Fedora-directory-users mailing list
>  Fedora-directory-users(a)redhat.com
>  https://www.redhat.com/mailman/listinfo/fedora-directory-users

[Jason Kullo Sam]

Noriko Hosoi wrote:

>  My cyrus sasl build creates a symbolic link to the lib directory like
>
>  this.  Do you see it in your build log?
>
> > [...]
> > adding static plugins and dependencies
> > ar cru .libs/libsasl2.a ../plugins/sasldb.o ../sasldb/db_berkeley.o 
> > ../sasldb/allockey.o ../plugins/cram.o ../plugins/digestmd5.o 
> > ../plugins/gssapi.o ../plugins/plain.o ../plugins/anonymous.o
> > rm -f libsasl2.a
> > *ln -s .libs/libsasl2.a libsasl2.a*
> > gmake[2]: Leaving directory `/work/cyrus-sasl-2.1.20/lib'
>
>
>  --noriko
>
>  Richard Megginson wrote:
>
> > There is still no libsasl2.a.  I'm not sure what the problem is.  Try 
> > using "make" instead of "gmake" - perhaps gmake is slightly
> different 
> > on your OS/version?
> > 
===========================
Answering both of these...
I cleaned and blew up the directory again, and started over. Even fixed 
a typo in the configure portion(apparently this typo allowed it to 
finish before). The configureation was done, but the make failed. It 
doesn't look like it ever even MAKES the libsasl2.a, nevermind links it...

Here's the whole shabang in case my noobness is leaving something 
important out...
=================================================================
[root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf -
tar: Read 2048 bytes from -
[root@genie ds]# cd cyrus-sasl-2.1.20
[root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure 
--enable-gssapi=/usr/kerberos/include/ --enable-static --without-des 
--without-openssl
configure: creating cache ./config.cache
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for gawk... (cached) gawk
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for __attribute__... yes
checking for runpath switch... -Wl,-rpath,
checking for ranlib... ranlib
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD-compatible nm... /usr/bin/nm -B
updating cache ./config.cache
loading cache ./config.cache within ltconfig
checking for object suffix... o
checking for executable suffix... (cached)
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.lo... yes
checking if gcc supports -fno-rtti -fno-exceptions ... no
checking if gcc static flag -static works... -static
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/bin/ld option to reload object files... -r
checking dynamic linker characteristics... Linux ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
updating cache ./config.cache
configure: loading cache ./config.cache
checking for connect... yes
checking for res_search... no
checking for res_search in -lresolv... yes
checking for dn_expand... yes
checking for dns_lookup... no
checking DB path to use... /etc/sasldb2
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking db.h usability... no
checking db.h presence... no
checking for db.h... no
checking ndbm.h usability... no
checking ndbm.h presence... no
checking for ndbm.h... no
checking gdbm.h usability... no
checking gdbm.h presence... no
checking for gdbm.h... no
checking DB library to use... no
configure: WARNING: Disabling SASL authentication database support
checking for dlopen in -ldl... yes
checking /dev/random to use... /dev/random
checking for nm... /usr/bin/nm -B
checking for underscore before symbols... no
checking for syslog... yes
checking for pam_start in -lpam... no
checking if I should include saslauthd... /var/state/saslauthd
checking to include Courier authdaemond support... /dev/null
checking if I should include pwcheck... no
checking if I should include the alwaystrue verifier... no
checking if we should enable sasl_checkapop... enabled
checking CRAM-MD5... enabled
checking for OpenSSL... no
configure: WARNING: No DES support for DIGEST-MD5
checking DIGEST-MD5... enabled
configure: WARNING: OpenSSL not found -- OTP will be disabled
checking OTP... disabled
configure: WARNING: OpenSSL not found -- SRP will be disabled
checking SRP... disabled
checking KERBEROS_V4... disabled
checking for crypt... no
checking for crypt in -lcrypt... yes
checking gssapi.h usability... no
checking gssapi.h presence... no
checking for gssapi.h... no
checking gssapi/gssapi.h usability... no
checking gssapi/gssapi.h presence... no
checking for gssapi/gssapi.h... no
configure: WARNING: Disabling GSSAPI - no include files found
checking GSSAPI... disabled
checking PLAIN... enabled
checking ANONYMOUS... enabled
checking LOGIN... disabled
configure: WARNING: OpenSSL not found -- NTLM will be disabled
checking NTLM... disabled
checking SQL... disabled
checking for dmalloc library... no
checking for sfio library... no
checking for getsubopt... yes
checking for snprintf... yes
checking for vsnprintf... yes
checking for inet_aton in -lresolv... yes
checking for getaddrinfo... yes
checking for gai_strerror... yes
checking for getnameinfo... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for mode_t... yes
checking for pid_t... yes
checking return type of signal handlers... void
checking whether time.h and sys/time.h may both be included... yes
checking for ANSI C header files... (cached) yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for sys/wait.h that is POSIX.1 compatible... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking paths.h usability... yes
checking paths.h presence... yes
checking for paths.h... yes
checking for strings.h... (cached) yes
checking sys/file.h usability... yes
checking sys/file.h presence... yes
checking for sys/file.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for inttypes.h... (cached) yes
checking sys/uio.h usability... yes
checking sys/uio.h presence... yes
checking for sys/uio.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sysexits.h usability... yes
checking sysexits.h presence... yes
checking for sysexits.h... yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking varargs.h usability... no
checking varargs.h presence... no
checking for varargs.h... no
checking whether you have ss_family in struct sockaddr_storage... yes
checking whether you have sa_len in struct sockaddr... no
checking for socklen_t... yes
checking for gethostname... yes
checking for getdomainname... yes
checking for getpwnam... yes
checking for getspnam... yes
checking for gettimeofday... yes
checking for inet_aton... yes
checking for memcpy... yes
checking for mkdir... yes
checking for select... yes
checking for socket... yes
checking for strchr... yes
checking for strdup... yes
checking for strerror... yes
checking for strspn... yes
checking for strstr... yes
checking for strtol... yes
checking for jrand48... yes
updating cache ./config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: creating include/Makefile
config.status: creating sasldb/Makefile
config.status: creating plugins/Makefile
config.status: creating lib/Makefile
config.status: creating utils/Makefile
config.status: creating doc/Makefile
config.status: creating sample/Makefile
config.status: creating java/Makefile
config.status: creating java/CyrusSasl/Makefile
config.status: creating java/Test/Makefile
config.status: creating java/javax/Makefile
config.status: creating java/javax/security/Makefile
config.status: creating java/javax/security/auth/Makefile
config.status: creating java/javax/security/auth/callback/Makefile
config.status: creating pwcheck/Makefile
config.status: creating man/Makefile
config.status: creating config.h
config.status: executing depfiles commands
configure: configuring in saslauthd
configure: running /bin/sh './configure' --prefix=/usr/local  
'--enable-gssapi=/usr/kerberos/include/' '--enable-static' 
'--without-des' '--without-openssl' 'CFLAGS=-O2' 
--cache-file=.././config.cache --srcdir=.
configure: loading cache .././config.cache
checking build system type... (cached) i686-pc-linux-gnu
checking host system type... (cached) i686-pc-linux-gnu
checking for a BSD-compatible install... (cached) /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... (cached) gawk
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... (cached) gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... (cached) o
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking for style of include used by make... GNU
checking dependency style of gcc... (cached) gcc3
checking how to run the C preprocessor... (cached) gcc -E
checking for gawk... (cached) gawk
checking whether make sets $(MAKE)... (cached) yes
checking whether ln -s works... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for __attribute__... (cached) yes
checking for runpath switch... -Wl,-rpath,
checking for connect... (cached) yes
checking for res_search... (cached) no
checking for res_search in -lresolv... (cached) yes
checking for dn_expand... (cached) yes
checking for dns_lookup... (cached) no
checking for egrep... (cached) grep -E
checking for ANSI C header files... (cached) yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for memory.h... (cached) yes
checking for strings.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for unistd.h... (cached) yes
checking for OpenSSL... no
checking KERBEROS_V4... disabled
checking for crypt... (cached) no
checking for crypt in -lcrypt... (cached) yes
checking for gssapi.h... (cached) no
checking for gssapi/gssapi.h... (cached) no
configure: WARNING: Disabling GSSAPI - no include files found
checking GSSAPI... disabled
checking for crypt... (cached) no
checking for crypt in -lcrypt... (cached) yes
checking for pam_start in -lpam... (cached) no
checking for PAM support... no
checking for inet_aton in -lresolv... (cached) yes
checking to include LDAP support... no
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... (cached) yes
checking whether time.h and sys/time.h may both be included... (cached) yes
checking crypt.h usability... yes
checking crypt.h presence... yes
checking for crypt.h... yes
checking for fcntl.h... (cached) yes
checking krb5.h usability... no
checking krb5.h presence... no
checking for krb5.h... no
checking for strings.h... (cached) yes
checking for syslog.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for sys/uio.h... (cached) yes
checking for an ANSI C-conforming const... (cached) yes
checking for pid_t... (cached) yes
checking whether gcc implements __func__... yes
checking return type of signal handlers... (cached) void
checking for gethostname... (cached) yes
checking for mkdir... (cached) yes
checking for socket... (cached) yes
checking for strdup... (cached) yes
checking for getspnam... (cached) yes
checking for strlcat... no
checking for strlcpy... no
checking for getaddrinfo... (cached) yes
checking for getnameinfo... (cached) yes
checking whether you have ss_family in struct sockaddr_storage... 
(cached) yes
checking whether you have sa_len in struct sockaddr... (cached) no
checking for socklen_t... (cached) yes
updating cache .././config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: creating saslauthd.h
config.status: executing depfiles commands
Configuration Complete. Type 'make' to build.
[root@genie cyrus-sasl-2.1.20]# make
make  all-recursive
make[1]: Entering directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
Making all in include
make[2]: Entering directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
if gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -W -O2 -MT makemd5.o -MD 
-MP -MF ".deps/makemd5.Tpo" \
  -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \
then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \
else rm -f ".deps/makemd5.Tpo"; exit 1; \
fi
/bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o makemd5  
makemd5.o  -lresolv
mkdir .libs
gcc -Wall -W -O2 -o makemd5 makemd5.o -lresolv
rm -f md5global.h
./makemd5 md5global.h
make[2]: Leaving directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
Making all in sasldb
make[2]: Entering directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb'
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../include     -Wall -W -O2 -MT allockey.lo -MD -MP -MF 
".deps/allockey.Tpo" \
  -c -o allockey.lo `test -f 'allockey.c' || echo './'`allockey.c; \
then mv ".deps/allockey.Tpo" ".deps/allockey.Plo"; \
else rm -f ".deps/allockey.Tpo"; exit 1; \
fi
mkdir .libs
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W -O2 
-MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c  -fPIC 
-DPIC -o .libs/allockey.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W -O2 
-MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c -o 
allockey.o
> /dev/null 2>&1 
mv -f
.libs/allockey.lo allockey.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../include     -Wall -W -O2 -MT db_none.lo -MD -MP -MF 
".deps/db_none.Tpo" \
  -c -o db_none.lo `test -f 'db_none.c' || echo './'`db_none.c; \
then mv ".deps/db_none.Tpo" ".deps/db_none.Plo"; \
else rm -f ".deps/db_none.Tpo"; exit 1; \
fi
rm -f .libs/db_none.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W -O2 
-MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c  -fPIC -DPIC 
-o .libs/db_none.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W -O2 
-MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -o db_none.o 
> /dev/null 2>&1 
mv -f .libs/db_none.lo db_none.lo
/bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o libsasldb.la   
allockey.lo db_none.lo  -lresolv
rm -fr .libs/libsasldb.la .libs/libsasldb.* .libs/libsasldb.*
ar cru .libs/libsasldb.al allockey.lo db_none.lo
ranlib .libs/libsasldb.al
creating libsasldb.la
(cd .libs && rm -f libsasldb.la && ln -s ../libsasldb.la libsasldb.la)
ar cru .libs/libsasldb.a db_none.o
make[2]: Leaving directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb'
Making all in plugins
make[2]: Entering directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins'
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
cram.lo -MD -MP -MF ".deps/cram.Tpo" \
  -c -o cram.lo `test -f 'cram.c' || echo './'`cram.c; \
then mv ".deps/cram.Tpo" ".deps/cram.Plo"; \
else rm -f ".deps/cram.Tpo"; exit 1; \
fi
mkdir .libs
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c 
cram.c  -fPIC -DPIC -o .libs/cram.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c 
cram.c -o cram.o
> /dev/null 2>&1 
mv -f
.libs/cram.lo cram.lo
/bin/sh ./makeinit.sh
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
crammd5_init.lo -MD -MP -MF ".deps/crammd5_init.Tpo" \
  -c -o crammd5_init.lo `test -f 'crammd5_init.c' || echo 
'./'`crammd5_init.c; \
then mv ".deps/crammd5_init.Tpo" ".deps/crammd5_init.Plo"; \
else rm -f ".deps/crammd5_init.Tpo"; exit 1; \
fi
rm -f .libs/crammd5_init.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF 
.deps/crammd5_init.Tpo -c crammd5_init.c  -fPIC -DPIC -o 
.libs/crammd5_init.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF 
.deps/crammd5_init.Tpo -c crammd5_init.c -o crammd5_init.o
> /dev/null
> 2>&1 
mv -f .libs/crammd5_init.lo crammd5_init.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \
  -c -o plugin_common.lo `test -f 'plugin_common.c' || echo 
'./'`plugin_common.c; \
then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \
else rm -f ".deps/plugin_common.Tpo"; exit 1; \
fi
rm -f .libs/plugin_common.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
.deps/plugin_common.Tpo -c plugin_common.c  -fPIC -DPIC -o 
.libs/plugin_common.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
.deps/plugin_common.Tpo -c plugin_common.c -o plugin_common.o >/dev/null 
2>&1
mv -f .libs/plugin_common.lo plugin_common.lo
/bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module -export-dynamic 
-rpath /usr/lib/sasl2  -o libcrammd5.la  -version-info 2:20:0 cram.lo 
crammd5_init.lo plugin_common.lo  -lresolv
rm -fr .libs/libcrammd5.la .libs/libcrammd5.* .libs/libcrammd5.*
gcc -shared  cram.lo crammd5_init.lo plugin_common.lo  -lresolv -lc  
-Wl,-soname -Wl,libcrammd5.so.2 -o .libs/libcrammd5.so.2.0.20
(cd .libs && rm -f libcrammd5.so.2 && ln -s libcrammd5.so.2.0.20 
libcrammd5.so.2)
(cd .libs && rm -f libcrammd5.so && ln -s libcrammd5.so.2.0.20 
libcrammd5.so)
ar cru .libs/libcrammd5.a  cram.o crammd5_init.o plugin_common.o
ranlib .libs/libcrammd5.a
creating libcrammd5.la
(cd .libs && rm -f libcrammd5.la && ln -s ../libcrammd5.la libcrammd5.la)
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
digestmd5.lo -MD -MP -MF ".deps/digestmd5.Tpo" \
  -c -o digestmd5.lo `test -f 'digestmd5.c' || echo './'`digestmd5.c; \
then mv ".deps/digestmd5.Tpo" ".deps/digestmd5.Plo"; \
else rm -f ".deps/digestmd5.Tpo"; exit 1; \
fi
rm -f .libs/digestmd5.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF 
.deps/digestmd5.Tpo -c digestmd5.c  -fPIC -DPIC -o .libs/digestmd5.lo
digestmd5.c: In function `digestmd5_server_mech_step2':
digestmd5.c:2093: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
digestmd5.c:2110: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF 
.deps/digestmd5.Tpo -c digestmd5.c -o digestmd5.o
> /dev/null
> 2>&1 
mv -f .libs/digestmd5.lo digestmd5.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
digestmd5_init.lo -MD -MP -MF ".deps/digestmd5_init.Tpo" \
  -c -o digestmd5_init.lo `test -f 'digestmd5_init.c' || echo 
'./'`digestmd5_init.c; \
then mv ".deps/digestmd5_init.Tpo" ".deps/digestmd5_init.Plo"; \
else rm -f ".deps/digestmd5_init.Tpo"; exit 1; \
fi
rm -f .libs/digestmd5_init.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF 
.deps/digestmd5_init.Tpo -c digestmd5_init.c  -fPIC -DPIC -o 
.libs/digestmd5_init.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF 
.deps/digestmd5_init.Tpo -c digestmd5_init.c -o digestmd5_init.o 
> /dev/null 2>&1 
mv -f .libs/digestmd5_init.lo
digestmd5_init.lo
/bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module -export-dynamic 
-rpath /usr/lib/sasl2  -o libdigestmd5.la  -version-info 2:20:0 
digestmd5.lo digestmd5_init.lo plugin_common.lo  -lresolv   -lresolv
rm -fr .libs/libdigestmd5.la .libs/libdigestmd5.* .libs/libdigestmd5.*
gcc -shared  digestmd5.lo digestmd5_init.lo plugin_common.lo  -lresolv 
-lresolv -lc  -Wl,-soname -Wl,libdigestmd5.so.2 -o 
.libs/libdigestmd5.so.2.0.20
(cd .libs && rm -f libdigestmd5.so.2 && ln -s libdigestmd5.so.2.0.20 
libdigestmd5.so.2)
(cd .libs && rm -f libdigestmd5.so && ln -s libdigestmd5.so.2.0.20 
libdigestmd5.so)
ar cru .libs/libdigestmd5.a  digestmd5.o digestmd5_init.o plugin_common.o
ranlib .libs/libdigestmd5.a
creating libdigestmd5.la
(cd .libs && rm -f libdigestmd5.la && ln -s ../libdigestmd5.la 
libdigestmd5.la)
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
plain.lo -MD -MP -MF ".deps/plain.Tpo" \
  -c -o plain.lo `test -f 'plain.c' || echo './'`plain.c; \
then mv ".deps/plain.Tpo" ".deps/plain.Plo"; \
else rm -f ".deps/plain.Tpo"; exit 1; \
fi
rm -f .libs/plain.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo -c 
plain.c  -fPIC -DPIC -o .libs/plain.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo -c 
plain.c -o plain.o
> /dev/null 2>&1 
mv -f
.libs/plain.lo plain.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
plain_init.lo -MD -MP -MF ".deps/plain_init.Tpo" \
  -c -o plain_init.lo `test -f 'plain_init.c' || echo './'`plain_init.c;
\
then mv ".deps/plain_init.Tpo" ".deps/plain_init.Plo"; \
else rm -f ".deps/plain_init.Tpo"; exit 1; \
fi
rm -f .libs/plain_init.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF 
.deps/plain_init.Tpo -c plain_init.c  -fPIC -DPIC -o .libs/plain_init.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF 
.deps/plain_init.Tpo -c plain_init.c -o plain_init.o
> /dev/null
> 2>&1 
mv -f .libs/plain_init.lo plain_init.lo
/bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module -export-dynamic 
-rpath /usr/lib/sasl2  -o libplain.la  -version-info 2:20:0 plain.lo 
plain_init.lo plugin_common.lo -lcrypt  -lresolv
rm -fr .libs/libplain.la .libs/libplain.* .libs/libplain.*
gcc -shared  plain.lo plain_init.lo plugin_common.lo  -lcrypt -lresolv 
-lc  -Wl,-soname -Wl,libplain.so.2 -o .libs/libplain.so.2.0.20
(cd .libs && rm -f libplain.so.2 && ln -s libplain.so.2.0.20
libplain.so.2)
(cd .libs && rm -f libplain.so && ln -s libplain.so.2.0.20 libplain.so)
ar cru .libs/libplain.a  plain.o plain_init.o plugin_common.o
ranlib .libs/libplain.a
creating libplain.la
(cd .libs && rm -f libplain.la && ln -s ../libplain.la libplain.la)
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
anonymous.lo -MD -MP -MF ".deps/anonymous.Tpo" \
  -c -o anonymous.lo `test -f 'anonymous.c' || echo './'`anonymous.c; \
then mv ".deps/anonymous.Tpo" ".deps/anonymous.Plo"; \
else rm -f ".deps/anonymous.Tpo"; exit 1; \
fi
rm -f .libs/anonymous.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF 
.deps/anonymous.Tpo -c anonymous.c  -fPIC -DPIC -o .libs/anonymous.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF 
.deps/anonymous.Tpo -c anonymous.c -o anonymous.o
> /dev/null
> 2>&1 
mv -f .libs/anonymous.lo anonymous.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
anonymous_init.lo -MD -MP -MF ".deps/anonymous_init.Tpo" \
  -c -o anonymous_init.lo `test -f 'anonymous_init.c' || echo 
'./'`anonymous_init.c; \
then mv ".deps/anonymous_init.Tpo" ".deps/anonymous_init.Plo"; \
else rm -f ".deps/anonymous_init.Tpo"; exit 1; \
fi
rm -f .libs/anonymous_init.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF 
.deps/anonymous_init.Tpo -c anonymous_init.c  -fPIC -DPIC -o 
.libs/anonymous_init.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
-I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF 
.deps/anonymous_init.Tpo -c anonymous_init.c -o anonymous_init.o 
> /dev/null 2>&1 
mv -f .libs/anonymous_init.lo
anonymous_init.lo
/bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module -export-dynamic 
-rpath /usr/lib/sasl2  -o libanonymous.la  -version-info 2:20:0 
anonymous.lo anonymous_init.lo plugin_common.lo  -lresolv
rm -fr .libs/libanonymous.la .libs/libanonymous.* .libs/libanonymous.*
gcc -shared  anonymous.lo anonymous_init.lo plugin_common.lo  -lresolv 
-lc  -Wl,-soname -Wl,libanonymous.so.2 -o .libs/libanonymous.so.2.0.20
(cd .libs && rm -f libanonymous.so.2 && ln -s libanonymous.so.2.0.20 
libanonymous.so.2)
(cd .libs && rm -f libanonymous.so && ln -s libanonymous.so.2.0.20 
libanonymous.so)
ar cru .libs/libanonymous.a  anonymous.o anonymous_init.o plugin_common.o
ranlib .libs/libanonymous.a
creating libanonymous.la
(cd .libs && rm -f libanonymous.la && ln -s ../libanonymous.la 
libanonymous.la)
make[2]: Leaving directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins'
Making all in lib
make[2]: Entering directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib'
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT auxprop.lo 
-MD -MP -MF ".deps/auxprop.Tpo" \
  -c -o auxprop.lo `test -f 'auxprop.c' || echo './'`auxprop.c; \
then mv ".deps/auxprop.Tpo" ".deps/auxprop.Plo"; \
else rm -f ".deps/auxprop.Tpo"; exit 1; \
fi
mkdir .libs
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT auxprop.lo -MD -MP -MF .deps/auxprop.Tpo -c auxprop.c  
-fPIC -DPIC -o .libs/auxprop.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT auxprop.lo -MD -MP -MF .deps/auxprop.Tpo -c auxprop.c 
-o auxprop.o
> /dev/null 2>&1 
mv -f
.libs/auxprop.lo auxprop.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT canonusr.lo 
-MD -MP -MF ".deps/canonusr.Tpo" \
  -c -o canonusr.lo `test -f 'canonusr.c' || echo './'`canonusr.c; \
then mv ".deps/canonusr.Tpo" ".deps/canonusr.Plo"; \
else rm -f ".deps/canonusr.Tpo"; exit 1; \
fi
rm -f .libs/canonusr.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT canonusr.lo -MD -MP -MF .deps/canonusr.Tpo -c 
canonusr.c  -fPIC -DPIC -o .libs/canonusr.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT canonusr.lo -MD -MP -MF .deps/canonusr.Tpo -c 
canonusr.c -o canonusr.o
> /dev/null 2>&1 
mv -f
.libs/canonusr.lo canonusr.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT checkpw.lo 
-MD -MP -MF ".deps/checkpw.Tpo" \
  -c -o checkpw.lo `test -f 'checkpw.c' || echo './'`checkpw.c; \
then mv ".deps/checkpw.Tpo" ".deps/checkpw.Plo"; \
else rm -f ".deps/checkpw.Tpo"; exit 1; \
fi
rm -f .libs/checkpw.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT checkpw.lo -MD -MP -MF .deps/checkpw.Tpo -c checkpw.c  
-fPIC -DPIC -o .libs/checkpw.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT checkpw.lo -MD -MP -MF .deps/checkpw.Tpo -c checkpw.c 
-o checkpw.o
> /dev/null 2>&1 
mv -f
.libs/checkpw.lo checkpw.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT client.lo -MD 
-MP -MF ".deps/client.Tpo" \
  -c -o client.lo `test -f 'client.c' || echo './'`client.c; \
then mv ".deps/client.Tpo" ".deps/client.Plo"; \
else rm -f ".deps/client.Tpo"; exit 1; \
fi
rm -f .libs/client.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo -c client.c  
-fPIC -DPIC -o .libs/client.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo -c client.c -o 
client.o
> /dev/null 2>&1 
mv -f
.libs/client.lo client.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT common.lo -MD 
-MP -MF ".deps/common.Tpo" \
  -c -o common.lo `test -f 'common.c' || echo './'`common.c; \
then mv ".deps/common.Tpo" ".deps/common.Plo"; \
else rm -f ".deps/common.Tpo"; exit 1; \
fi
rm -f .libs/common.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo -c common.c  
-fPIC -DPIC -o .libs/common.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo -c common.c -o 
common.o
> /dev/null 2>&1 
mv -f
.libs/common.lo common.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT config.lo -MD 
-MP -MF ".deps/config.Tpo" \
  -c -o config.lo `test -f 'config.c' || echo './'`config.c; \
then mv ".deps/config.Tpo" ".deps/config.Plo"; \
else rm -f ".deps/config.Tpo"; exit 1; \
fi
rm -f .libs/config.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo -c config.c  
-fPIC -DPIC -o .libs/config.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo -c config.c -o 
config.o
> /dev/null 2>&1 
mv -f
.libs/config.lo config.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT external.lo 
-MD -MP -MF ".deps/external.Tpo" \
  -c -o external.lo `test -f 'external.c' || echo './'`external.c; \
then mv ".deps/external.Tpo" ".deps/external.Plo"; \
else rm -f ".deps/external.Tpo"; exit 1; \
fi
rm -f .libs/external.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT external.lo -MD -MP -MF .deps/external.Tpo -c 
external.c  -fPIC -DPIC -o .libs/external.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT external.lo -MD -MP -MF .deps/external.Tpo -c 
external.c -o external.o
> /dev/null 2>&1 
mv -f
.libs/external.lo external.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT md5.lo -MD 
-MP -MF ".deps/md5.Tpo" \
  -c -o md5.lo `test -f 'md5.c' || echo './'`md5.c; \
then mv ".deps/md5.Tpo" ".deps/md5.Plo"; \
else rm -f ".deps/md5.Tpo"; exit 1; \
fi
rm -f .libs/md5.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c md5.c  -fPIC -DPIC 
-o .libs/md5.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c md5.c -o md5.o 
> /dev/null 2>&1 
mv -f .libs/md5.lo md5.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT saslutil.lo 
-MD -MP -MF ".deps/saslutil.Tpo" \
  -c -o saslutil.lo `test -f 'saslutil.c' || echo './'`saslutil.c; \
then mv ".deps/saslutil.Tpo" ".deps/saslutil.Plo"; \
else rm -f ".deps/saslutil.Tpo"; exit 1; \
fi
rm -f .libs/saslutil.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT saslutil.lo -MD -MP -MF .deps/saslutil.Tpo -c 
saslutil.c  -fPIC -DPIC -o .libs/saslutil.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT saslutil.lo -MD -MP -MF .deps/saslutil.Tpo -c 
saslutil.c -o saslutil.o
> /dev/null 2>&1 
mv -f
.libs/saslutil.lo saslutil.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT server.lo -MD 
-MP -MF ".deps/server.Tpo" \
  -c -o server.lo `test -f 'server.c' || echo './'`server.c; \
then mv ".deps/server.Tpo" ".deps/server.Plo"; \
else rm -f ".deps/server.Tpo"; exit 1; \
fi
rm -f .libs/server.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo -c server.c  
-fPIC -DPIC -o .libs/server.lo
server.c: In function `sasl_setpass':
server.c:151: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
server.c: In function `sasl_server_start':
server.c:1245: warning: dereferencing type-punned pointer will break 
strict-aliasing rules
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo -c server.c -o 
server.o
> /dev/null 2>&1 
mv -f
.libs/server.lo server.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT seterror.lo 
-MD -MP -MF ".deps/seterror.Tpo" \
  -c -o seterror.lo `test -f 'seterror.c' || echo './'`seterror.c; \
then mv ".deps/seterror.Tpo" ".deps/seterror.Plo"; \
else rm -f ".deps/seterror.Tpo"; exit 1; \
fi
rm -f .libs/seterror.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT seterror.lo -MD -MP -MF .deps/seterror.Tpo -c 
seterror.c  -fPIC -DPIC -o .libs/seterror.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT seterror.lo -MD -MP -MF .deps/seterror.Tpo -c 
seterror.c -o seterror.o
> /dev/null 2>&1 
mv -f
.libs/seterror.lo seterror.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT dlopen.lo -MD 
-MP -MF ".deps/dlopen.Tpo" \
  -c -o dlopen.lo `test -f 'dlopen.c' || echo './'`dlopen.c; \
then mv ".deps/dlopen.Tpo" ".deps/dlopen.Plo"; \
else rm -f ".deps/dlopen.Tpo"; exit 1; \
fi
rm -f .libs/dlopen.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo -c dlopen.c  
-fPIC -DPIC -o .libs/dlopen.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo -c dlopen.c -o 
dlopen.o
> /dev/null 2>&1 
mv -f
.libs/dlopen.lo dlopen.lo
if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
-I../include -I../plugins -I../include    -Wall -W -O2 -MT 
plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \
  -c -o plugin_common.lo `test -f '../plugins/plugin_common.c' || echo 
'./'`../plugins/plugin_common.c; \
then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \
else rm -f ".deps/plugin_common.Tpo"; exit 1; \
fi
rm -f .libs/plugin_common.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT plugin_common.lo -MD -MP -MF .deps/plugin_common.Tpo -c 
../plugins/plugin_common.c  -fPIC -DPIC -o .libs/plugin_common.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
-Wall -W -O2 -MT plugin_common.lo -MD -MP -MF .deps/plugin_common.Tpo -c 
../plugins/plugin_common.c -o plugin_common.o
> /dev/null
> 2>&1 
mv -f .libs/plugin_common.lo plugin_common.lo
/bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o libsasl2.la -rpath 
/usr/local/lib -version-info 2:20:0 auxprop.lo canonusr.lo checkpw.lo 
client.lo common.lo config.lo external.lo md5.lo saslutil.lo server.lo 
seterror.lo dlopen.lo plugin_common.lo   -ldl -lresolv   -lresolv
rm -fr .libs/libsasl2.la .libs/libsasl2.* .libs/libsasl2.*
gcc -shared  auxprop.lo canonusr.lo checkpw.lo client.lo common.lo 
config.lo external.lo md5.lo saslutil.lo server.lo seterror.lo dlopen.lo 
plugin_common.lo  -ldl -lresolv -lresolv -lc  -Wl,-soname 
-Wl,libsasl2.so.2 -o .libs/libsasl2.so.2.0.20
(cd .libs && rm -f libsasl2.so.2 && ln -s libsasl2.so.2.0.20
libsasl2.so.2)
(cd .libs && rm -f libsasl2.so && ln -s libsasl2.so.2.0.20 libsasl2.so)
ar cru .libs/libsasl2.a  auxprop.o canonusr.o checkpw.o client.o 
common.o config.o external.o md5.o saslutil.o server.o seterror.o 
dlopen.o plugin_common.o
ranlib .libs/libsasl2.a
creating libsasl2.la
(cd .libs && rm -f libsasl2.la && ln -s ../libsasl2.la libsasl2.la)
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
-I../include    -Wall -W -O2 -MT ../plugins/sasldb.o -MD -MP -MF 
".deps/../plugins/sasldb.Tpo" \
  -c -o ../plugins/sasldb.o `test -f '../plugins/sasldb.c' || echo 
'./'`../plugins/sasldb.c; \
then mv ".deps/../plugins/sasldb.Tpo" ".deps/../plugins/sasldb.Po"; \
else rm -f ".deps/../plugins/sasldb.Tpo"; exit 1; \
fi
../plugins/sasldb.c:129: fatal error: opening dependency file 
.deps/../plugins/sasldb.Tpo: No such file or directory
compilation terminated.
make[2]: *** [../plugins/sasldb.o] Error 1
make[2]: Leaving directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory 
`/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
make: *** [all] Error 2
[root@genie cyrus-sasl-2.1.20]#

[Rob Crittenden]

This info was great, thanks.

My FC3 box is offline right now but I re-made my cyrus-sasl in RHEL 3 
and I noticed a few differences.

One is when configure is checking for database support (db, ndbm, etc). 
It is found for me, not for you.

Can you try installing db4-devel-4.1.25-8.1 (or whatever the equivalent 
is on FC3)?

Another difference I saw is in pam_start in -lpam. I don't know if this 
is anything to worry about or not.

rob

Jason Kullo Sam wrote:
>  Noriko Hosoi wrote:
>  
> > My cyrus sasl build creates a symbolic link to the lib directory like 
> > this.  Do you see it in your build log?
> >
> >> [...]
> >> adding static plugins and dependencies
> >> ar cru .libs/libsasl2.a ../plugins/sasldb.o ../sasldb/db_berkeley.o 
> >> ../sasldb/allockey.o ../plugins/cram.o ../plugins/digestmd5.o 
> >> ../plugins/gssapi.o ../plugins/plain.o ../plugins/anonymous.o
> >> rm -f libsasl2.a
> >> *ln -s .libs/libsasl2.a libsasl2.a*
> >> gmake[2]: Leaving directory `/work/cyrus-sasl-2.1.20/lib'
> >
> >
> >
> > --noriko
> >
> > Richard Megginson wrote:
> >
> >> There is still no libsasl2.a.  I'm not sure what the problem is.  Try 
> >> using "make" instead of "gmake" - perhaps gmake is slightly
> different 
> >> on your OS/version?
> >>
>  ===========================
>  Answering both of these...
>  I cleaned and blew up the directory again, and started over. Even fixed 
>  a typo in the configure portion(apparently this typo allowed it to 
>  finish before). The configureation was done, but the make failed. It 
>  doesn't look like it ever even MAKES the libsasl2.a, nevermind links it...
>  
>  Here's the whole shabang in case my noobness is leaving something 
>  important out...
>  =================================================================
>  [root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf -
>  tar: Read 2048 bytes from -
>  [root@genie ds]# cd cyrus-sasl-2.1.20
>  [root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure 
>  --enable-gssapi=/usr/kerberos/include/ --enable-static --without-des 
>  --without-openssl
>  configure: creating cache ./config.cache
>  checking build system type... i686-pc-linux-gnu
>  checking host system type... i686-pc-linux-gnu
>  checking target system type... i686-pc-linux-gnu
>  checking for a BSD-compatible install... /usr/bin/install -c
>  checking whether build environment is sane... yes
>  checking for gawk... gawk
>  checking whether make sets $(MAKE)... yes
>  checking for gcc... gcc
>  checking for C compiler default output... a.out
>  checking whether the C compiler works... yes
>  checking whether we are cross compiling... no
>  checking for suffix of executables...
>  checking for suffix of object files... o
>  checking whether we are using the GNU C compiler... yes
>  checking whether gcc accepts -g... yes
>  checking for gcc option to accept ANSI C... none needed
>  checking for style of include used by make... GNU
>  checking dependency style of gcc... gcc3
>  checking how to run the C preprocessor... gcc -E
>  checking for gawk... (cached) gawk
>  checking whether ln -s works... yes
>  checking whether make sets $(MAKE)... (cached) yes
>  checking for a BSD-compatible install... /usr/bin/install -c
>  checking for __attribute__... yes
>  checking for runpath switch... -Wl,-rpath,
>  checking for ranlib... ranlib
>  checking for ld used by GCC... /usr/bin/ld
>  checking if the linker (/usr/bin/ld) is GNU ld... yes
>  checking for BSD-compatible nm... /usr/bin/nm -B
>  updating cache ./config.cache
>  loading cache ./config.cache within ltconfig
>  checking for object suffix... o
>  checking for executable suffix... (cached)
>  checking for gcc option to produce PIC... -fPIC
>  checking if gcc PIC flag -fPIC works... yes
>  checking if gcc supports -c -o file.o... yes
>  checking if gcc supports -c -o file.lo... yes
>  checking if gcc supports -fno-rtti -fno-exceptions ... no
>  checking if gcc static flag -static works... -static
>  checking if the linker (/usr/bin/ld) is GNU ld... yes
>  checking whether the linker (/usr/bin/ld) supports shared libraries... yes
>  checking command to parse /usr/bin/nm -B output... ok
>  checking how to hardcode library paths into programs... immediate
>  checking for /usr/bin/ld option to reload object files... -r
>  checking dynamic linker characteristics... Linux ld.so
>  checking if libtool supports shared libraries... yes
>  checking whether to build shared libraries... yes
>  checking whether to build static libraries... yes
>  checking for objdir... .libs
>  creating libtool
>  updating cache ./config.cache
>  configure: loading cache ./config.cache
>  checking for connect... yes
>  checking for res_search... no
>  checking for res_search in -lresolv... yes
>  checking for dn_expand... yes
>  checking for dns_lookup... no
>  checking DB path to use... /etc/sasldb2
>  checking for egrep... grep -E
>  checking for ANSI C header files... yes
>  checking for sys/types.h... yes
>  checking for sys/stat.h... yes
>  checking for stdlib.h... yes
>  checking for string.h... yes
>  checking for memory.h... yes
>  checking for strings.h... yes
>  checking for inttypes.h... yes
>  checking for stdint.h... yes
>  checking for unistd.h... yes
>  checking db.h usability... no
>  checking db.h presence... no
>  checking for db.h... no
>  checking ndbm.h usability... no
>  checking ndbm.h presence... no
>  checking for ndbm.h... no
>  checking gdbm.h usability... no
>  checking gdbm.h presence... no
>  checking for gdbm.h... no
>  checking DB library to use... no
>  configure: WARNING: Disabling SASL authentication database support
>  checking for dlopen in -ldl... yes
>  checking /dev/random to use... /dev/random
>  checking for nm... /usr/bin/nm -B
>  checking for underscore before symbols... no
>  checking for syslog... yes
>  checking for pam_start in -lpam... no
>  checking if I should include saslauthd... /var/state/saslauthd
>  checking to include Courier authdaemond support... /dev/null
>  checking if I should include pwcheck... no
>  checking if I should include the alwaystrue verifier... no
>  checking if we should enable sasl_checkapop... enabled
>  checking CRAM-MD5... enabled
>  checking for OpenSSL... no
>  configure: WARNING: No DES support for DIGEST-MD5
>  checking DIGEST-MD5... enabled
>  configure: WARNING: OpenSSL not found -- OTP will be disabled
>  checking OTP... disabled
>  configure: WARNING: OpenSSL not found -- SRP will be disabled
>  checking SRP... disabled
>  checking KERBEROS_V4... disabled
>  checking for crypt... no
>  checking for crypt in -lcrypt... yes
>  checking gssapi.h usability... no
>  checking gssapi.h presence... no
>  checking for gssapi.h... no
>  checking gssapi/gssapi.h usability... no
>  checking gssapi/gssapi.h presence... no
>  checking for gssapi/gssapi.h... no
>  configure: WARNING: Disabling GSSAPI - no include files found
>  checking GSSAPI... disabled
>  checking PLAIN... enabled
>  checking ANONYMOUS... enabled
>  checking LOGIN... disabled
>  configure: WARNING: OpenSSL not found -- NTLM will be disabled
>  checking NTLM... disabled
>  checking SQL... disabled
>  checking for dmalloc library... no
>  checking for sfio library... no
>  checking for getsubopt... yes
>  checking for snprintf... yes
>  checking for vsnprintf... yes
>  checking for inet_aton in -lresolv... yes
>  checking for getaddrinfo... yes
>  checking for gai_strerror... yes
>  checking for getnameinfo... yes
>  checking for an ANSI C-conforming const... yes
>  checking for inline... inline
>  checking for mode_t... yes
>  checking for pid_t... yes
>  checking return type of signal handlers... void
>  checking whether time.h and sys/time.h may both be included... yes
>  checking for ANSI C header files... (cached) yes
>  checking for dirent.h that defines DIR... yes
>  checking for library containing opendir... none required
>  checking for sys/wait.h that is POSIX.1 compatible... yes
>  checking dlfcn.h usability... yes
>  checking dlfcn.h presence... yes
>  checking for dlfcn.h... yes
>  checking fcntl.h usability... yes
>  checking fcntl.h presence... yes
>  checking for fcntl.h... yes
>  checking limits.h usability... yes
>  checking limits.h presence... yes
>  checking for limits.h... yes
>  checking malloc.h usability... yes
>  checking malloc.h presence... yes
>  checking for malloc.h... yes
>  checking paths.h usability... yes
>  checking paths.h presence... yes
>  checking for paths.h... yes
>  checking for strings.h... (cached) yes
>  checking sys/file.h usability... yes
>  checking sys/file.h presence... yes
>  checking for sys/file.h... yes
>  checking sys/time.h usability... yes
>  checking sys/time.h presence... yes
>  checking for sys/time.h... yes
>  checking syslog.h usability... yes
>  checking syslog.h presence... yes
>  checking for syslog.h... yes
>  checking for unistd.h... (cached) yes
>  checking for inttypes.h... (cached) yes
>  checking sys/uio.h usability... yes
>  checking sys/uio.h presence... yes
>  checking for sys/uio.h... yes
>  checking sys/param.h usability... yes
>  checking sys/param.h presence... yes
>  checking for sys/param.h... yes
>  checking sysexits.h usability... yes
>  checking sysexits.h presence... yes
>  checking for sysexits.h... yes
>  checking stdarg.h usability... yes
>  checking stdarg.h presence... yes
>  checking for stdarg.h... yes
>  checking varargs.h usability... no
>  checking varargs.h presence... no
>  checking for varargs.h... no
>  checking whether you have ss_family in struct sockaddr_storage... yes
>  checking whether you have sa_len in struct sockaddr... no
>  checking for socklen_t... yes
>  checking for gethostname... yes
>  checking for getdomainname... yes
>  checking for getpwnam... yes
>  checking for getspnam... yes
>  checking for gettimeofday... yes
>  checking for inet_aton... yes
>  checking for memcpy... yes
>  checking for mkdir... yes
>  checking for select... yes
>  checking for socket... yes
>  checking for strchr... yes
>  checking for strdup... yes
>  checking for strerror... yes
>  checking for strspn... yes
>  checking for strstr... yes
>  checking for strtol... yes
>  checking for jrand48... yes
>  updating cache ./config.cache
>  configure: creating ./config.status
>  config.status: creating Makefile
>  config.status: creating include/Makefile
>  config.status: creating sasldb/Makefile
>  config.status: creating plugins/Makefile
>  config.status: creating lib/Makefile
>  config.status: creating utils/Makefile
>  config.status: creating doc/Makefile
>  config.status: creating sample/Makefile
>  config.status: creating java/Makefile
>  config.status: creating java/CyrusSasl/Makefile
>  config.status: creating java/Test/Makefile
>  config.status: creating java/javax/Makefile
>  config.status: creating java/javax/security/Makefile
>  config.status: creating java/javax/security/auth/Makefile
>  config.status: creating java/javax/security/auth/callback/Makefile
>  config.status: creating pwcheck/Makefile
>  config.status: creating man/Makefile
>  config.status: creating config.h
>  config.status: executing depfiles commands
>  configure: configuring in saslauthd
>  configure: running /bin/sh './configure' --prefix=/usr/local  
>  '--enable-gssapi=/usr/kerberos/include/' '--enable-static' 
>  '--without-des' '--without-openssl' 'CFLAGS=-O2' 
>  --cache-file=.././config.cache --srcdir=.
>  configure: loading cache .././config.cache
>  checking build system type... (cached) i686-pc-linux-gnu
>  checking host system type... (cached) i686-pc-linux-gnu
>  checking for a BSD-compatible install... (cached) /usr/bin/install -c
>  checking whether build environment is sane... yes
>  checking for gawk... (cached) gawk
>  checking whether make sets $(MAKE)... (cached) yes
>  checking for gcc... (cached) gcc
>  checking for C compiler default output... a.out
>  checking whether the C compiler works... yes
>  checking whether we are cross compiling... no
>  checking for suffix of executables...
>  checking for suffix of object files... (cached) o
>  checking whether we are using the GNU C compiler... (cached) yes
>  checking whether gcc accepts -g... (cached) yes
>  checking for gcc option to accept ANSI C... (cached) none needed
>  checking for style of include used by make... GNU
>  checking dependency style of gcc... (cached) gcc3
>  checking how to run the C preprocessor... (cached) gcc -E
>  checking for gawk... (cached) gawk
>  checking whether make sets $(MAKE)... (cached) yes
>  checking whether ln -s works... yes
>  checking for a BSD-compatible install... /usr/bin/install -c
>  checking for __attribute__... (cached) yes
>  checking for runpath switch... -Wl,-rpath,
>  checking for connect... (cached) yes
>  checking for res_search... (cached) no
>  checking for res_search in -lresolv... (cached) yes
>  checking for dn_expand... (cached) yes
>  checking for dns_lookup... (cached) no
>  checking for egrep... (cached) grep -E
>  checking for ANSI C header files... (cached) yes
>  checking for sys/types.h... (cached) yes
>  checking for sys/stat.h... (cached) yes
>  checking for stdlib.h... (cached) yes
>  checking for string.h... (cached) yes
>  checking for memory.h... (cached) yes
>  checking for strings.h... (cached) yes
>  checking for inttypes.h... (cached) yes
>  checking for stdint.h... (cached) yes
>  checking for unistd.h... (cached) yes
>  checking for OpenSSL... no
>  checking KERBEROS_V4... disabled
>  checking for crypt... (cached) no
>  checking for crypt in -lcrypt... (cached) yes
>  checking for gssapi.h... (cached) no
>  checking for gssapi/gssapi.h... (cached) no
>  configure: WARNING: Disabling GSSAPI - no include files found
>  checking GSSAPI... disabled
>  checking for crypt... (cached) no
>  checking for crypt in -lcrypt... (cached) yes
>  checking for pam_start in -lpam... (cached) no
>  checking for PAM support... no
>  checking for inet_aton in -lresolv... (cached) yes
>  checking to include LDAP support... no
>  checking for ANSI C header files... (cached) yes
>  checking for sys/wait.h that is POSIX.1 compatible... (cached) yes
>  checking whether time.h and sys/time.h may both be included... (cached) yes
>  checking crypt.h usability... yes
>  checking crypt.h presence... yes
>  checking for crypt.h... yes
>  checking for fcntl.h... (cached) yes
>  checking krb5.h usability... no
>  checking krb5.h presence... no
>  checking for krb5.h... no
>  checking for strings.h... (cached) yes
>  checking for syslog.h... (cached) yes
>  checking for unistd.h... (cached) yes
>  checking for sys/time.h... (cached) yes
>  checking for sys/uio.h... (cached) yes
>  checking for an ANSI C-conforming const... (cached) yes
>  checking for pid_t... (cached) yes
>  checking whether gcc implements __func__... yes
>  checking return type of signal handlers... (cached) void
>  checking for gethostname... (cached) yes
>  checking for mkdir... (cached) yes
>  checking for socket... (cached) yes
>  checking for strdup... (cached) yes
>  checking for getspnam... (cached) yes
>  checking for strlcat... no
>  checking for strlcpy... no
>  checking for getaddrinfo... (cached) yes
>  checking for getnameinfo... (cached) yes
>  checking whether you have ss_family in struct sockaddr_storage... 
>  (cached) yes
>  checking whether you have sa_len in struct sockaddr... (cached) no
>  checking for socklen_t... (cached) yes
>  updating cache .././config.cache
>  configure: creating ./config.status
>  config.status: creating Makefile
>  config.status: creating saslauthd.h
>  config.status: executing depfiles commands
>  Configuration Complete. Type 'make' to build.
>  [root@genie cyrus-sasl-2.1.20]# make
>  make  all-recursive
>  make[1]: Entering directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
>  Making all in include
>  make[2]: Entering directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
>  if gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -W -O2 -MT makemd5.o -MD 
>  -MP -MF ".deps/makemd5.Tpo" \
>   -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \
>  then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \
>  else rm -f ".deps/makemd5.Tpo"; exit 1; \
>  fi
>  /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o makemd5  
>  makemd5.o  -lresolv
>  mkdir .libs
>  gcc -Wall -W -O2 -o makemd5 makemd5.o -lresolv
>  rm -f md5global.h
>  ./makemd5 md5global.h
>  make[2]: Leaving directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
>  Making all in sasldb
>  make[2]: Entering directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb'
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../include     -Wall -W -O2 -MT allockey.lo -MD -MP -MF 
>  ".deps/allockey.Tpo" \
>   -c -o allockey.lo `test -f 'allockey.c' || echo './'`allockey.c; \
>  then mv ".deps/allockey.Tpo" ".deps/allockey.Plo"; \
>  else rm -f ".deps/allockey.Tpo"; exit 1; \
>  fi
>  mkdir .libs
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W -O2 
>  -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c  -fPIC 
>  -DPIC -o .libs/allockey.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W -O2 
>  -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c -o 
>  allockey.o >/dev/null 2>&1
>  mv -f .libs/allockey.lo allockey.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../include     -Wall -W -O2 -MT db_none.lo -MD -MP -MF 
>  ".deps/db_none.Tpo" \
>   -c -o db_none.lo `test -f 'db_none.c' || echo './'`db_none.c; \
>  then mv ".deps/db_none.Tpo" ".deps/db_none.Plo"; \
>  else rm -f ".deps/db_none.Tpo"; exit 1; \
>  fi
>  rm -f .libs/db_none.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W -O2 
>  -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c  -fPIC -DPIC 
>  -o .libs/db_none.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W -O2 
>  -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -o db_none.o 
>   >/dev/null 2>&1
>  mv -f .libs/db_none.lo db_none.lo
>  /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o libsasldb.la   
>  allockey.lo db_none.lo  -lresolv
>  rm -fr .libs/libsasldb.la .libs/libsasldb.* .libs/libsasldb.*
>  ar cru .libs/libsasldb.al allockey.lo db_none.lo
>  ranlib .libs/libsasldb.al
>  creating libsasldb.la
>  (cd .libs && rm -f libsasldb.la && ln -s ../libsasldb.la libsasldb.la)
>  ar cru .libs/libsasldb.a db_none.o
>  make[2]: Leaving directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb'
>  Making all in plugins
>  make[2]: Entering directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins'
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
>  cram.lo -MD -MP -MF ".deps/cram.Tpo" \
>   -c -o cram.lo `test -f 'cram.c' || echo './'`cram.c; \
>  then mv ".deps/cram.Tpo" ".deps/cram.Plo"; \
>  else rm -f ".deps/cram.Tpo"; exit 1; \
>  fi
>  mkdir .libs
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c 
>  cram.c  -fPIC -DPIC -o .libs/cram.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c 
>  cram.c -o cram.o >/dev/null 2>&1
>  mv -f .libs/cram.lo cram.lo
>  /bin/sh ./makeinit.sh
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
>  crammd5_init.lo -MD -MP -MF ".deps/crammd5_init.Tpo" \
>   -c -o crammd5_init.lo `test -f 'crammd5_init.c' || echo 
>  './'`crammd5_init.c; \
>  then mv ".deps/crammd5_init.Tpo" ".deps/crammd5_init.Plo"; \
>  else rm -f ".deps/crammd5_init.Tpo"; exit 1; \
>  fi
>  rm -f .libs/crammd5_init.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF 
>  .deps/crammd5_init.Tpo -c crammd5_init.c  -fPIC -DPIC -o 
>  .libs/crammd5_init.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF 
>  .deps/crammd5_init.Tpo -c crammd5_init.c -o crammd5_init.o >/dev/null 2>&1
>  mv -f .libs/crammd5_init.lo crammd5_init.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
>  plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \
>   -c -o plugin_common.lo `test -f 'plugin_common.c' || echo 
>  './'`plugin_common.c; \
>  then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \
>  else rm -f ".deps/plugin_common.Tpo"; exit 1; \
>  fi
>  rm -f .libs/plugin_common.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
>  .deps/plugin_common.Tpo -c plugin_common.c  -fPIC -DPIC -o 
>  .libs/plugin_common.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
>  .deps/plugin_common.Tpo -c plugin_common.c -o plugin_common.o >/dev/null 
>  2>&1
>  mv -f .libs/plugin_common.lo plugin_common.lo
>  /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module -export-dynamic 
>  -rpath /usr/lib/sasl2  -o libcrammd5.la  -version-info 2:20:0 cram.lo 
>  crammd5_init.lo plugin_common.lo  -lresolv
>  rm -fr .libs/libcrammd5.la .libs/libcrammd5.* .libs/libcrammd5.*
>  gcc -shared  cram.lo crammd5_init.lo plugin_common.lo  -lresolv -lc  
>  -Wl,-soname -Wl,libcrammd5.so.2 -o .libs/libcrammd5.so.2.0.20
>  (cd .libs && rm -f libcrammd5.so.2 && ln -s libcrammd5.so.2.0.20 
>  libcrammd5.so.2)
>  (cd .libs && rm -f libcrammd5.so && ln -s libcrammd5.so.2.0.20 
>  libcrammd5.so)
>  ar cru .libs/libcrammd5.a  cram.o crammd5_init.o plugin_common.o
>  ranlib .libs/libcrammd5.a
>  creating libcrammd5.la
>  (cd .libs && rm -f libcrammd5.la && ln -s ../libcrammd5.la
> libcrammd5.la)
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
>  digestmd5.lo -MD -MP -MF ".deps/digestmd5.Tpo" \
>   -c -o digestmd5.lo `test -f 'digestmd5.c' || echo './'`digestmd5.c; \
>  then mv ".deps/digestmd5.Tpo" ".deps/digestmd5.Plo"; \
>  else rm -f ".deps/digestmd5.Tpo"; exit 1; \
>  fi
>  rm -f .libs/digestmd5.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF 
>  .deps/digestmd5.Tpo -c digestmd5.c  -fPIC -DPIC -o .libs/digestmd5.lo
>  digestmd5.c: In function `digestmd5_server_mech_step2':
>  digestmd5.c:2093: warning: dereferencing type-punned pointer will break 
>  strict-aliasing rules
>  digestmd5.c:2110: warning: dereferencing type-punned pointer will break 
>  strict-aliasing rules
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF 
>  .deps/digestmd5.Tpo -c digestmd5.c -o digestmd5.o >/dev/null 2>&1
>  mv -f .libs/digestmd5.lo digestmd5.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
>  digestmd5_init.lo -MD -MP -MF ".deps/digestmd5_init.Tpo" \
>   -c -o digestmd5_init.lo `test -f 'digestmd5_init.c' || echo 
>  './'`digestmd5_init.c; \
>  then mv ".deps/digestmd5_init.Tpo" ".deps/digestmd5_init.Plo"; \
>  else rm -f ".deps/digestmd5_init.Tpo"; exit 1; \
>  fi
>  rm -f .libs/digestmd5_init.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF 
>  .deps/digestmd5_init.Tpo -c digestmd5_init.c  -fPIC -DPIC -o 
>  .libs/digestmd5_init.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF 
>  .deps/digestmd5_init.Tpo -c digestmd5_init.c -o digestmd5_init.o 
>   >/dev/null 2>&1
>  mv -f .libs/digestmd5_init.lo digestmd5_init.lo
>  /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module -export-dynamic 
>  -rpath /usr/lib/sasl2  -o libdigestmd5.la  -version-info 2:20:0 
>  digestmd5.lo digestmd5_init.lo plugin_common.lo  -lresolv   -lresolv
>  rm -fr .libs/libdigestmd5.la .libs/libdigestmd5.* .libs/libdigestmd5.*
>  gcc -shared  digestmd5.lo digestmd5_init.lo plugin_common.lo  -lresolv 
>  -lresolv -lc  -Wl,-soname -Wl,libdigestmd5.so.2 -o 
>  .libs/libdigestmd5.so.2.0.20
>  (cd .libs && rm -f libdigestmd5.so.2 && ln -s libdigestmd5.so.2.0.20 
>  libdigestmd5.so.2)
>  (cd .libs && rm -f libdigestmd5.so && ln -s libdigestmd5.so.2.0.20 
>  libdigestmd5.so)
>  ar cru .libs/libdigestmd5.a  digestmd5.o digestmd5_init.o plugin_common.o
>  ranlib .libs/libdigestmd5.a
>  creating libdigestmd5.la
>  (cd .libs && rm -f libdigestmd5.la && ln -s ../libdigestmd5.la 
>  libdigestmd5.la)
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
>  plain.lo -MD -MP -MF ".deps/plain.Tpo" \
>   -c -o plain.lo `test -f 'plain.c' || echo './'`plain.c; \
>  then mv ".deps/plain.Tpo" ".deps/plain.Plo"; \
>  else rm -f ".deps/plain.Tpo"; exit 1; \
>  fi
>  rm -f .libs/plain.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo -c 
>  plain.c  -fPIC -DPIC -o .libs/plain.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo -c 
>  plain.c -o plain.o >/dev/null 2>&1
>  mv -f .libs/plain.lo plain.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
>  plain_init.lo -MD -MP -MF ".deps/plain_init.Tpo" \
>   -c -o plain_init.lo `test -f 'plain_init.c' || echo './'`plain_init.c;
> \
>  then mv ".deps/plain_init.Tpo" ".deps/plain_init.Plo"; \
>  else rm -f ".deps/plain_init.Tpo"; exit 1; \
>  fi
>  rm -f .libs/plain_init.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF 
>  .deps/plain_init.Tpo -c plain_init.c  -fPIC -DPIC -o .libs/plain_init.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF 
>  .deps/plain_init.Tpo -c plain_init.c -o plain_init.o >/dev/null 2>&1
>  mv -f .libs/plain_init.lo plain_init.lo
>  /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module -export-dynamic 
>  -rpath /usr/lib/sasl2  -o libplain.la  -version-info 2:20:0 plain.lo 
>  plain_init.lo plugin_common.lo -lcrypt  -lresolv
>  rm -fr .libs/libplain.la .libs/libplain.* .libs/libplain.*
>  gcc -shared  plain.lo plain_init.lo plugin_common.lo  -lcrypt -lresolv 
>  -lc  -Wl,-soname -Wl,libplain.so.2 -o .libs/libplain.so.2.0.20
>  (cd .libs && rm -f libplain.so.2 && ln -s libplain.so.2.0.20
> libplain.so.2)
>  (cd .libs && rm -f libplain.so && ln -s libplain.so.2.0.20 libplain.so)
>  ar cru .libs/libplain.a  plain.o plain_init.o plugin_common.o
>  ranlib .libs/libplain.a
>  creating libplain.la
>  (cd .libs && rm -f libplain.la && ln -s ../libplain.la libplain.la)
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
>  anonymous.lo -MD -MP -MF ".deps/anonymous.Tpo" \
>   -c -o anonymous.lo `test -f 'anonymous.c' || echo './'`anonymous.c; \
>  then mv ".deps/anonymous.Tpo" ".deps/anonymous.Plo"; \
>  else rm -f ".deps/anonymous.Tpo"; exit 1; \
>  fi
>  rm -f .libs/anonymous.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF 
>  .deps/anonymous.Tpo -c anonymous.c  -fPIC -DPIC -o .libs/anonymous.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF 
>  .deps/anonymous.Tpo -c anonymous.c -o anonymous.o >/dev/null 2>&1
>  mv -f .libs/anonymous.lo anonymous.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
>  anonymous_init.lo -MD -MP -MF ".deps/anonymous_init.Tpo" \
>   -c -o anonymous_init.lo `test -f 'anonymous_init.c' || echo 
>  './'`anonymous_init.c; \
>  then mv ".deps/anonymous_init.Tpo" ".deps/anonymous_init.Plo"; \
>  else rm -f ".deps/anonymous_init.Tpo"; exit 1; \
>  fi
>  rm -f .libs/anonymous_init.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF 
>  .deps/anonymous_init.Tpo -c anonymous_init.c  -fPIC -DPIC -o 
>  .libs/anonymous_init.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
>  -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF 
>  .deps/anonymous_init.Tpo -c anonymous_init.c -o anonymous_init.o 
>   >/dev/null 2>&1
>  mv -f .libs/anonymous_init.lo anonymous_init.lo
>  /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module -export-dynamic 
>  -rpath /usr/lib/sasl2  -o libanonymous.la  -version-info 2:20:0 
>  anonymous.lo anonymous_init.lo plugin_common.lo  -lresolv
>  rm -fr .libs/libanonymous.la .libs/libanonymous.* .libs/libanonymous.*
>  gcc -shared  anonymous.lo anonymous_init.lo plugin_common.lo  -lresolv 
>  -lc  -Wl,-soname -Wl,libanonymous.so.2 -o .libs/libanonymous.so.2.0.20
>  (cd .libs && rm -f libanonymous.so.2 && ln -s libanonymous.so.2.0.20 
>  libanonymous.so.2)
>  (cd .libs && rm -f libanonymous.so && ln -s libanonymous.so.2.0.20 
>  libanonymous.so)
>  ar cru .libs/libanonymous.a  anonymous.o anonymous_init.o plugin_common.o
>  ranlib .libs/libanonymous.a
>  creating libanonymous.la
>  (cd .libs && rm -f libanonymous.la && ln -s ../libanonymous.la 
>  libanonymous.la)
>  make[2]: Leaving directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins'
>  Making all in lib
>  make[2]: Entering directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib'
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT auxprop.lo 
>  -MD -MP -MF ".deps/auxprop.Tpo" \
>   -c -o auxprop.lo `test -f 'auxprop.c' || echo './'`auxprop.c; \
>  then mv ".deps/auxprop.Tpo" ".deps/auxprop.Plo"; \
>  else rm -f ".deps/auxprop.Tpo"; exit 1; \
>  fi
>  mkdir .libs
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT auxprop.lo -MD -MP -MF .deps/auxprop.Tpo -c auxprop.c  
>  -fPIC -DPIC -o .libs/auxprop.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT auxprop.lo -MD -MP -MF .deps/auxprop.Tpo -c auxprop.c 
>  -o auxprop.o >/dev/null 2>&1
>  mv -f .libs/auxprop.lo auxprop.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT canonusr.lo 
>  -MD -MP -MF ".deps/canonusr.Tpo" \
>   -c -o canonusr.lo `test -f 'canonusr.c' || echo './'`canonusr.c; \
>  then mv ".deps/canonusr.Tpo" ".deps/canonusr.Plo"; \
>  else rm -f ".deps/canonusr.Tpo"; exit 1; \
>  fi
>  rm -f .libs/canonusr.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT canonusr.lo -MD -MP -MF .deps/canonusr.Tpo -c 
>  canonusr.c  -fPIC -DPIC -o .libs/canonusr.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT canonusr.lo -MD -MP -MF .deps/canonusr.Tpo -c 
>  canonusr.c -o canonusr.o >/dev/null 2>&1
>  mv -f .libs/canonusr.lo canonusr.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT checkpw.lo 
>  -MD -MP -MF ".deps/checkpw.Tpo" \
>   -c -o checkpw.lo `test -f 'checkpw.c' || echo './'`checkpw.c; \
>  then mv ".deps/checkpw.Tpo" ".deps/checkpw.Plo"; \
>  else rm -f ".deps/checkpw.Tpo"; exit 1; \
>  fi
>  rm -f .libs/checkpw.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT checkpw.lo -MD -MP -MF .deps/checkpw.Tpo -c checkpw.c  
>  -fPIC -DPIC -o .libs/checkpw.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT checkpw.lo -MD -MP -MF .deps/checkpw.Tpo -c checkpw.c 
>  -o checkpw.o >/dev/null 2>&1
>  mv -f .libs/checkpw.lo checkpw.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT client.lo -MD 
>  -MP -MF ".deps/client.Tpo" \
>   -c -o client.lo `test -f 'client.c' || echo './'`client.c; \
>  then mv ".deps/client.Tpo" ".deps/client.Plo"; \
>  else rm -f ".deps/client.Tpo"; exit 1; \
>  fi
>  rm -f .libs/client.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo -c client.c  
>  -fPIC -DPIC -o .libs/client.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo -c client.c -o 
>  client.o >/dev/null 2>&1
>  mv -f .libs/client.lo client.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT common.lo -MD 
>  -MP -MF ".deps/common.Tpo" \
>   -c -o common.lo `test -f 'common.c' || echo './'`common.c; \
>  then mv ".deps/common.Tpo" ".deps/common.Plo"; \
>  else rm -f ".deps/common.Tpo"; exit 1; \
>  fi
>  rm -f .libs/common.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo -c common.c  
>  -fPIC -DPIC -o .libs/common.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo -c common.c -o 
>  common.o >/dev/null 2>&1
>  mv -f .libs/common.lo common.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT config.lo -MD 
>  -MP -MF ".deps/config.Tpo" \
>   -c -o config.lo `test -f 'config.c' || echo './'`config.c; \
>  then mv ".deps/config.Tpo" ".deps/config.Plo"; \
>  else rm -f ".deps/config.Tpo"; exit 1; \
>  fi
>  rm -f .libs/config.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo -c config.c  
>  -fPIC -DPIC -o .libs/config.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo -c config.c -o 
>  config.o >/dev/null 2>&1
>  mv -f .libs/config.lo config.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT external.lo 
>  -MD -MP -MF ".deps/external.Tpo" \
>   -c -o external.lo `test -f 'external.c' || echo './'`external.c; \
>  then mv ".deps/external.Tpo" ".deps/external.Plo"; \
>  else rm -f ".deps/external.Tpo"; exit 1; \
>  fi
>  rm -f .libs/external.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT external.lo -MD -MP -MF .deps/external.Tpo -c 
>  external.c  -fPIC -DPIC -o .libs/external.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT external.lo -MD -MP -MF .deps/external.Tpo -c 
>  external.c -o external.o >/dev/null 2>&1
>  mv -f .libs/external.lo external.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT md5.lo -MD 
>  -MP -MF ".deps/md5.Tpo" \
>   -c -o md5.lo `test -f 'md5.c' || echo './'`md5.c; \
>  then mv ".deps/md5.Tpo" ".deps/md5.Plo"; \
>  else rm -f ".deps/md5.Tpo"; exit 1; \
>  fi
>  rm -f .libs/md5.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c md5.c  -fPIC -DPIC 
>  -o .libs/md5.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c md5.c -o md5.o 
>   >/dev/null 2>&1
>  mv -f .libs/md5.lo md5.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT saslutil.lo 
>  -MD -MP -MF ".deps/saslutil.Tpo" \
>   -c -o saslutil.lo `test -f 'saslutil.c' || echo './'`saslutil.c; \
>  then mv ".deps/saslutil.Tpo" ".deps/saslutil.Plo"; \
>  else rm -f ".deps/saslutil.Tpo"; exit 1; \
>  fi
>  rm -f .libs/saslutil.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT saslutil.lo -MD -MP -MF .deps/saslutil.Tpo -c 
>  saslutil.c  -fPIC -DPIC -o .libs/saslutil.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT saslutil.lo -MD -MP -MF .deps/saslutil.Tpo -c 
>  saslutil.c -o saslutil.o >/dev/null 2>&1
>  mv -f .libs/saslutil.lo saslutil.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT server.lo -MD 
>  -MP -MF ".deps/server.Tpo" \
>   -c -o server.lo `test -f 'server.c' || echo './'`server.c; \
>  then mv ".deps/server.Tpo" ".deps/server.Plo"; \
>  else rm -f ".deps/server.Tpo"; exit 1; \
>  fi
>  rm -f .libs/server.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo -c server.c  
>  -fPIC -DPIC -o .libs/server.lo
>  server.c: In function `sasl_setpass':
>  server.c:151: warning: dereferencing type-punned pointer will break 
>  strict-aliasing rules
>  server.c: In function `sasl_server_start':
>  server.c:1245: warning: dereferencing type-punned pointer will break 
>  strict-aliasing rules
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo -c server.c -o 
>  server.o >/dev/null 2>&1
>  mv -f .libs/server.lo server.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT seterror.lo 
>  -MD -MP -MF ".deps/seterror.Tpo" \
>   -c -o seterror.lo `test -f 'seterror.c' || echo './'`seterror.c; \
>  then mv ".deps/seterror.Tpo" ".deps/seterror.Plo"; \
>  else rm -f ".deps/seterror.Tpo"; exit 1; \
>  fi
>  rm -f .libs/seterror.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT seterror.lo -MD -MP -MF .deps/seterror.Tpo -c 
>  seterror.c  -fPIC -DPIC -o .libs/seterror.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT seterror.lo -MD -MP -MF .deps/seterror.Tpo -c 
>  seterror.c -o seterror.o >/dev/null 2>&1
>  mv -f .libs/seterror.lo seterror.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT dlopen.lo -MD 
>  -MP -MF ".deps/dlopen.Tpo" \
>   -c -o dlopen.lo `test -f 'dlopen.c' || echo './'`dlopen.c; \
>  then mv ".deps/dlopen.Tpo" ".deps/dlopen.Plo"; \
>  else rm -f ".deps/dlopen.Tpo"; exit 1; \
>  fi
>  rm -f .libs/dlopen.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo -c dlopen.c  
>  -fPIC -DPIC -o .libs/dlopen.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo -c dlopen.c -o 
>  dlopen.o >/dev/null 2>&1
>  mv -f .libs/dlopen.lo dlopen.lo
>  if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
>  -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
>  plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \
>   -c -o plugin_common.lo `test -f '../plugins/plugin_common.c' || echo 
>  './'`../plugins/plugin_common.c; \
>  then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \
>  else rm -f ".deps/plugin_common.Tpo"; exit 1; \
>  fi
>  rm -f .libs/plugin_common.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF .deps/plugin_common.Tpo -c 
>  ../plugins/plugin_common.c  -fPIC -DPIC -o .libs/plugin_common.lo
>  gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins -I../include 
>  -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF .deps/plugin_common.Tpo -c 
>  ../plugins/plugin_common.c -o plugin_common.o >/dev/null 2>&1
>  mv -f .libs/plugin_common.lo plugin_common.lo
>  /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o libsasl2.la -rpath 
>  /usr/local/lib -version-info 2:20:0 auxprop.lo canonusr.lo checkpw.lo 
>  client.lo common.lo config.lo external.lo md5.lo saslutil.lo server.lo 
>  seterror.lo dlopen.lo plugin_common.lo   -ldl -lresolv   -lresolv
>  rm -fr .libs/libsasl2.la .libs/libsasl2.* .libs/libsasl2.*
>  gcc -shared  auxprop.lo canonusr.lo checkpw.lo client.lo common.lo 
>  config.lo external.lo md5.lo saslutil.lo server.lo seterror.lo dlopen.lo 
>  plugin_common.lo  -ldl -lresolv -lresolv -lc  -Wl,-soname 
>  -Wl,libsasl2.so.2 -o .libs/libsasl2.so.2.0.20
>  (cd .libs && rm -f libsasl2.so.2 && ln -s libsasl2.so.2.0.20
> libsasl2.so.2)
>  (cd .libs && rm -f libsasl2.so && ln -s libsasl2.so.2.0.20 libsasl2.so)
>  ar cru .libs/libsasl2.a  auxprop.o canonusr.o checkpw.o client.o 
>  common.o config.o external.o md5.o saslutil.o server.o seterror.o 
>  dlopen.o plugin_common.o
>  ranlib .libs/libsasl2.a
>  creating libsasl2.la
>  (cd .libs && rm -f libsasl2.la && ln -s ../libsasl2.la libsasl2.la)
>  if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
>  -I../include    -Wall -W -O2 -MT ../plugins/sasldb.o -MD -MP -MF 
>  ".deps/../plugins/sasldb.Tpo" \
>   -c -o ../plugins/sasldb.o `test -f '../plugins/sasldb.c' || echo 
>  './'`../plugins/sasldb.c; \
>  then mv ".deps/../plugins/sasldb.Tpo" ".deps/../plugins/sasldb.Po";
> \
>  else rm -f ".deps/../plugins/sasldb.Tpo"; exit 1; \
>  fi
>  ../plugins/sasldb.c:129: fatal error: opening dependency file 
>  .deps/../plugins/sasldb.Tpo: No such file or directory
>  compilation terminated.
>  make[2]: *** [../plugins/sasldb.o] Error 1
>  make[2]: Leaving directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib'
>  make[1]: *** [all-recursive] Error 1
>  make[1]: Leaving directory 
>  `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
>  make: *** [all] Error 2
>  [root@genie cyrus-sasl-2.1.20]#
>  
>  -- 
>  Fedora-directory-users mailing list
>  Fedora-directory-users(a)redhat.com
>  https://www.redhat.com/mailman/listinfo/fedora-directory-users

[Nathan Kinder]

In addition to what Rob mentioned below, your build is not finding the 
gssapi header files.  I checked on my FC3 machine, and the gssapi 
include location is /usr/include/gssapi.  You should change your 
configure line to have "--enable-gssapi=/usr/include/gssapi".

-NGK

Rob Crittenden wrote:

>  This info was great, thanks.
>
>  My FC3 box is offline right now but I re-made my cyrus-sasl in RHEL 3 
>  and I noticed a few differences.
>
>  One is when configure is checking for database support (db, ndbm, 
>  etc). It is found for me, not for you.
>
>  Can you try installing db4-devel-4.1.25-8.1 (or whatever the 
>  equivalent is on FC3)?
>
>  Another difference I saw is in pam_start in -lpam. I don't know if 
>  this is anything to worry about or not.
>
>  rob
>
>  Jason Kullo Sam wrote:
>
> > Noriko Hosoi wrote:
> >
> >> My cyrus sasl build creates a symbolic link to the lib directory 
> >> like this.  Do you see it in your build log?
> >>
> >>> [...]
> >>> adding static plugins and dependencies
> >>> ar cru .libs/libsasl2.a ../plugins/sasldb.o ../sasldb/db_berkeley.o 
> >>> ../sasldb/allockey.o ../plugins/cram.o ../plugins/digestmd5.o 
> >>> ../plugins/gssapi.o ../plugins/plain.o ../plugins/anonymous.o
> >>> rm -f libsasl2.a
> >>> *ln -s .libs/libsasl2.a libsasl2.a*
> >>> gmake[2]: Leaving directory `/work/cyrus-sasl-2.1.20/lib'
> >>
> >>
> >>
> >>
> >> --noriko
> >>
> >> Richard Megginson wrote:
> >>
> >>> There is still no libsasl2.a.  I'm not sure what the problem is.  
> >>> Try using "make" instead of "gmake" - perhaps gmake is
> slightly 
> >>> different on your OS/version?
> >>>
> > ===========================
> > Answering both of these...
> > I cleaned and blew up the directory again, and started over. Even 
> > fixed a typo in the configure portion(apparently this typo allowed it 
> > to finish before). The configureation was done, but the make failed. 
> > It doesn't look like it ever even MAKES the libsasl2.a, nevermind 
> > links it...
> >
> > Here's the whole shabang in case my noobness is leaving something 
> > important out...
> > =================================================================
> > [root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf -
> > tar: Read 2048 bytes from -
> > [root@genie ds]# cd cyrus-sasl-2.1.20
> > [root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure 
> > --enable-gssapi=/usr/kerberos/include/ --enable-static --without-des 
> > --without-openssl
> > configure: creating cache ./config.cache
> > checking build system type... i686-pc-linux-gnu
> > checking host system type... i686-pc-linux-gnu
> > checking target system type... i686-pc-linux-gnu
> > checking for a BSD-compatible install... /usr/bin/install -c
> > checking whether build environment is sane... yes
> > checking for gawk... gawk
> > checking whether make sets $(MAKE)... yes
> > checking for gcc... gcc
> > checking for C compiler default output... a.out
> > checking whether the C compiler works... yes
> > checking whether we are cross compiling... no
> > checking for suffix of executables...
> > checking for suffix of object files... o
> > checking whether we are using the GNU C compiler... yes
> > checking whether gcc accepts -g... yes
> > checking for gcc option to accept ANSI C... none needed
> > checking for style of include used by make... GNU
> > checking dependency style of gcc... gcc3
> > checking how to run the C preprocessor... gcc -E
> > checking for gawk... (cached) gawk
> > checking whether ln -s works... yes
> > checking whether make sets $(MAKE)... (cached) yes
> > checking for a BSD-compatible install... /usr/bin/install -c
> > checking for __attribute__... yes
> > checking for runpath switch... -Wl,-rpath,
> > checking for ranlib... ranlib
> > checking for ld used by GCC... /usr/bin/ld
> > checking if the linker (/usr/bin/ld) is GNU ld... yes
> > checking for BSD-compatible nm... /usr/bin/nm -B
> > updating cache ./config.cache
> > loading cache ./config.cache within ltconfig
> > checking for object suffix... o
> > checking for executable suffix... (cached)
> > checking for gcc option to produce PIC... -fPIC
> > checking if gcc PIC flag -fPIC works... yes
> > checking if gcc supports -c -o file.o... yes
> > checking if gcc supports -c -o file.lo... yes
> > checking if gcc supports -fno-rtti -fno-exceptions ... no
> > checking if gcc static flag -static works... -static
> > checking if the linker (/usr/bin/ld) is GNU ld... yes
> > checking whether the linker (/usr/bin/ld) supports shared 
> > libraries... yes
> > checking command to parse /usr/bin/nm -B output... ok
> > checking how to hardcode library paths into programs... immediate
> > checking for /usr/bin/ld option to reload object files... -r
> > checking dynamic linker characteristics... Linux ld.so
> > checking if libtool supports shared libraries... yes
> > checking whether to build shared libraries... yes
> > checking whether to build static libraries... yes
> > checking for objdir... .libs
> > creating libtool
> > updating cache ./config.cache
> > configure: loading cache ./config.cache
> > checking for connect... yes
> > checking for res_search... no
> > checking for res_search in -lresolv... yes
> > checking for dn_expand... yes
> > checking for dns_lookup... no
> > checking DB path to use... /etc/sasldb2
> > checking for egrep... grep -E
> > checking for ANSI C header files... yes
> > checking for sys/types.h... yes
> > checking for sys/stat.h... yes
> > checking for stdlib.h... yes
> > checking for string.h... yes
> > checking for memory.h... yes
> > checking for strings.h... yes
> > checking for inttypes.h... yes
> > checking for stdint.h... yes
> > checking for unistd.h... yes
> > checking db.h usability... no
> > checking db.h presence... no
> > checking for db.h... no
> > checking ndbm.h usability... no
> > checking ndbm.h presence... no
> > checking for ndbm.h... no
> > checking gdbm.h usability... no
> > checking gdbm.h presence... no
> > checking for gdbm.h... no
> > checking DB library to use... no
> > configure: WARNING: Disabling SASL authentication database support
> > checking for dlopen in -ldl... yes
> > checking /dev/random to use... /dev/random
> > checking for nm... /usr/bin/nm -B
> > checking for underscore before symbols... no
> > checking for syslog... yes
> > checking for pam_start in -lpam... no
> > checking if I should include saslauthd... /var/state/saslauthd
> > checking to include Courier authdaemond support... /dev/null
> > checking if I should include pwcheck... no
> > checking if I should include the alwaystrue verifier... no
> > checking if we should enable sasl_checkapop... enabled
> > checking CRAM-MD5... enabled
> > checking for OpenSSL... no
> > configure: WARNING: No DES support for DIGEST-MD5
> > checking DIGEST-MD5... enabled
> > configure: WARNING: OpenSSL not found -- OTP will be disabled
> > checking OTP... disabled
> > configure: WARNING: OpenSSL not found -- SRP will be disabled
> > checking SRP... disabled
> > checking KERBEROS_V4... disabled
> > checking for crypt... no
> > checking for crypt in -lcrypt... yes
> > checking gssapi.h usability... no
> > checking gssapi.h presence... no
> > checking for gssapi.h... no
> > checking gssapi/gssapi.h usability... no
> > checking gssapi/gssapi.h presence... no
> > checking for gssapi/gssapi.h... no
> > configure: WARNING: Disabling GSSAPI - no include files found
> > checking GSSAPI... disabled
> > checking PLAIN... enabled
> > checking ANONYMOUS... enabled
> > checking LOGIN... disabled
> > configure: WARNING: OpenSSL not found -- NTLM will be disabled
> > checking NTLM... disabled
> > checking SQL... disabled
> > checking for dmalloc library... no
> > checking for sfio library... no
> > checking for getsubopt... yes
> > checking for snprintf... yes
> > checking for vsnprintf... yes
> > checking for inet_aton in -lresolv... yes
> > checking for getaddrinfo... yes
> > checking for gai_strerror... yes
> > checking for getnameinfo... yes
> > checking for an ANSI C-conforming const... yes
> > checking for inline... inline
> > checking for mode_t... yes
> > checking for pid_t... yes
> > checking return type of signal handlers... void
> > checking whether time.h and sys/time.h may both be included... yes
> > checking for ANSI C header files... (cached) yes
> > checking for dirent.h that defines DIR... yes
> > checking for library containing opendir... none required
> > checking for sys/wait.h that is POSIX.1 compatible... yes
> > checking dlfcn.h usability... yes
> > checking dlfcn.h presence... yes
> > checking for dlfcn.h... yes
> > checking fcntl.h usability... yes
> > checking fcntl.h presence... yes
> > checking for fcntl.h... yes
> > checking limits.h usability... yes
> > checking limits.h presence... yes
> > checking for limits.h... yes
> > checking malloc.h usability... yes
> > checking malloc.h presence... yes
> > checking for malloc.h... yes
> > checking paths.h usability... yes
> > checking paths.h presence... yes
> > checking for paths.h... yes
> > checking for strings.h... (cached) yes
> > checking sys/file.h usability... yes
> > checking sys/file.h presence... yes
> > checking for sys/file.h... yes
> > checking sys/time.h usability... yes
> > checking sys/time.h presence... yes
> > checking for sys/time.h... yes
> > checking syslog.h usability... yes
> > checking syslog.h presence... yes
> > checking for syslog.h... yes
> > checking for unistd.h... (cached) yes
> > checking for inttypes.h... (cached) yes
> > checking sys/uio.h usability... yes
> > checking sys/uio.h presence... yes
> > checking for sys/uio.h... yes
> > checking sys/param.h usability... yes
> > checking sys/param.h presence... yes
> > checking for sys/param.h... yes
> > checking sysexits.h usability... yes
> > checking sysexits.h presence... yes
> > checking for sysexits.h... yes
> > checking stdarg.h usability... yes
> > checking stdarg.h presence... yes
> > checking for stdarg.h... yes
> > checking varargs.h usability... no
> > checking varargs.h presence... no
> > checking for varargs.h... no
> > checking whether you have ss_family in struct sockaddr_storage... yes
> > checking whether you have sa_len in struct sockaddr... no
> > checking for socklen_t... yes
> > checking for gethostname... yes
> > checking for getdomainname... yes
> > checking for getpwnam... yes
> > checking for getspnam... yes
> > checking for gettimeofday... yes
> > checking for inet_aton... yes
> > checking for memcpy... yes
> > checking for mkdir... yes
> > checking for select... yes
> > checking for socket... yes
> > checking for strchr... yes
> > checking for strdup... yes
> > checking for strerror... yes
> > checking for strspn... yes
> > checking for strstr... yes
> > checking for strtol... yes
> > checking for jrand48... yes
> > updating cache ./config.cache
> > configure: creating ./config.status
> > config.status: creating Makefile
> > config.status: creating include/Makefile
> > config.status: creating sasldb/Makefile
> > config.status: creating plugins/Makefile
> > config.status: creating lib/Makefile
> > config.status: creating utils/Makefile
> > config.status: creating doc/Makefile
> > config.status: creating sample/Makefile
> > config.status: creating java/Makefile
> > config.status: creating java/CyrusSasl/Makefile
> > config.status: creating java/Test/Makefile
> > config.status: creating java/javax/Makefile
> > config.status: creating java/javax/security/Makefile
> > config.status: creating java/javax/security/auth/Makefile
> > config.status: creating java/javax/security/auth/callback/Makefile
> > config.status: creating pwcheck/Makefile
> > config.status: creating man/Makefile
> > config.status: creating config.h
> > config.status: executing depfiles commands
> > configure: configuring in saslauthd
> > configure: running /bin/sh './configure' --prefix=/usr/local  
> > '--enable-gssapi=/usr/kerberos/include/' '--enable-static' 
> > '--without-des' '--without-openssl' 'CFLAGS=-O2' 
> > --cache-file=.././config.cache --srcdir=.
> > configure: loading cache .././config.cache
> > checking build system type... (cached) i686-pc-linux-gnu
> > checking host system type... (cached) i686-pc-linux-gnu
> > checking for a BSD-compatible install... (cached) /usr/bin/install -c
> > checking whether build environment is sane... yes
> > checking for gawk... (cached) gawk
> > checking whether make sets $(MAKE)... (cached) yes
> > checking for gcc... (cached) gcc
> > checking for C compiler default output... a.out
> > checking whether the C compiler works... yes
> > checking whether we are cross compiling... no
> > checking for suffix of executables...
> > checking for suffix of object files... (cached) o
> > checking whether we are using the GNU C compiler... (cached) yes
> > checking whether gcc accepts -g... (cached) yes
> > checking for gcc option to accept ANSI C... (cached) none needed
> > checking for style of include used by make... GNU
> > checking dependency style of gcc... (cached) gcc3
> > checking how to run the C preprocessor... (cached) gcc -E
> > checking for gawk... (cached) gawk
> > checking whether make sets $(MAKE)... (cached) yes
> > checking whether ln -s works... yes
> > checking for a BSD-compatible install... /usr/bin/install -c
> > checking for __attribute__... (cached) yes
> > checking for runpath switch... -Wl,-rpath,
> > checking for connect... (cached) yes
> > checking for res_search... (cached) no
> > checking for res_search in -lresolv... (cached) yes
> > checking for dn_expand... (cached) yes
> > checking for dns_lookup... (cached) no
> > checking for egrep... (cached) grep -E
> > checking for ANSI C header files... (cached) yes
> > checking for sys/types.h... (cached) yes
> > checking for sys/stat.h... (cached) yes
> > checking for stdlib.h... (cached) yes
> > checking for string.h... (cached) yes
> > checking for memory.h... (cached) yes
> > checking for strings.h... (cached) yes
> > checking for inttypes.h... (cached) yes
> > checking for stdint.h... (cached) yes
> > checking for unistd.h... (cached) yes
> > checking for OpenSSL... no
> > checking KERBEROS_V4... disabled
> > checking for crypt... (cached) no
> > checking for crypt in -lcrypt... (cached) yes
> > checking for gssapi.h... (cached) no
> > checking for gssapi/gssapi.h... (cached) no
> > configure: WARNING: Disabling GSSAPI - no include files found
> > checking GSSAPI... disabled
> > checking for crypt... (cached) no
> > checking for crypt in -lcrypt... (cached) yes
> > checking for pam_start in -lpam... (cached) no
> > checking for PAM support... no
> > checking for inet_aton in -lresolv... (cached) yes
> > checking to include LDAP support... no
> > checking for ANSI C header files... (cached) yes
> > checking for sys/wait.h that is POSIX.1 compatible... (cached) yes
> > checking whether time.h and sys/time.h may both be included... 
> > (cached) yes
> > checking crypt.h usability... yes
> > checking crypt.h presence... yes
> > checking for crypt.h... yes
> > checking for fcntl.h... (cached) yes
> > checking krb5.h usability... no
> > checking krb5.h presence... no
> > checking for krb5.h... no
> > checking for strings.h... (cached) yes
> > checking for syslog.h... (cached) yes
> > checking for unistd.h... (cached) yes
> > checking for sys/time.h... (cached) yes
> > checking for sys/uio.h... (cached) yes
> > checking for an ANSI C-conforming const... (cached) yes
> > checking for pid_t... (cached) yes
> > checking whether gcc implements __func__... yes
> > checking return type of signal handlers... (cached) void
> > checking for gethostname... (cached) yes
> > checking for mkdir... (cached) yes
> > checking for socket... (cached) yes
> > checking for strdup... (cached) yes
> > checking for getspnam... (cached) yes
> > checking for strlcat... no
> > checking for strlcpy... no
> > checking for getaddrinfo... (cached) yes
> > checking for getnameinfo... (cached) yes
> > checking whether you have ss_family in struct sockaddr_storage... 
> > (cached) yes
> > checking whether you have sa_len in struct sockaddr... (cached) no
> > checking for socklen_t... (cached) yes
> > updating cache .././config.cache
> > configure: creating ./config.status
> > config.status: creating Makefile
> > config.status: creating saslauthd.h
> > config.status: executing depfiles commands
> > Configuration Complete. Type 'make' to build.
> > [root@genie cyrus-sasl-2.1.20]# make
> > make  all-recursive
> > make[1]: Entering directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> > Making all in include
> > make[2]: Entering directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
> > if gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -W -O2 -MT makemd5.o 
> > -MD -MP -MF ".deps/makemd5.Tpo" \
> >  -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \
> > then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \
> > else rm -f ".deps/makemd5.Tpo"; exit 1; \
> > fi
> > /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o makemd5  
> > makemd5.o  -lresolv
> > mkdir .libs
> > gcc -Wall -W -O2 -o makemd5 makemd5.o -lresolv
> > rm -f md5global.h
> > ./makemd5 md5global.h
> > make[2]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
> > Making all in sasldb
> > make[2]: Entering directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb'
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../include     -Wall -W -O2 -MT allockey.lo -MD -MP 
> > -MF ".deps/allockey.Tpo" \
> >  -c -o allockey.lo `test -f 'allockey.c' || echo './'`allockey.c; \
> > then mv ".deps/allockey.Tpo" ".deps/allockey.Plo"; \
> > else rm -f ".deps/allockey.Tpo"; exit 1; \
> > fi
> > mkdir .libs
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W 
> > -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c  
> > -fPIC -DPIC -o .libs/allockey.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W 
> > -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c -o 
> > allockey.o >/dev/null 2>&1
> > mv -f .libs/allockey.lo allockey.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../include     -Wall -W -O2 -MT db_none.lo -MD -MP -MF 
> > ".deps/db_none.Tpo" \
> >  -c -o db_none.lo `test -f 'db_none.c' || echo './'`db_none.c; \
> > then mv ".deps/db_none.Tpo" ".deps/db_none.Plo"; \
> > else rm -f ".deps/db_none.Tpo"; exit 1; \
> > fi
> > rm -f .libs/db_none.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W 
> > -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c  -fPIC 
> > -DPIC -o .libs/db_none.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W 
> > -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -o 
> > db_none.o  >/dev/null 2>&1
> > mv -f .libs/db_none.lo db_none.lo
> > /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o libsasldb.la   
> > allockey.lo db_none.lo  -lresolv
> > rm -fr .libs/libsasldb.la .libs/libsasldb.* .libs/libsasldb.*
> > ar cru .libs/libsasldb.al allockey.lo db_none.lo
> > ranlib .libs/libsasldb.al
> > creating libsasldb.la
> > (cd .libs && rm -f libsasldb.la && ln -s ../libsasldb.la
> libsasldb.la)
> > ar cru .libs/libsasldb.a db_none.o
> > make[2]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb'
> > Making all in plugins
> > make[2]: Entering directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins'
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
> > cram.lo -MD -MP -MF ".deps/cram.Tpo" \
> >  -c -o cram.lo `test -f 'cram.c' || echo './'`cram.c; \
> > then mv ".deps/cram.Tpo" ".deps/cram.Plo"; \
> > else rm -f ".deps/cram.Tpo"; exit 1; \
> > fi
> > mkdir .libs
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c 
> > cram.c  -fPIC -DPIC -o .libs/cram.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c 
> > cram.c -o cram.o >/dev/null 2>&1
> > mv -f .libs/cram.lo cram.lo
> > /bin/sh ./makeinit.sh
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
> > crammd5_init.lo -MD -MP -MF ".deps/crammd5_init.Tpo" \
> >  -c -o crammd5_init.lo `test -f 'crammd5_init.c' || echo 
> > './'`crammd5_init.c; \
> > then mv ".deps/crammd5_init.Tpo" ".deps/crammd5_init.Plo"; \
> > else rm -f ".deps/crammd5_init.Tpo"; exit 1; \
> > fi
> > rm -f .libs/crammd5_init.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF 
> > .deps/crammd5_init.Tpo -c crammd5_init.c  -fPIC -DPIC -o 
> > .libs/crammd5_init.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF 
> > .deps/crammd5_init.Tpo -c crammd5_init.c -o crammd5_init.o >/dev/null 
> > 2>&1
> > mv -f .libs/crammd5_init.lo crammd5_init.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
> > plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \
> >  -c -o plugin_common.lo `test -f 'plugin_common.c' || echo 
> > './'`plugin_common.c; \
> > then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \
> > else rm -f ".deps/plugin_common.Tpo"; exit 1; \
> > fi
> > rm -f .libs/plugin_common.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
> > .deps/plugin_common.Tpo -c plugin_common.c  -fPIC -DPIC -o 
> > .libs/plugin_common.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
> > .deps/plugin_common.Tpo -c plugin_common.c -o plugin_common.o 
> > >/dev/null 2>&1
> > mv -f .libs/plugin_common.lo plugin_common.lo
> > /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module 
> > -export-dynamic -rpath /usr/lib/sasl2  -o libcrammd5.la  
> > -version-info 2:20:0 cram.lo crammd5_init.lo plugin_common.lo  -lresolv
> > rm -fr .libs/libcrammd5.la .libs/libcrammd5.* .libs/libcrammd5.*
> > gcc -shared  cram.lo crammd5_init.lo plugin_common.lo  -lresolv -lc  
> > -Wl,-soname -Wl,libcrammd5.so.2 -o .libs/libcrammd5.so.2.0.20
> > (cd .libs && rm -f libcrammd5.so.2 && ln -s libcrammd5.so.2.0.20 
> > libcrammd5.so.2)
> > (cd .libs && rm -f libcrammd5.so && ln -s libcrammd5.so.2.0.20 
> > libcrammd5.so)
> > ar cru .libs/libcrammd5.a  cram.o crammd5_init.o plugin_common.o
> > ranlib .libs/libcrammd5.a
> > creating libcrammd5.la
> > (cd .libs && rm -f libcrammd5.la && ln -s ../libcrammd5.la 
> > libcrammd5.la)
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
> > digestmd5.lo -MD -MP -MF ".deps/digestmd5.Tpo" \
> >  -c -o digestmd5.lo `test -f 'digestmd5.c' || echo './'`digestmd5.c;
> \
> > then mv ".deps/digestmd5.Tpo" ".deps/digestmd5.Plo"; \
> > else rm -f ".deps/digestmd5.Tpo"; exit 1; \
> > fi
> > rm -f .libs/digestmd5.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF 
> > .deps/digestmd5.Tpo -c digestmd5.c  -fPIC -DPIC -o .libs/digestmd5.lo
> > digestmd5.c: In function `digestmd5_server_mech_step2':
> > digestmd5.c:2093: warning: dereferencing type-punned pointer will 
> > break strict-aliasing rules
> > digestmd5.c:2110: warning: dereferencing type-punned pointer will 
> > break strict-aliasing rules
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF 
> > .deps/digestmd5.Tpo -c digestmd5.c -o digestmd5.o >/dev/null 2>&1
> > mv -f .libs/digestmd5.lo digestmd5.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
> > digestmd5_init.lo -MD -MP -MF ".deps/digestmd5_init.Tpo" \
> >  -c -o digestmd5_init.lo `test -f 'digestmd5_init.c' || echo 
> > './'`digestmd5_init.c; \
> > then mv ".deps/digestmd5_init.Tpo" ".deps/digestmd5_init.Plo"; \
> > else rm -f ".deps/digestmd5_init.Tpo"; exit 1; \
> > fi
> > rm -f .libs/digestmd5_init.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF 
> > .deps/digestmd5_init.Tpo -c digestmd5_init.c  -fPIC -DPIC -o 
> > .libs/digestmd5_init.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF 
> > .deps/digestmd5_init.Tpo -c digestmd5_init.c -o digestmd5_init.o 
> >  >/dev/null 2>&1
> > mv -f .libs/digestmd5_init.lo digestmd5_init.lo
> > /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module 
> > -export-dynamic -rpath /usr/lib/sasl2  -o libdigestmd5.la  
> > -version-info 2:20:0 digestmd5.lo digestmd5_init.lo plugin_common.lo  
> > -lresolv   -lresolv
> > rm -fr .libs/libdigestmd5.la .libs/libdigestmd5.* .libs/libdigestmd5.*
> > gcc -shared  digestmd5.lo digestmd5_init.lo plugin_common.lo  
> > -lresolv -lresolv -lc  -Wl,-soname -Wl,libdigestmd5.so.2 -o 
> > .libs/libdigestmd5.so.2.0.20
> > (cd .libs && rm -f libdigestmd5.so.2 && ln -s libdigestmd5.so.2.0.20
>
> > libdigestmd5.so.2)
> > (cd .libs && rm -f libdigestmd5.so && ln -s libdigestmd5.so.2.0.20 
> > libdigestmd5.so)
> > ar cru .libs/libdigestmd5.a  digestmd5.o digestmd5_init.o 
> > plugin_common.o
> > ranlib .libs/libdigestmd5.a
> > creating libdigestmd5.la
> > (cd .libs && rm -f libdigestmd5.la && ln -s ../libdigestmd5.la 
> > libdigestmd5.la)
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
> > plain.lo -MD -MP -MF ".deps/plain.Tpo" \
> >  -c -o plain.lo `test -f 'plain.c' || echo './'`plain.c; \
> > then mv ".deps/plain.Tpo" ".deps/plain.Plo"; \
> > else rm -f ".deps/plain.Tpo"; exit 1; \
> > fi
> > rm -f .libs/plain.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo -c 
> > plain.c  -fPIC -DPIC -o .libs/plain.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo -c 
> > plain.c -o plain.o >/dev/null 2>&1
> > mv -f .libs/plain.lo plain.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
> > plain_init.lo -MD -MP -MF ".deps/plain_init.Tpo" \
> >  -c -o plain_init.lo `test -f 'plain_init.c' || echo 
> > './'`plain_init.c; \
> > then mv ".deps/plain_init.Tpo" ".deps/plain_init.Plo"; \
> > else rm -f ".deps/plain_init.Tpo"; exit 1; \
> > fi
> > rm -f .libs/plain_init.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF 
> > .deps/plain_init.Tpo -c plain_init.c  -fPIC -DPIC -o .libs/plain_init.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF 
> > .deps/plain_init.Tpo -c plain_init.c -o plain_init.o >/dev/null 2>&1
> > mv -f .libs/plain_init.lo plain_init.lo
> > /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module 
> > -export-dynamic -rpath /usr/lib/sasl2  -o libplain.la  -version-info 
> > 2:20:0 plain.lo plain_init.lo plugin_common.lo -lcrypt  -lresolv
> > rm -fr .libs/libplain.la .libs/libplain.* .libs/libplain.*
> > gcc -shared  plain.lo plain_init.lo plugin_common.lo  -lcrypt 
> > -lresolv -lc  -Wl,-soname -Wl,libplain.so.2 -o .libs/libplain.so.2.0.20
> > (cd .libs && rm -f libplain.so.2 && ln -s libplain.so.2.0.20 
> > libplain.so.2)
> > (cd .libs && rm -f libplain.so && ln -s libplain.so.2.0.20
> libplain.so)
> > ar cru .libs/libplain.a  plain.o plain_init.o plugin_common.o
> > ranlib .libs/libplain.a
> > creating libplain.la
> > (cd .libs && rm -f libplain.la && ln -s ../libplain.la libplain.la)
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
> > anonymous.lo -MD -MP -MF ".deps/anonymous.Tpo" \
> >  -c -o anonymous.lo `test -f 'anonymous.c' || echo './'`anonymous.c;
> \
> > then mv ".deps/anonymous.Tpo" ".deps/anonymous.Plo"; \
> > else rm -f ".deps/anonymous.Tpo"; exit 1; \
> > fi
> > rm -f .libs/anonymous.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF 
> > .deps/anonymous.Tpo -c anonymous.c  -fPIC -DPIC -o .libs/anonymous.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF 
> > .deps/anonymous.Tpo -c anonymous.c -o anonymous.o >/dev/null 2>&1
> > mv -f .libs/anonymous.lo anonymous.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 -MT 
> > anonymous_init.lo -MD -MP -MF ".deps/anonymous_init.Tpo" \
> >  -c -o anonymous_init.lo `test -f 'anonymous_init.c' || echo 
> > './'`anonymous_init.c; \
> > then mv ".deps/anonymous_init.Tpo" ".deps/anonymous_init.Plo"; \
> > else rm -f ".deps/anonymous_init.Tpo"; exit 1; \
> > fi
> > rm -f .libs/anonymous_init.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF 
> > .deps/anonymous_init.Tpo -c anonymous_init.c  -fPIC -DPIC -o 
> > .libs/anonymous_init.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> > -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF 
> > .deps/anonymous_init.Tpo -c anonymous_init.c -o anonymous_init.o 
> >  >/dev/null 2>&1
> > mv -f .libs/anonymous_init.lo anonymous_init.lo
> > /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module 
> > -export-dynamic -rpath /usr/lib/sasl2  -o libanonymous.la  
> > -version-info 2:20:0 anonymous.lo anonymous_init.lo plugin_common.lo  
> > -lresolv
> > rm -fr .libs/libanonymous.la .libs/libanonymous.* .libs/libanonymous.*
> > gcc -shared  anonymous.lo anonymous_init.lo plugin_common.lo  
> > -lresolv -lc  -Wl,-soname -Wl,libanonymous.so.2 -o 
> > .libs/libanonymous.so.2.0.20
> > (cd .libs && rm -f libanonymous.so.2 && ln -s libanonymous.so.2.0.20
>
> > libanonymous.so.2)
> > (cd .libs && rm -f libanonymous.so && ln -s libanonymous.so.2.0.20 
> > libanonymous.so)
> > ar cru .libs/libanonymous.a  anonymous.o anonymous_init.o 
> > plugin_common.o
> > ranlib .libs/libanonymous.a
> > creating libanonymous.la
> > (cd .libs && rm -f libanonymous.la && ln -s ../libanonymous.la 
> > libanonymous.la)
> > make[2]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins'
> > Making all in lib
> > make[2]: Entering directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib'
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT auxprop.lo 
> > -MD -MP -MF ".deps/auxprop.Tpo" \
> >  -c -o auxprop.lo `test -f 'auxprop.c' || echo './'`auxprop.c; \
> > then mv ".deps/auxprop.Tpo" ".deps/auxprop.Plo"; \
> > else rm -f ".deps/auxprop.Tpo"; exit 1; \
> > fi
> > mkdir .libs
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF 
> > .deps/auxprop.Tpo -c auxprop.c  -fPIC -DPIC -o .libs/auxprop.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF 
> > .deps/auxprop.Tpo -c auxprop.c -o auxprop.o >/dev/null 2>&1
> > mv -f .libs/auxprop.lo auxprop.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> > canonusr.lo -MD -MP -MF ".deps/canonusr.Tpo" \
> >  -c -o canonusr.lo `test -f 'canonusr.c' || echo './'`canonusr.c; \
> > then mv ".deps/canonusr.Tpo" ".deps/canonusr.Plo"; \
> > else rm -f ".deps/canonusr.Tpo"; exit 1; \
> > fi
> > rm -f .libs/canonusr.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF 
> > .deps/canonusr.Tpo -c canonusr.c  -fPIC -DPIC -o .libs/canonusr.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF 
> > .deps/canonusr.Tpo -c canonusr.c -o canonusr.o >/dev/null 2>&1
> > mv -f .libs/canonusr.lo canonusr.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT checkpw.lo 
> > -MD -MP -MF ".deps/checkpw.Tpo" \
> >  -c -o checkpw.lo `test -f 'checkpw.c' || echo './'`checkpw.c; \
> > then mv ".deps/checkpw.Tpo" ".deps/checkpw.Plo"; \
> > else rm -f ".deps/checkpw.Tpo"; exit 1; \
> > fi
> > rm -f .libs/checkpw.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF 
> > .deps/checkpw.Tpo -c checkpw.c  -fPIC -DPIC -o .libs/checkpw.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF 
> > .deps/checkpw.Tpo -c checkpw.c -o checkpw.o >/dev/null 2>&1
> > mv -f .libs/checkpw.lo checkpw.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT client.lo 
> > -MD -MP -MF ".deps/client.Tpo" \
> >  -c -o client.lo `test -f 'client.c' || echo './'`client.c; \
> > then mv ".deps/client.Tpo" ".deps/client.Plo"; \
> > else rm -f ".deps/client.Tpo"; exit 1; \
> > fi
> > rm -f .libs/client.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo 
> > -c client.c  -fPIC -DPIC -o .libs/client.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo 
> > -c client.c -o client.o >/dev/null 2>&1
> > mv -f .libs/client.lo client.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT common.lo 
> > -MD -MP -MF ".deps/common.Tpo" \
> >  -c -o common.lo `test -f 'common.c' || echo './'`common.c; \
> > then mv ".deps/common.Tpo" ".deps/common.Plo"; \
> > else rm -f ".deps/common.Tpo"; exit 1; \
> > fi
> > rm -f .libs/common.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo 
> > -c common.c  -fPIC -DPIC -o .libs/common.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo 
> > -c common.c -o common.o >/dev/null 2>&1
> > mv -f .libs/common.lo common.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT config.lo 
> > -MD -MP -MF ".deps/config.Tpo" \
> >  -c -o config.lo `test -f 'config.c' || echo './'`config.c; \
> > then mv ".deps/config.Tpo" ".deps/config.Plo"; \
> > else rm -f ".deps/config.Tpo"; exit 1; \
> > fi
> > rm -f .libs/config.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo 
> > -c config.c  -fPIC -DPIC -o .libs/config.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo 
> > -c config.c -o config.o >/dev/null 2>&1
> > mv -f .libs/config.lo config.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> > external.lo -MD -MP -MF ".deps/external.Tpo" \
> >  -c -o external.lo `test -f 'external.c' || echo './'`external.c; \
> > then mv ".deps/external.Tpo" ".deps/external.Plo"; \
> > else rm -f ".deps/external.Tpo"; exit 1; \
> > fi
> > rm -f .libs/external.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF 
> > .deps/external.Tpo -c external.c  -fPIC -DPIC -o .libs/external.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF 
> > .deps/external.Tpo -c external.c -o external.o >/dev/null 2>&1
> > mv -f .libs/external.lo external.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT md5.lo -MD 
> > -MP -MF ".deps/md5.Tpo" \
> >  -c -o md5.lo `test -f 'md5.c' || echo './'`md5.c; \
> > then mv ".deps/md5.Tpo" ".deps/md5.Plo"; \
> > else rm -f ".deps/md5.Tpo"; exit 1; \
> > fi
> > rm -f .libs/md5.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c 
> > md5.c  -fPIC -DPIC -o .libs/md5.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c 
> > md5.c -o md5.o  >/dev/null 2>&1
> > mv -f .libs/md5.lo md5.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> > saslutil.lo -MD -MP -MF ".deps/saslutil.Tpo" \
> >  -c -o saslutil.lo `test -f 'saslutil.c' || echo './'`saslutil.c; \
> > then mv ".deps/saslutil.Tpo" ".deps/saslutil.Plo"; \
> > else rm -f ".deps/saslutil.Tpo"; exit 1; \
> > fi
> > rm -f .libs/saslutil.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF 
> > .deps/saslutil.Tpo -c saslutil.c  -fPIC -DPIC -o .libs/saslutil.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF 
> > .deps/saslutil.Tpo -c saslutil.c -o saslutil.o >/dev/null 2>&1
> > mv -f .libs/saslutil.lo saslutil.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT server.lo 
> > -MD -MP -MF ".deps/server.Tpo" \
> >  -c -o server.lo `test -f 'server.c' || echo './'`server.c; \
> > then mv ".deps/server.Tpo" ".deps/server.Plo"; \
> > else rm -f ".deps/server.Tpo"; exit 1; \
> > fi
> > rm -f .libs/server.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo 
> > -c server.c  -fPIC -DPIC -o .libs/server.lo
> > server.c: In function `sasl_setpass':
> > server.c:151: warning: dereferencing type-punned pointer will break 
> > strict-aliasing rules
> > server.c: In function `sasl_server_start':
> > server.c:1245: warning: dereferencing type-punned pointer will break 
> > strict-aliasing rules
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo 
> > -c server.c -o server.o >/dev/null 2>&1
> > mv -f .libs/server.lo server.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> > seterror.lo -MD -MP -MF ".deps/seterror.Tpo" \
> >  -c -o seterror.lo `test -f 'seterror.c' || echo './'`seterror.c; \
> > then mv ".deps/seterror.Tpo" ".deps/seterror.Plo"; \
> > else rm -f ".deps/seterror.Tpo"; exit 1; \
> > fi
> > rm -f .libs/seterror.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF 
> > .deps/seterror.Tpo -c seterror.c  -fPIC -DPIC -o .libs/seterror.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF 
> > .deps/seterror.Tpo -c seterror.c -o seterror.o >/dev/null 2>&1
> > mv -f .libs/seterror.lo seterror.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT dlopen.lo 
> > -MD -MP -MF ".deps/dlopen.Tpo" \
> >  -c -o dlopen.lo `test -f 'dlopen.c' || echo './'`dlopen.c; \
> > then mv ".deps/dlopen.Tpo" ".deps/dlopen.Plo"; \
> > else rm -f ".deps/dlopen.Tpo"; exit 1; \
> > fi
> > rm -f .libs/dlopen.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo 
> > -c dlopen.c  -fPIC -DPIC -o .libs/dlopen.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo 
> > -c dlopen.c -o dlopen.o >/dev/null 2>&1
> > mv -f .libs/dlopen.lo dlopen.lo
> > if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. 
> > -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> > plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \
> >  -c -o plugin_common.lo `test -f '../plugins/plugin_common.c' || echo 
> > './'`../plugins/plugin_common.c; \
> > then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo"; \
> > else rm -f ".deps/plugin_common.Tpo"; exit 1; \
> > fi
> > rm -f .libs/plugin_common.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
> > .deps/plugin_common.Tpo -c ../plugins/plugin_common.c  -fPIC -DPIC -o 
> > .libs/plugin_common.lo
> > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
> > .deps/plugin_common.Tpo -c ../plugins/plugin_common.c -o 
> > plugin_common.o >/dev/null 2>&1
> > mv -f .libs/plugin_common.lo plugin_common.lo
> > /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o libsasl2.la 
> > -rpath /usr/local/lib -version-info 2:20:0 auxprop.lo canonusr.lo 
> > checkpw.lo client.lo common.lo config.lo external.lo md5.lo 
> > saslutil.lo server.lo seterror.lo dlopen.lo plugin_common.lo   -ldl 
> > -lresolv   -lresolv
> > rm -fr .libs/libsasl2.la .libs/libsasl2.* .libs/libsasl2.*
> > gcc -shared  auxprop.lo canonusr.lo checkpw.lo client.lo common.lo 
> > config.lo external.lo md5.lo saslutil.lo server.lo seterror.lo 
> > dlopen.lo plugin_common.lo  -ldl -lresolv -lresolv -lc  -Wl,-soname 
> > -Wl,libsasl2.so.2 -o .libs/libsasl2.so.2.0.20
> > (cd .libs && rm -f libsasl2.so.2 && ln -s libsasl2.so.2.0.20 
> > libsasl2.so.2)
> > (cd .libs && rm -f libsasl2.so && ln -s libsasl2.so.2.0.20
> libsasl2.so)
> > ar cru .libs/libsasl2.a  auxprop.o canonusr.o checkpw.o client.o 
> > common.o config.o external.o md5.o saslutil.o server.o seterror.o 
> > dlopen.o plugin_common.o
> > ranlib .libs/libsasl2.a
> > creating libsasl2.la
> > (cd .libs && rm -f libsasl2.la && ln -s ../libsasl2.la libsasl2.la)
> > if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> > -I../include    -Wall -W -O2 -MT ../plugins/sasldb.o -MD -MP -MF 
> > ".deps/../plugins/sasldb.Tpo" \
> >  -c -o ../plugins/sasldb.o `test -f '../plugins/sasldb.c' || echo 
> > './'`../plugins/sasldb.c; \
> > then mv ".deps/../plugins/sasldb.Tpo"
> ".deps/../plugins/sasldb.Po"; \
> > else rm -f ".deps/../plugins/sasldb.Tpo"; exit 1; \
> > fi
> > ../plugins/sasldb.c:129: fatal error: opening dependency file 
> > .deps/../plugins/sasldb.Tpo: No such file or directory
> > compilation terminated.
> > make[2]: *** [../plugins/sasldb.o] Error 1
> > make[2]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory 
> > `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> > make: *** [all] Error 2
> > [root@genie cyrus-sasl-2.1.20]#
> >
> > -- 
> > Fedora-directory-users mailing list
> > Fedora-directory-users(a)redhat.com
> > https://www.redhat.com/mailman/listinfo/fedora-directory-users
>
>
> ------------------------------------------------------------------------
>
> --
> Fedora-directory-users mailing list
> Fedora-directory-users(a)redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-directory-users
>   
>

[Jason Kullo Sam]

Holy cats...it worked! Cyrus is goin now...
And, db4-devel is the same name in FC3...yum is even nice enough to have it!

Nathan Kinder wrote:

>  In addition to what Rob mentioned below, your build is not finding
> the 
>  gssapi header files.  I checked on my FC3 machine, and the gssapi 
>  include location is /usr/include/gssapi.  You should change your 
>  configure line to have "--enable-gssapi=/usr/include/gssapi".
>
>  -NGK
>
>  Rob Crittenden wrote:
>
> > This info was great, thanks.
> >
> > My FC3 box is offline right now but I re-made my cyrus-sasl in RHEL 3 
> > and I noticed a few differences.
> >
> > One is when configure is checking for database support (db, ndbm, 
> > etc). It is found for me, not for you.
> >
> > Can you try installing db4-devel-4.1.25-8.1 (or whatever the 
> > equivalent is on FC3)?
> >
> > Another difference I saw is in pam_start in -lpam. I don't know if 
> > this is anything to worry about or not.
> >
> > rob
> >
> > Jason Kullo Sam wrote:
> >
> >> Noriko Hosoi wrote:
> >>
> >>> My cyrus sasl build creates a symbolic link to the lib directory 
> >>> like this.  Do you see it in your build log?
> >>>
> >>>> [...]
> >>>> adding static plugins and dependencies
> >>>> ar cru .libs/libsasl2.a ../plugins/sasldb.o 
> >>>> ../sasldb/db_berkeley.o ../sasldb/allockey.o ../plugins/cram.o 
> >>>> ../plugins/digestmd5.o ../plugins/gssapi.o ../plugins/plain.o 
> >>>> ../plugins/anonymous.o
> >>>> rm -f libsasl2.a
> >>>> *ln -s .libs/libsasl2.a libsasl2.a*
> >>>> gmake[2]: Leaving directory `/work/cyrus-sasl-2.1.20/lib'
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> --noriko
> >>>
> >>> Richard Megginson wrote:
> >>>
> >>>> There is still no libsasl2.a.  I'm not sure what the problem is.  
> >>>> Try using "make" instead of "gmake" - perhaps gmake
> is slightly 
> >>>> different on your OS/version?
> >>>>
> >> ===========================
> >> Answering both of these...
> >> I cleaned and blew up the directory again, and started over. Even 
> >> fixed a typo in the configure portion(apparently this typo allowed 
> >> it to finish before). The configureation was done, but the make 
> >> failed. It doesn't look like it ever even MAKES the libsasl2.a, 
> >> nevermind links it...
> >>
> >> Here's the whole shabang in case my noobness is leaving something 
> >> important out...
> >> =================================================================
> >> [root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf -
> >> tar: Read 2048 bytes from -
> >> [root@genie ds]# cd cyrus-sasl-2.1.20
> >> [root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure 
> >> --enable-gssapi=/usr/kerberos/include/ --enable-static --without-des 
> >> --without-openssl
> >> configure: creating cache ./config.cache
> >> checking build system type... i686-pc-linux-gnu
> >> checking host system type... i686-pc-linux-gnu
> >> checking target system type... i686-pc-linux-gnu
> >> checking for a BSD-compatible install... /usr/bin/install -c
> >> checking whether build environment is sane... yes
> >> checking for gawk... gawk
> >> checking whether make sets $(MAKE)... yes
> >> checking for gcc... gcc
> >> checking for C compiler default output... a.out
> >> checking whether the C compiler works... yes
> >> checking whether we are cross compiling... no
> >> checking for suffix of executables...
> >> checking for suffix of object files... o
> >> checking whether we are using the GNU C compiler... yes
> >> checking whether gcc accepts -g... yes
> >> checking for gcc option to accept ANSI C... none needed
> >> checking for style of include used by make... GNU
> >> checking dependency style of gcc... gcc3
> >> checking how to run the C preprocessor... gcc -E
> >> checking for gawk... (cached) gawk
> >> checking whether ln -s works... yes
> >> checking whether make sets $(MAKE)... (cached) yes
> >> checking for a BSD-compatible install... /usr/bin/install -c
> >> checking for __attribute__... yes
> >> checking for runpath switch... -Wl,-rpath,
> >> checking for ranlib... ranlib
> >> checking for ld used by GCC... /usr/bin/ld
> >> checking if the linker (/usr/bin/ld) is GNU ld... yes
> >> checking for BSD-compatible nm... /usr/bin/nm -B
> >> updating cache ./config.cache
> >> loading cache ./config.cache within ltconfig
> >> checking for object suffix... o
> >> checking for executable suffix... (cached)
> >> checking for gcc option to produce PIC... -fPIC
> >> checking if gcc PIC flag -fPIC works... yes
> >> checking if gcc supports -c -o file.o... yes
> >> checking if gcc supports -c -o file.lo... yes
> >> checking if gcc supports -fno-rtti -fno-exceptions ... no
> >> checking if gcc static flag -static works... -static
> >> checking if the linker (/usr/bin/ld) is GNU ld... yes
> >> checking whether the linker (/usr/bin/ld) supports shared 
> >> libraries... yes
> >> checking command to parse /usr/bin/nm -B output... ok
> >> checking how to hardcode library paths into programs... immediate
> >> checking for /usr/bin/ld option to reload object files... -r
> >> checking dynamic linker characteristics... Linux ld.so
> >> checking if libtool supports shared libraries... yes
> >> checking whether to build shared libraries... yes
> >> checking whether to build static libraries... yes
> >> checking for objdir... .libs
> >> creating libtool
> >> updating cache ./config.cache
> >> configure: loading cache ./config.cache
> >> checking for connect... yes
> >> checking for res_search... no
> >> checking for res_search in -lresolv... yes
> >> checking for dn_expand... yes
> >> checking for dns_lookup... no
> >> checking DB path to use... /etc/sasldb2
> >> checking for egrep... grep -E
> >> checking for ANSI C header files... yes
> >> checking for sys/types.h... yes
> >> checking for sys/stat.h... yes
> >> checking for stdlib.h... yes
> >> checking for string.h... yes
> >> checking for memory.h... yes
> >> checking for strings.h... yes
> >> checking for inttypes.h... yes
> >> checking for stdint.h... yes
> >> checking for unistd.h... yes
> >> checking db.h usability... no
> >> checking db.h presence... no
> >> checking for db.h... no
> >> checking ndbm.h usability... no
> >> checking ndbm.h presence... no
> >> checking for ndbm.h... no
> >> checking gdbm.h usability... no
> >> checking gdbm.h presence... no
> >> checking for gdbm.h... no
> >> checking DB library to use... no
> >> configure: WARNING: Disabling SASL authentication database support
> >> checking for dlopen in -ldl... yes
> >> checking /dev/random to use... /dev/random
> >> checking for nm... /usr/bin/nm -B
> >> checking for underscore before symbols... no
> >> checking for syslog... yes
> >> checking for pam_start in -lpam... no
> >> checking if I should include saslauthd... /var/state/saslauthd
> >> checking to include Courier authdaemond support... /dev/null
> >> checking if I should include pwcheck... no
> >> checking if I should include the alwaystrue verifier... no
> >> checking if we should enable sasl_checkapop... enabled
> >> checking CRAM-MD5... enabled
> >> checking for OpenSSL... no
> >> configure: WARNING: No DES support for DIGEST-MD5
> >> checking DIGEST-MD5... enabled
> >> configure: WARNING: OpenSSL not found -- OTP will be disabled
> >> checking OTP... disabled
> >> configure: WARNING: OpenSSL not found -- SRP will be disabled
> >> checking SRP... disabled
> >> checking KERBEROS_V4... disabled
> >> checking for crypt... no
> >> checking for crypt in -lcrypt... yes
> >> checking gssapi.h usability... no
> >> checking gssapi.h presence... no
> >> checking for gssapi.h... no
> >> checking gssapi/gssapi.h usability... no
> >> checking gssapi/gssapi.h presence... no
> >> checking for gssapi/gssapi.h... no
> >> configure: WARNING: Disabling GSSAPI - no include files found
> >> checking GSSAPI... disabled
> >> checking PLAIN... enabled
> >> checking ANONYMOUS... enabled
> >> checking LOGIN... disabled
> >> configure: WARNING: OpenSSL not found -- NTLM will be disabled
> >> checking NTLM... disabled
> >> checking SQL... disabled
> >> checking for dmalloc library... no
> >> checking for sfio library... no
> >> checking for getsubopt... yes
> >> checking for snprintf... yes
> >> checking for vsnprintf... yes
> >> checking for inet_aton in -lresolv... yes
> >> checking for getaddrinfo... yes
> >> checking for gai_strerror... yes
> >> checking for getnameinfo... yes
> >> checking for an ANSI C-conforming const... yes
> >> checking for inline... inline
> >> checking for mode_t... yes
> >> checking for pid_t... yes
> >> checking return type of signal handlers... void
> >> checking whether time.h and sys/time.h may both be included... yes
> >> checking for ANSI C header files... (cached) yes
> >> checking for dirent.h that defines DIR... yes
> >> checking for library containing opendir... none required
> >> checking for sys/wait.h that is POSIX.1 compatible... yes
> >> checking dlfcn.h usability... yes
> >> checking dlfcn.h presence... yes
> >> checking for dlfcn.h... yes
> >> checking fcntl.h usability... yes
> >> checking fcntl.h presence... yes
> >> checking for fcntl.h... yes
> >> checking limits.h usability... yes
> >> checking limits.h presence... yes
> >> checking for limits.h... yes
> >> checking malloc.h usability... yes
> >> checking malloc.h presence... yes
> >> checking for malloc.h... yes
> >> checking paths.h usability... yes
> >> checking paths.h presence... yes
> >> checking for paths.h... yes
> >> checking for strings.h... (cached) yes
> >> checking sys/file.h usability... yes
> >> checking sys/file.h presence... yes
> >> checking for sys/file.h... yes
> >> checking sys/time.h usability... yes
> >> checking sys/time.h presence... yes
> >> checking for sys/time.h... yes
> >> checking syslog.h usability... yes
> >> checking syslog.h presence... yes
> >> checking for syslog.h... yes
> >> checking for unistd.h... (cached) yes
> >> checking for inttypes.h... (cached) yes
> >> checking sys/uio.h usability... yes
> >> checking sys/uio.h presence... yes
> >> checking for sys/uio.h... yes
> >> checking sys/param.h usability... yes
> >> checking sys/param.h presence... yes
> >> checking for sys/param.h... yes
> >> checking sysexits.h usability... yes
> >> checking sysexits.h presence... yes
> >> checking for sysexits.h... yes
> >> checking stdarg.h usability... yes
> >> checking stdarg.h presence... yes
> >> checking for stdarg.h... yes
> >> checking varargs.h usability... no
> >> checking varargs.h presence... no
> >> checking for varargs.h... no
> >> checking whether you have ss_family in struct sockaddr_storage... yes
> >> checking whether you have sa_len in struct sockaddr... no
> >> checking for socklen_t... yes
> >> checking for gethostname... yes
> >> checking for getdomainname... yes
> >> checking for getpwnam... yes
> >> checking for getspnam... yes
> >> checking for gettimeofday... yes
> >> checking for inet_aton... yes
> >> checking for memcpy... yes
> >> checking for mkdir... yes
> >> checking for select... yes
> >> checking for socket... yes
> >> checking for strchr... yes
> >> checking for strdup... yes
> >> checking for strerror... yes
> >> checking for strspn... yes
> >> checking for strstr... yes
> >> checking for strtol... yes
> >> checking for jrand48... yes
> >> updating cache ./config.cache
> >> configure: creating ./config.status
> >> config.status: creating Makefile
> >> config.status: creating include/Makefile
> >> config.status: creating sasldb/Makefile
> >> config.status: creating plugins/Makefile
> >> config.status: creating lib/Makefile
> >> config.status: creating utils/Makefile
> >> config.status: creating doc/Makefile
> >> config.status: creating sample/Makefile
> >> config.status: creating java/Makefile
> >> config.status: creating java/CyrusSasl/Makefile
> >> config.status: creating java/Test/Makefile
> >> config.status: creating java/javax/Makefile
> >> config.status: creating java/javax/security/Makefile
> >> config.status: creating java/javax/security/auth/Makefile
> >> config.status: creating java/javax/security/auth/callback/Makefile
> >> config.status: creating pwcheck/Makefile
> >> config.status: creating man/Makefile
> >> config.status: creating config.h
> >> config.status: executing depfiles commands
> >> configure: configuring in saslauthd
> >> configure: running /bin/sh './configure' --prefix=/usr/local  
> >> '--enable-gssapi=/usr/kerberos/include/' '--enable-static' 
> >> '--without-des' '--without-openssl' 'CFLAGS=-O2' 
> >> --cache-file=.././config.cache --srcdir=.
> >> configure: loading cache .././config.cache
> >> checking build system type... (cached) i686-pc-linux-gnu
> >> checking host system type... (cached) i686-pc-linux-gnu
> >> checking for a BSD-compatible install... (cached) /usr/bin/install -c
> >> checking whether build environment is sane... yes
> >> checking for gawk... (cached) gawk
> >> checking whether make sets $(MAKE)... (cached) yes
> >> checking for gcc... (cached) gcc
> >> checking for C compiler default output... a.out
> >> checking whether the C compiler works... yes
> >> checking whether we are cross compiling... no
> >> checking for suffix of executables...
> >> checking for suffix of object files... (cached) o
> >> checking whether we are using the GNU C compiler... (cached) yes
> >> checking whether gcc accepts -g... (cached) yes
> >> checking for gcc option to accept ANSI C... (cached) none needed
> >> checking for style of include used by make... GNU
> >> checking dependency style of gcc... (cached) gcc3
> >> checking how to run the C preprocessor... (cached) gcc -E
> >> checking for gawk... (cached) gawk
> >> checking whether make sets $(MAKE)... (cached) yes
> >> checking whether ln -s works... yes
> >> checking for a BSD-compatible install... /usr/bin/install -c
> >> checking for __attribute__... (cached) yes
> >> checking for runpath switch... -Wl,-rpath,
> >> checking for connect... (cached) yes
> >> checking for res_search... (cached) no
> >> checking for res_search in -lresolv... (cached) yes
> >> checking for dn_expand... (cached) yes
> >> checking for dns_lookup... (cached) no
> >> checking for egrep... (cached) grep -E
> >> checking for ANSI C header files... (cached) yes
> >> checking for sys/types.h... (cached) yes
> >> checking for sys/stat.h... (cached) yes
> >> checking for stdlib.h... (cached) yes
> >> checking for string.h... (cached) yes
> >> checking for memory.h... (cached) yes
> >> checking for strings.h... (cached) yes
> >> checking for inttypes.h... (cached) yes
> >> checking for stdint.h... (cached) yes
> >> checking for unistd.h... (cached) yes
> >> checking for OpenSSL... no
> >> checking KERBEROS_V4... disabled
> >> checking for crypt... (cached) no
> >> checking for crypt in -lcrypt... (cached) yes
> >> checking for gssapi.h... (cached) no
> >> checking for gssapi/gssapi.h... (cached) no
> >> configure: WARNING: Disabling GSSAPI - no include files found
> >> checking GSSAPI... disabled
> >> checking for crypt... (cached) no
> >> checking for crypt in -lcrypt... (cached) yes
> >> checking for pam_start in -lpam... (cached) no
> >> checking for PAM support... no
> >> checking for inet_aton in -lresolv... (cached) yes
> >> checking to include LDAP support... no
> >> checking for ANSI C header files... (cached) yes
> >> checking for sys/wait.h that is POSIX.1 compatible... (cached) yes
> >> checking whether time.h and sys/time.h may both be included... 
> >> (cached) yes
> >> checking crypt.h usability... yes
> >> checking crypt.h presence... yes
> >> checking for crypt.h... yes
> >> checking for fcntl.h... (cached) yes
> >> checking krb5.h usability... no
> >> checking krb5.h presence... no
> >> checking for krb5.h... no
> >> checking for strings.h... (cached) yes
> >> checking for syslog.h... (cached) yes
> >> checking for unistd.h... (cached) yes
> >> checking for sys/time.h... (cached) yes
> >> checking for sys/uio.h... (cached) yes
> >> checking for an ANSI C-conforming const... (cached) yes
> >> checking for pid_t... (cached) yes
> >> checking whether gcc implements __func__... yes
> >> checking return type of signal handlers... (cached) void
> >> checking for gethostname... (cached) yes
> >> checking for mkdir... (cached) yes
> >> checking for socket... (cached) yes
> >> checking for strdup... (cached) yes
> >> checking for getspnam... (cached) yes
> >> checking for strlcat... no
> >> checking for strlcpy... no
> >> checking for getaddrinfo... (cached) yes
> >> checking for getnameinfo... (cached) yes
> >> checking whether you have ss_family in struct sockaddr_storage... 
> >> (cached) yes
> >> checking whether you have sa_len in struct sockaddr... (cached) no
> >> checking for socklen_t... (cached) yes
> >> updating cache .././config.cache
> >> configure: creating ./config.status
> >> config.status: creating Makefile
> >> config.status: creating saslauthd.h
> >> config.status: executing depfiles commands
> >> Configuration Complete. Type 'make' to build.
> >> [root@genie cyrus-sasl-2.1.20]# make
> >> make  all-recursive
> >> make[1]: Entering directory 
> >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> >> Making all in include
> >> make[2]: Entering directory 
> >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
> >> if gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -W -O2 -MT makemd5.o 
> >> -MD -MP -MF ".deps/makemd5.Tpo" \
> >>  -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c; \
> >> then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \
> >> else rm -f ".deps/makemd5.Tpo"; exit 1; \
> >> fi
> >> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o makemd5  
> >> makemd5.o  -lresolv
> >> mkdir .libs
> >> gcc -Wall -W -O2 -o makemd5 makemd5.o -lresolv
> >> rm -f md5global.h
> >> ./makemd5 md5global.h
> >> make[2]: Leaving directory 
> >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
> >> Making all in sasldb
> >> make[2]: Entering directory 
> >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb'
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../include     -Wall -W -O2 -MT allockey.lo -MD 
> >> -MP -MF ".deps/allockey.Tpo" \
> >>  -c -o allockey.lo `test -f 'allockey.c' || echo './'`allockey.c;
> \
> >> then mv ".deps/allockey.Tpo" ".deps/allockey.Plo"; \
> >> else rm -f ".deps/allockey.Tpo"; exit 1; \
> >> fi
> >> mkdir .libs
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W 
> >> -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c  
> >> -fPIC -DPIC -o .libs/allockey.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W 
> >> -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c -o 
> >> allockey.o >/dev/null 2>&1
> >> mv -f .libs/allockey.lo allockey.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../include     -Wall -W -O2 -MT db_none.lo -MD 
> >> -MP -MF ".deps/db_none.Tpo" \
> >>  -c -o db_none.lo `test -f 'db_none.c' || echo './'`db_none.c; \
> >> then mv ".deps/db_none.Tpo" ".deps/db_none.Plo"; \
> >> else rm -f ".deps/db_none.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/db_none.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W 
> >> -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c  -fPIC 
> >> -DPIC -o .libs/db_none.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W 
> >> -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -o 
> >> db_none.o  >/dev/null 2>&1
> >> mv -f .libs/db_none.lo db_none.lo
> >> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o libsasldb.la   
> >> allockey.lo db_none.lo  -lresolv
> >> rm -fr .libs/libsasldb.la .libs/libsasldb.* .libs/libsasldb.*
> >> ar cru .libs/libsasldb.al allockey.lo db_none.lo
> >> ranlib .libs/libsasldb.al
> >> creating libsasldb.la
> >> (cd .libs && rm -f libsasldb.la && ln -s ../libsasldb.la
> libsasldb.la)
> >> ar cru .libs/libsasldb.a db_none.o
> >> make[2]: Leaving directory 
> >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb'
> >> Making all in plugins
> >> make[2]: Entering directory 
> >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins'
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >> -MT cram.lo -MD -MP -MF ".deps/cram.Tpo" \
> >>  -c -o cram.lo `test -f 'cram.c' || echo './'`cram.c; \
> >> then mv ".deps/cram.Tpo" ".deps/cram.Plo"; \
> >> else rm -f ".deps/cram.Tpo"; exit 1; \
> >> fi
> >> mkdir .libs
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c 
> >> cram.c  -fPIC -DPIC -o .libs/cram.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c 
> >> cram.c -o cram.o >/dev/null 2>&1
> >> mv -f .libs/cram.lo cram.lo
> >> /bin/sh ./makeinit.sh
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >> -MT crammd5_init.lo -MD -MP -MF ".deps/crammd5_init.Tpo" \
> >>  -c -o crammd5_init.lo `test -f 'crammd5_init.c' || echo 
> >> './'`crammd5_init.c; \
> >> then mv ".deps/crammd5_init.Tpo" ".deps/crammd5_init.Plo"; \
> >> else rm -f ".deps/crammd5_init.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/crammd5_init.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF 
> >> .deps/crammd5_init.Tpo -c crammd5_init.c  -fPIC -DPIC -o 
> >> .libs/crammd5_init.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF 
> >> .deps/crammd5_init.Tpo -c crammd5_init.c -o crammd5_init.o 
> >> >/dev/null 2>&1
> >> mv -f .libs/crammd5_init.lo crammd5_init.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >> -MT plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \
> >>  -c -o plugin_common.lo `test -f 'plugin_common.c' || echo 
> >> './'`plugin_common.c; \
> >> then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo";
> \
> >> else rm -f ".deps/plugin_common.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/plugin_common.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
> >> .deps/plugin_common.Tpo -c plugin_common.c  -fPIC -DPIC -o 
> >> .libs/plugin_common.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
> >> .deps/plugin_common.Tpo -c plugin_common.c -o plugin_common.o 
> >> >/dev/null 2>&1
> >> mv -f .libs/plugin_common.lo plugin_common.lo
> >> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module 
> >> -export-dynamic -rpath /usr/lib/sasl2  -o libcrammd5.la  
> >> -version-info 2:20:0 cram.lo crammd5_init.lo plugin_common.lo  -lresolv
> >> rm -fr .libs/libcrammd5.la .libs/libcrammd5.* .libs/libcrammd5.*
> >> gcc -shared  cram.lo crammd5_init.lo plugin_common.lo  -lresolv -lc  
> >> -Wl,-soname -Wl,libcrammd5.so.2 -o .libs/libcrammd5.so.2.0.20
> >> (cd .libs && rm -f libcrammd5.so.2 && ln -s libcrammd5.so.2.0.20
>
> >> libcrammd5.so.2)
> >> (cd .libs && rm -f libcrammd5.so && ln -s libcrammd5.so.2.0.20 
> >> libcrammd5.so)
> >> ar cru .libs/libcrammd5.a  cram.o crammd5_init.o plugin_common.o
> >> ranlib .libs/libcrammd5.a
> >> creating libcrammd5.la
> >> (cd .libs && rm -f libcrammd5.la && ln -s ../libcrammd5.la 
> >> libcrammd5.la)
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >> -MT digestmd5.lo -MD -MP -MF ".deps/digestmd5.Tpo" \
> >>  -c -o digestmd5.lo `test -f 'digestmd5.c' || echo
> './'`digestmd5.c; \
> >> then mv ".deps/digestmd5.Tpo" ".deps/digestmd5.Plo"; \
> >> else rm -f ".deps/digestmd5.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/digestmd5.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF 
> >> .deps/digestmd5.Tpo -c digestmd5.c  -fPIC -DPIC -o .libs/digestmd5.lo
> >> digestmd5.c: In function `digestmd5_server_mech_step2':
> >> digestmd5.c:2093: warning: dereferencing type-punned pointer will 
> >> break strict-aliasing rules
> >> digestmd5.c:2110: warning: dereferencing type-punned pointer will 
> >> break strict-aliasing rules
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF 
> >> .deps/digestmd5.Tpo -c digestmd5.c -o digestmd5.o >/dev/null 2>&1
> >> mv -f .libs/digestmd5.lo digestmd5.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >> -MT digestmd5_init.lo -MD -MP -MF ".deps/digestmd5_init.Tpo" \
> >>  -c -o digestmd5_init.lo `test -f 'digestmd5_init.c' || echo 
> >> './'`digestmd5_init.c; \
> >> then mv ".deps/digestmd5_init.Tpo"
> ".deps/digestmd5_init.Plo"; \
> >> else rm -f ".deps/digestmd5_init.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/digestmd5_init.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF 
> >> .deps/digestmd5_init.Tpo -c digestmd5_init.c  -fPIC -DPIC -o 
> >> .libs/digestmd5_init.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF 
> >> .deps/digestmd5_init.Tpo -c digestmd5_init.c -o digestmd5_init.o 
> >>  >/dev/null 2>&1
> >> mv -f .libs/digestmd5_init.lo digestmd5_init.lo
> >> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module 
> >> -export-dynamic -rpath /usr/lib/sasl2  -o libdigestmd5.la  
> >> -version-info 2:20:0 digestmd5.lo digestmd5_init.lo 
> >> plugin_common.lo  -lresolv   -lresolv
> >> rm -fr .libs/libdigestmd5.la .libs/libdigestmd5.* .libs/libdigestmd5.*
> >> gcc -shared  digestmd5.lo digestmd5_init.lo plugin_common.lo  
> >> -lresolv -lresolv -lc  -Wl,-soname -Wl,libdigestmd5.so.2 -o 
> >> .libs/libdigestmd5.so.2.0.20
> >> (cd .libs && rm -f libdigestmd5.so.2 && ln -s
> libdigestmd5.so.2.0.20 
> >> libdigestmd5.so.2)
> >> (cd .libs && rm -f libdigestmd5.so && ln -s
> libdigestmd5.so.2.0.20 
> >> libdigestmd5.so)
> >> ar cru .libs/libdigestmd5.a  digestmd5.o digestmd5_init.o 
> >> plugin_common.o
> >> ranlib .libs/libdigestmd5.a
> >> creating libdigestmd5.la
> >> (cd .libs && rm -f libdigestmd5.la && ln -s ../libdigestmd5.la 
> >> libdigestmd5.la)
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >> -MT plain.lo -MD -MP -MF ".deps/plain.Tpo" \
> >>  -c -o plain.lo `test -f 'plain.c' || echo './'`plain.c; \
> >> then mv ".deps/plain.Tpo" ".deps/plain.Plo"; \
> >> else rm -f ".deps/plain.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/plain.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo 
> >> -c plain.c  -fPIC -DPIC -o .libs/plain.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo 
> >> -c plain.c -o plain.o >/dev/null 2>&1
> >> mv -f .libs/plain.lo plain.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >> -MT plain_init.lo -MD -MP -MF ".deps/plain_init.Tpo" \
> >>  -c -o plain_init.lo `test -f 'plain_init.c' || echo 
> >> './'`plain_init.c; \
> >> then mv ".deps/plain_init.Tpo" ".deps/plain_init.Plo"; \
> >> else rm -f ".deps/plain_init.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/plain_init.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF 
> >> .deps/plain_init.Tpo -c plain_init.c  -fPIC -DPIC -o 
> >> .libs/plain_init.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF 
> >> .deps/plain_init.Tpo -c plain_init.c -o plain_init.o >/dev/null 2>&1
> >> mv -f .libs/plain_init.lo plain_init.lo
> >> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module 
> >> -export-dynamic -rpath /usr/lib/sasl2  -o libplain.la  -version-info 
> >> 2:20:0 plain.lo plain_init.lo plugin_common.lo -lcrypt  -lresolv
> >> rm -fr .libs/libplain.la .libs/libplain.* .libs/libplain.*
> >> gcc -shared  plain.lo plain_init.lo plugin_common.lo  -lcrypt 
> >> -lresolv -lc  -Wl,-soname -Wl,libplain.so.2 -o .libs/libplain.so.2.0.20
> >> (cd .libs && rm -f libplain.so.2 && ln -s libplain.so.2.0.20 
> >> libplain.so.2)
> >> (cd .libs && rm -f libplain.so && ln -s libplain.so.2.0.20
> libplain.so)
> >> ar cru .libs/libplain.a  plain.o plain_init.o plugin_common.o
> >> ranlib .libs/libplain.a
> >> creating libplain.la
> >> (cd .libs && rm -f libplain.la && ln -s ../libplain.la
> libplain.la)
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >> -MT anonymous.lo -MD -MP -MF ".deps/anonymous.Tpo" \
> >>  -c -o anonymous.lo `test -f 'anonymous.c' || echo
> './'`anonymous.c; \
> >> then mv ".deps/anonymous.Tpo" ".deps/anonymous.Plo"; \
> >> else rm -f ".deps/anonymous.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/anonymous.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF 
> >> .deps/anonymous.Tpo -c anonymous.c  -fPIC -DPIC -o .libs/anonymous.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF 
> >> .deps/anonymous.Tpo -c anonymous.c -o anonymous.o >/dev/null 2>&1
> >> mv -f .libs/anonymous.lo anonymous.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >> -MT anonymous_init.lo -MD -MP -MF ".deps/anonymous_init.Tpo" \
> >>  -c -o anonymous_init.lo `test -f 'anonymous_init.c' || echo 
> >> './'`anonymous_init.c; \
> >> then mv ".deps/anonymous_init.Tpo"
> ".deps/anonymous_init.Plo"; \
> >> else rm -f ".deps/anonymous_init.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/anonymous_init.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF 
> >> .deps/anonymous_init.Tpo -c anonymous_init.c  -fPIC -DPIC -o 
> >> .libs/anonymous_init.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >> -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF 
> >> .deps/anonymous_init.Tpo -c anonymous_init.c -o anonymous_init.o 
> >>  >/dev/null 2>&1
> >> mv -f .libs/anonymous_init.lo anonymous_init.lo
> >> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module 
> >> -export-dynamic -rpath /usr/lib/sasl2  -o libanonymous.la  
> >> -version-info 2:20:0 anonymous.lo anonymous_init.lo 
> >> plugin_common.lo  -lresolv
> >> rm -fr .libs/libanonymous.la .libs/libanonymous.* .libs/libanonymous.*
> >> gcc -shared  anonymous.lo anonymous_init.lo plugin_common.lo  
> >> -lresolv -lc  -Wl,-soname -Wl,libanonymous.so.2 -o 
> >> .libs/libanonymous.so.2.0.20
> >> (cd .libs && rm -f libanonymous.so.2 && ln -s
> libanonymous.so.2.0.20 
> >> libanonymous.so.2)
> >> (cd .libs && rm -f libanonymous.so && ln -s
> libanonymous.so.2.0.20 
> >> libanonymous.so)
> >> ar cru .libs/libanonymous.a  anonymous.o anonymous_init.o 
> >> plugin_common.o
> >> ranlib .libs/libanonymous.a
> >> creating libanonymous.la
> >> (cd .libs && rm -f libanonymous.la && ln -s ../libanonymous.la 
> >> libanonymous.la)
> >> make[2]: Leaving directory 
> >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins'
> >> Making all in lib
> >> make[2]: Entering directory 
> >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib'
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> auxprop.lo -MD -MP -MF ".deps/auxprop.Tpo" \
> >>  -c -o auxprop.lo `test -f 'auxprop.c' || echo './'`auxprop.c; \
> >> then mv ".deps/auxprop.Tpo" ".deps/auxprop.Plo"; \
> >> else rm -f ".deps/auxprop.Tpo"; exit 1; \
> >> fi
> >> mkdir .libs
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF 
> >> .deps/auxprop.Tpo -c auxprop.c  -fPIC -DPIC -o .libs/auxprop.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF 
> >> .deps/auxprop.Tpo -c auxprop.c -o auxprop.o >/dev/null 2>&1
> >> mv -f .libs/auxprop.lo auxprop.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> canonusr.lo -MD -MP -MF ".deps/canonusr.Tpo" \
> >>  -c -o canonusr.lo `test -f 'canonusr.c' || echo './'`canonusr.c;
> \
> >> then mv ".deps/canonusr.Tpo" ".deps/canonusr.Plo"; \
> >> else rm -f ".deps/canonusr.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/canonusr.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF 
> >> .deps/canonusr.Tpo -c canonusr.c  -fPIC -DPIC -o .libs/canonusr.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF 
> >> .deps/canonusr.Tpo -c canonusr.c -o canonusr.o >/dev/null 2>&1
> >> mv -f .libs/canonusr.lo canonusr.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> checkpw.lo -MD -MP -MF ".deps/checkpw.Tpo" \
> >>  -c -o checkpw.lo `test -f 'checkpw.c' || echo './'`checkpw.c; \
> >> then mv ".deps/checkpw.Tpo" ".deps/checkpw.Plo"; \
> >> else rm -f ".deps/checkpw.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/checkpw.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF 
> >> .deps/checkpw.Tpo -c checkpw.c  -fPIC -DPIC -o .libs/checkpw.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF 
> >> .deps/checkpw.Tpo -c checkpw.c -o checkpw.o >/dev/null 2>&1
> >> mv -f .libs/checkpw.lo checkpw.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> client.lo -MD -MP -MF ".deps/client.Tpo" \
> >>  -c -o client.lo `test -f 'client.c' || echo './'`client.c; \
> >> then mv ".deps/client.Tpo" ".deps/client.Plo"; \
> >> else rm -f ".deps/client.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/client.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo 
> >> -c client.c  -fPIC -DPIC -o .libs/client.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo 
> >> -c client.c -o client.o >/dev/null 2>&1
> >> mv -f .libs/client.lo client.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> common.lo -MD -MP -MF ".deps/common.Tpo" \
> >>  -c -o common.lo `test -f 'common.c' || echo './'`common.c; \
> >> then mv ".deps/common.Tpo" ".deps/common.Plo"; \
> >> else rm -f ".deps/common.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/common.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo 
> >> -c common.c  -fPIC -DPIC -o .libs/common.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo 
> >> -c common.c -o common.o >/dev/null 2>&1
> >> mv -f .libs/common.lo common.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> config.lo -MD -MP -MF ".deps/config.Tpo" \
> >>  -c -o config.lo `test -f 'config.c' || echo './'`config.c; \
> >> then mv ".deps/config.Tpo" ".deps/config.Plo"; \
> >> else rm -f ".deps/config.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/config.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo 
> >> -c config.c  -fPIC -DPIC -o .libs/config.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo 
> >> -c config.c -o config.o >/dev/null 2>&1
> >> mv -f .libs/config.lo config.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> external.lo -MD -MP -MF ".deps/external.Tpo" \
> >>  -c -o external.lo `test -f 'external.c' || echo './'`external.c;
> \
> >> then mv ".deps/external.Tpo" ".deps/external.Plo"; \
> >> else rm -f ".deps/external.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/external.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF 
> >> .deps/external.Tpo -c external.c  -fPIC -DPIC -o .libs/external.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF 
> >> .deps/external.Tpo -c external.c -o external.o >/dev/null 2>&1
> >> mv -f .libs/external.lo external.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> md5.lo -MD -MP -MF ".deps/md5.Tpo" \
> >>  -c -o md5.lo `test -f 'md5.c' || echo './'`md5.c; \
> >> then mv ".deps/md5.Tpo" ".deps/md5.Plo"; \
> >> else rm -f ".deps/md5.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/md5.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c 
> >> md5.c  -fPIC -DPIC -o .libs/md5.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c 
> >> md5.c -o md5.o  >/dev/null 2>&1
> >> mv -f .libs/md5.lo md5.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> saslutil.lo -MD -MP -MF ".deps/saslutil.Tpo" \
> >>  -c -o saslutil.lo `test -f 'saslutil.c' || echo './'`saslutil.c;
> \
> >> then mv ".deps/saslutil.Tpo" ".deps/saslutil.Plo"; \
> >> else rm -f ".deps/saslutil.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/saslutil.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF 
> >> .deps/saslutil.Tpo -c saslutil.c  -fPIC -DPIC -o .libs/saslutil.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF 
> >> .deps/saslutil.Tpo -c saslutil.c -o saslutil.o >/dev/null 2>&1
> >> mv -f .libs/saslutil.lo saslutil.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> server.lo -MD -MP -MF ".deps/server.Tpo" \
> >>  -c -o server.lo `test -f 'server.c' || echo './'`server.c; \
> >> then mv ".deps/server.Tpo" ".deps/server.Plo"; \
> >> else rm -f ".deps/server.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/server.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo 
> >> -c server.c  -fPIC -DPIC -o .libs/server.lo
> >> server.c: In function `sasl_setpass':
> >> server.c:151: warning: dereferencing type-punned pointer will break 
> >> strict-aliasing rules
> >> server.c: In function `sasl_server_start':
> >> server.c:1245: warning: dereferencing type-punned pointer will break 
> >> strict-aliasing rules
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo 
> >> -c server.c -o server.o >/dev/null 2>&1
> >> mv -f .libs/server.lo server.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> seterror.lo -MD -MP -MF ".deps/seterror.Tpo" \
> >>  -c -o seterror.lo `test -f 'seterror.c' || echo './'`seterror.c;
> \
> >> then mv ".deps/seterror.Tpo" ".deps/seterror.Plo"; \
> >> else rm -f ".deps/seterror.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/seterror.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF 
> >> .deps/seterror.Tpo -c seterror.c  -fPIC -DPIC -o .libs/seterror.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF 
> >> .deps/seterror.Tpo -c seterror.c -o seterror.o >/dev/null 2>&1
> >> mv -f .libs/seterror.lo seterror.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> dlopen.lo -MD -MP -MF ".deps/dlopen.Tpo" \
> >>  -c -o dlopen.lo `test -f 'dlopen.c' || echo './'`dlopen.c; \
> >> then mv ".deps/dlopen.Tpo" ".deps/dlopen.Plo"; \
> >> else rm -f ".deps/dlopen.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/dlopen.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo 
> >> -c dlopen.c  -fPIC -DPIC -o .libs/dlopen.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo 
> >> -c dlopen.c -o dlopen.o >/dev/null 2>&1
> >> mv -f .libs/dlopen.lo dlopen.lo
> >> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >> plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \
> >>  -c -o plugin_common.lo `test -f '../plugins/plugin_common.c' || 
> >> echo './'`../plugins/plugin_common.c; \
> >> then mv ".deps/plugin_common.Tpo" ".deps/plugin_common.Plo";
> \
> >> else rm -f ".deps/plugin_common.Tpo"; exit 1; \
> >> fi
> >> rm -f .libs/plugin_common.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
> >> .deps/plugin_common.Tpo -c ../plugins/plugin_common.c  -fPIC -DPIC 
> >> -o .libs/plugin_common.lo
> >> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
> >> .deps/plugin_common.Tpo -c ../plugins/plugin_common.c -o 
> >> plugin_common.o >/dev/null 2>&1
> >> mv -f .libs/plugin_common.lo plugin_common.lo
> >> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o libsasl2.la 
> >> -rpath /usr/local/lib -version-info 2:20:0 auxprop.lo canonusr.lo 
> >> checkpw.lo client.lo common.lo config.lo external.lo md5.lo 
> >> saslutil.lo server.lo seterror.lo dlopen.lo plugin_common.lo   -ldl 
> >> -lresolv   -lresolv
> >> rm -fr .libs/libsasl2.la .libs/libsasl2.* .libs/libsasl2.*
> >> gcc -shared  auxprop.lo canonusr.lo checkpw.lo client.lo common.lo 
> >> config.lo external.lo md5.lo saslutil.lo server.lo seterror.lo 
> >> dlopen.lo plugin_common.lo  -ldl -lresolv -lresolv -lc  -Wl,-soname 
> >> -Wl,libsasl2.so.2 -o .libs/libsasl2.so.2.0.20
> >> (cd .libs && rm -f libsasl2.so.2 && ln -s libsasl2.so.2.0.20 
> >> libsasl2.so.2)
> >> (cd .libs && rm -f libsasl2.so && ln -s libsasl2.so.2.0.20
> libsasl2.so)
> >> ar cru .libs/libsasl2.a  auxprop.o canonusr.o checkpw.o client.o 
> >> common.o config.o external.o md5.o saslutil.o server.o seterror.o 
> >> dlopen.o plugin_common.o
> >> ranlib .libs/libsasl2.a
> >> creating libsasl2.la
> >> (cd .libs && rm -f libsasl2.la && ln -s ../libsasl2.la
> libsasl2.la)
> >> if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >> -I../include    -Wall -W -O2 -MT ../plugins/sasldb.o -MD -MP -MF 
> >> ".deps/../plugins/sasldb.Tpo" \
> >>  -c -o ../plugins/sasldb.o `test -f '../plugins/sasldb.c' || echo 
> >> './'`../plugins/sasldb.c; \
> >> then mv ".deps/../plugins/sasldb.Tpo"
> ".deps/../plugins/sasldb.Po"; \
> >> else rm -f ".deps/../plugins/sasldb.Tpo"; exit 1; \
> >> fi
> >> ../plugins/sasldb.c:129: fatal error: opening dependency file 
> >> .deps/../plugins/sasldb.Tpo: No such file or directory
> >> compilation terminated.
> >> make[2]: *** [../plugins/sasldb.o] Error 1
> >> make[2]: Leaving directory 
> >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib'
> >> make[1]: *** [all-recursive] Error 1
> >> make[1]: Leaving directory 
> >> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> >> make: *** [all] Error 2
> >> [root@genie cyrus-sasl-2.1.20]#
> >>
> >> -- 
> >> Fedora-directory-users mailing list
> >> Fedora-directory-users(a)redhat.com
> >> https://www.redhat.com/mailman/listinfo/fedora-directory-users
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > -- 
> > Fedora-directory-users mailing list
> > Fedora-directory-users(a)redhat.com
> > https://www.redhat.com/mailman/listinfo/fedora-directory-users
> >  
> >
>
> ------------------------------------------------------------------------
>
> --
> Fedora-directory-users mailing list
> Fedora-directory-users(a)redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-directory-users
>   
>

[Rob Crittenden]

Jason Kullo Sam wrote:
>  Holy cats...it worked! Cyrus is goin now...
>  And, db4-devel is the same name in FC3...yum is even nice enough to have 
>  it! 
Excellent news. I added this to the FAQ:
http://directory.fedora.redhat.com/wiki/FAQ#Failure_building_cyrus-sasl

rob

>  
>  Nathan Kinder wrote:
>  
> > In addition to what Rob mentioned below, your build is not finding the 
> > gssapi header files.  I checked on my FC3 machine, and the gssapi 
> > include location is /usr/include/gssapi.  You should change your 
> > configure line to have "--enable-gssapi=/usr/include/gssapi".
> >
> > -NGK
> >
> > Rob Crittenden wrote:
> >
> >> This info was great, thanks.
> >>
> >> My FC3 box is offline right now but I re-made my cyrus-sasl in RHEL 3 
> >> and I noticed a few differences.
> >>
> >> One is when configure is checking for database support (db, ndbm, 
> >> etc). It is found for me, not for you.
> >>
> >> Can you try installing db4-devel-4.1.25-8.1 (or whatever the 
> >> equivalent is on FC3)?
> >>
> >> Another difference I saw is in pam_start in -lpam. I don't know if 
> >> this is anything to worry about or not.
> >>
> >> rob
> >>
> >> Jason Kullo Sam wrote:
> >>
> >>> Noriko Hosoi wrote:
> >>>
> >>>> My cyrus sasl build creates a symbolic link to the lib directory 
> >>>> like this.  Do you see it in your build log?
> >>>>
> >>>>> [...]
> >>>>> adding static plugins and dependencies
> >>>>> ar cru .libs/libsasl2.a ../plugins/sasldb.o 
> >>>>> ../sasldb/db_berkeley.o ../sasldb/allockey.o ../plugins/cram.o 
> >>>>> ../plugins/digestmd5.o ../plugins/gssapi.o ../plugins/plain.o 
> >>>>> ../plugins/anonymous.o
> >>>>> rm -f libsasl2.a
> >>>>> *ln -s .libs/libsasl2.a libsasl2.a*
> >>>>> gmake[2]: Leaving directory `/work/cyrus-sasl-2.1.20/lib'
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> --noriko
> >>>>
> >>>> Richard Megginson wrote:
> >>>>
> >>>>> There is still no libsasl2.a.  I'm not sure what the problem is. 
>
> >>>>> Try using "make" instead of "gmake" - perhaps
> gmake is slightly 
> >>>>> different on your OS/version?
> >>>>>
> >>> ===========================
> >>> Answering both of these...
> >>> I cleaned and blew up the directory again, and started over. Even 
> >>> fixed a typo in the configure portion(apparently this typo allowed 
> >>> it to finish before). The configureation was done, but the make 
> >>> failed. It doesn't look like it ever even MAKES the libsasl2.a, 
> >>> nevermind links it...
> >>>
> >>> Here's the whole shabang in case my noobness is leaving something 
> >>> important out...
> >>> =================================================================
> >>> [root@genie ds]# gunzip -c cyrus-sasl-2.1.20.tar.gz | tar xf -
> >>> tar: Read 2048 bytes from -
> >>> [root@genie ds]# cd cyrus-sasl-2.1.20
> >>> [root@genie cyrus-sasl-2.1.20]# CFLAGS="-O2" ./configure 
> >>> --enable-gssapi=/usr/kerberos/include/ --enable-static --without-des 
> >>> --without-openssl
> >>> configure: creating cache ./config.cache
> >>> checking build system type... i686-pc-linux-gnu
> >>> checking host system type... i686-pc-linux-gnu
> >>> checking target system type... i686-pc-linux-gnu
> >>> checking for a BSD-compatible install... /usr/bin/install -c
> >>> checking whether build environment is sane... yes
> >>> checking for gawk... gawk
> >>> checking whether make sets $(MAKE)... yes
> >>> checking for gcc... gcc
> >>> checking for C compiler default output... a.out
> >>> checking whether the C compiler works... yes
> >>> checking whether we are cross compiling... no
> >>> checking for suffix of executables...
> >>> checking for suffix of object files... o
> >>> checking whether we are using the GNU C compiler... yes
> >>> checking whether gcc accepts -g... yes
> >>> checking for gcc option to accept ANSI C... none needed
> >>> checking for style of include used by make... GNU
> >>> checking dependency style of gcc... gcc3
> >>> checking how to run the C preprocessor... gcc -E
> >>> checking for gawk... (cached) gawk
> >>> checking whether ln -s works... yes
> >>> checking whether make sets $(MAKE)... (cached) yes
> >>> checking for a BSD-compatible install... /usr/bin/install -c
> >>> checking for __attribute__... yes
> >>> checking for runpath switch... -Wl,-rpath,
> >>> checking for ranlib... ranlib
> >>> checking for ld used by GCC... /usr/bin/ld
> >>> checking if the linker (/usr/bin/ld) is GNU ld... yes
> >>> checking for BSD-compatible nm... /usr/bin/nm -B
> >>> updating cache ./config.cache
> >>> loading cache ./config.cache within ltconfig
> >>> checking for object suffix... o
> >>> checking for executable suffix... (cached)
> >>> checking for gcc option to produce PIC... -fPIC
> >>> checking if gcc PIC flag -fPIC works... yes
> >>> checking if gcc supports -c -o file.o... yes
> >>> checking if gcc supports -c -o file.lo... yes
> >>> checking if gcc supports -fno-rtti -fno-exceptions ... no
> >>> checking if gcc static flag -static works... -static
> >>> checking if the linker (/usr/bin/ld) is GNU ld... yes
> >>> checking whether the linker (/usr/bin/ld) supports shared 
> >>> libraries... yes
> >>> checking command to parse /usr/bin/nm -B output... ok
> >>> checking how to hardcode library paths into programs... immediate
> >>> checking for /usr/bin/ld option to reload object files... -r
> >>> checking dynamic linker characteristics... Linux ld.so
> >>> checking if libtool supports shared libraries... yes
> >>> checking whether to build shared libraries... yes
> >>> checking whether to build static libraries... yes
> >>> checking for objdir... .libs
> >>> creating libtool
> >>> updating cache ./config.cache
> >>> configure: loading cache ./config.cache
> >>> checking for connect... yes
> >>> checking for res_search... no
> >>> checking for res_search in -lresolv... yes
> >>> checking for dn_expand... yes
> >>> checking for dns_lookup... no
> >>> checking DB path to use... /etc/sasldb2
> >>> checking for egrep... grep -E
> >>> checking for ANSI C header files... yes
> >>> checking for sys/types.h... yes
> >>> checking for sys/stat.h... yes
> >>> checking for stdlib.h... yes
> >>> checking for string.h... yes
> >>> checking for memory.h... yes
> >>> checking for strings.h... yes
> >>> checking for inttypes.h... yes
> >>> checking for stdint.h... yes
> >>> checking for unistd.h... yes
> >>> checking db.h usability... no
> >>> checking db.h presence... no
> >>> checking for db.h... no
> >>> checking ndbm.h usability... no
> >>> checking ndbm.h presence... no
> >>> checking for ndbm.h... no
> >>> checking gdbm.h usability... no
> >>> checking gdbm.h presence... no
> >>> checking for gdbm.h... no
> >>> checking DB library to use... no
> >>> configure: WARNING: Disabling SASL authentication database support
> >>> checking for dlopen in -ldl... yes
> >>> checking /dev/random to use... /dev/random
> >>> checking for nm... /usr/bin/nm -B
> >>> checking for underscore before symbols... no
> >>> checking for syslog... yes
> >>> checking for pam_start in -lpam... no
> >>> checking if I should include saslauthd... /var/state/saslauthd
> >>> checking to include Courier authdaemond support... /dev/null
> >>> checking if I should include pwcheck... no
> >>> checking if I should include the alwaystrue verifier... no
> >>> checking if we should enable sasl_checkapop... enabled
> >>> checking CRAM-MD5... enabled
> >>> checking for OpenSSL... no
> >>> configure: WARNING: No DES support for DIGEST-MD5
> >>> checking DIGEST-MD5... enabled
> >>> configure: WARNING: OpenSSL not found -- OTP will be disabled
> >>> checking OTP... disabled
> >>> configure: WARNING: OpenSSL not found -- SRP will be disabled
> >>> checking SRP... disabled
> >>> checking KERBEROS_V4... disabled
> >>> checking for crypt... no
> >>> checking for crypt in -lcrypt... yes
> >>> checking gssapi.h usability... no
> >>> checking gssapi.h presence... no
> >>> checking for gssapi.h... no
> >>> checking gssapi/gssapi.h usability... no
> >>> checking gssapi/gssapi.h presence... no
> >>> checking for gssapi/gssapi.h... no
> >>> configure: WARNING: Disabling GSSAPI - no include files found
> >>> checking GSSAPI... disabled
> >>> checking PLAIN... enabled
> >>> checking ANONYMOUS... enabled
> >>> checking LOGIN... disabled
> >>> configure: WARNING: OpenSSL not found -- NTLM will be disabled
> >>> checking NTLM... disabled
> >>> checking SQL... disabled
> >>> checking for dmalloc library... no
> >>> checking for sfio library... no
> >>> checking for getsubopt... yes
> >>> checking for snprintf... yes
> >>> checking for vsnprintf... yes
> >>> checking for inet_aton in -lresolv... yes
> >>> checking for getaddrinfo... yes
> >>> checking for gai_strerror... yes
> >>> checking for getnameinfo... yes
> >>> checking for an ANSI C-conforming const... yes
> >>> checking for inline... inline
> >>> checking for mode_t... yes
> >>> checking for pid_t... yes
> >>> checking return type of signal handlers... void
> >>> checking whether time.h and sys/time.h may both be included... yes
> >>> checking for ANSI C header files... (cached) yes
> >>> checking for dirent.h that defines DIR... yes
> >>> checking for library containing opendir... none required
> >>> checking for sys/wait.h that is POSIX.1 compatible... yes
> >>> checking dlfcn.h usability... yes
> >>> checking dlfcn.h presence... yes
> >>> checking for dlfcn.h... yes
> >>> checking fcntl.h usability... yes
> >>> checking fcntl.h presence... yes
> >>> checking for fcntl.h... yes
> >>> checking limits.h usability... yes
> >>> checking limits.h presence... yes
> >>> checking for limits.h... yes
> >>> checking malloc.h usability... yes
> >>> checking malloc.h presence... yes
> >>> checking for malloc.h... yes
> >>> checking paths.h usability... yes
> >>> checking paths.h presence... yes
> >>> checking for paths.h... yes
> >>> checking for strings.h... (cached) yes
> >>> checking sys/file.h usability... yes
> >>> checking sys/file.h presence... yes
> >>> checking for sys/file.h... yes
> >>> checking sys/time.h usability... yes
> >>> checking sys/time.h presence... yes
> >>> checking for sys/time.h... yes
> >>> checking syslog.h usability... yes
> >>> checking syslog.h presence... yes
> >>> checking for syslog.h... yes
> >>> checking for unistd.h... (cached) yes
> >>> checking for inttypes.h... (cached) yes
> >>> checking sys/uio.h usability... yes
> >>> checking sys/uio.h presence... yes
> >>> checking for sys/uio.h... yes
> >>> checking sys/param.h usability... yes
> >>> checking sys/param.h presence... yes
> >>> checking for sys/param.h... yes
> >>> checking sysexits.h usability... yes
> >>> checking sysexits.h presence... yes
> >>> checking for sysexits.h... yes
> >>> checking stdarg.h usability... yes
> >>> checking stdarg.h presence... yes
> >>> checking for stdarg.h... yes
> >>> checking varargs.h usability... no
> >>> checking varargs.h presence... no
> >>> checking for varargs.h... no
> >>> checking whether you have ss_family in struct sockaddr_storage... yes
> >>> checking whether you have sa_len in struct sockaddr... no
> >>> checking for socklen_t... yes
> >>> checking for gethostname... yes
> >>> checking for getdomainname... yes
> >>> checking for getpwnam... yes
> >>> checking for getspnam... yes
> >>> checking for gettimeofday... yes
> >>> checking for inet_aton... yes
> >>> checking for memcpy... yes
> >>> checking for mkdir... yes
> >>> checking for select... yes
> >>> checking for socket... yes
> >>> checking for strchr... yes
> >>> checking for strdup... yes
> >>> checking for strerror... yes
> >>> checking for strspn... yes
> >>> checking for strstr... yes
> >>> checking for strtol... yes
> >>> checking for jrand48... yes
> >>> updating cache ./config.cache
> >>> configure: creating ./config.status
> >>> config.status: creating Makefile
> >>> config.status: creating include/Makefile
> >>> config.status: creating sasldb/Makefile
> >>> config.status: creating plugins/Makefile
> >>> config.status: creating lib/Makefile
> >>> config.status: creating utils/Makefile
> >>> config.status: creating doc/Makefile
> >>> config.status: creating sample/Makefile
> >>> config.status: creating java/Makefile
> >>> config.status: creating java/CyrusSasl/Makefile
> >>> config.status: creating java/Test/Makefile
> >>> config.status: creating java/javax/Makefile
> >>> config.status: creating java/javax/security/Makefile
> >>> config.status: creating java/javax/security/auth/Makefile
> >>> config.status: creating java/javax/security/auth/callback/Makefile
> >>> config.status: creating pwcheck/Makefile
> >>> config.status: creating man/Makefile
> >>> config.status: creating config.h
> >>> config.status: executing depfiles commands
> >>> configure: configuring in saslauthd
> >>> configure: running /bin/sh './configure' --prefix=/usr/local  
> >>> '--enable-gssapi=/usr/kerberos/include/' '--enable-static' 
> >>> '--without-des' '--without-openssl' 'CFLAGS=-O2' 
> >>> --cache-file=.././config.cache --srcdir=.
> >>> configure: loading cache .././config.cache
> >>> checking build system type... (cached) i686-pc-linux-gnu
> >>> checking host system type... (cached) i686-pc-linux-gnu
> >>> checking for a BSD-compatible install... (cached) /usr/bin/install -c
> >>> checking whether build environment is sane... yes
> >>> checking for gawk... (cached) gawk
> >>> checking whether make sets $(MAKE)... (cached) yes
> >>> checking for gcc... (cached) gcc
> >>> checking for C compiler default output... a.out
> >>> checking whether the C compiler works... yes
> >>> checking whether we are cross compiling... no
> >>> checking for suffix of executables...
> >>> checking for suffix of object files... (cached) o
> >>> checking whether we are using the GNU C compiler... (cached) yes
> >>> checking whether gcc accepts -g... (cached) yes
> >>> checking for gcc option to accept ANSI C... (cached) none needed
> >>> checking for style of include used by make... GNU
> >>> checking dependency style of gcc... (cached) gcc3
> >>> checking how to run the C preprocessor... (cached) gcc -E
> >>> checking for gawk... (cached) gawk
> >>> checking whether make sets $(MAKE)... (cached) yes
> >>> checking whether ln -s works... yes
> >>> checking for a BSD-compatible install... /usr/bin/install -c
> >>> checking for __attribute__... (cached) yes
> >>> checking for runpath switch... -Wl,-rpath,
> >>> checking for connect... (cached) yes
> >>> checking for res_search... (cached) no
> >>> checking for res_search in -lresolv... (cached) yes
> >>> checking for dn_expand... (cached) yes
> >>> checking for dns_lookup... (cached) no
> >>> checking for egrep... (cached) grep -E
> >>> checking for ANSI C header files... (cached) yes
> >>> checking for sys/types.h... (cached) yes
> >>> checking for sys/stat.h... (cached) yes
> >>> checking for stdlib.h... (cached) yes
> >>> checking for string.h... (cached) yes
> >>> checking for memory.h... (cached) yes
> >>> checking for strings.h... (cached) yes
> >>> checking for inttypes.h... (cached) yes
> >>> checking for stdint.h... (cached) yes
> >>> checking for unistd.h... (cached) yes
> >>> checking for OpenSSL... no
> >>> checking KERBEROS_V4... disabled
> >>> checking for crypt... (cached) no
> >>> checking for crypt in -lcrypt... (cached) yes
> >>> checking for gssapi.h... (cached) no
> >>> checking for gssapi/gssapi.h... (cached) no
> >>> configure: WARNING: Disabling GSSAPI - no include files found
> >>> checking GSSAPI... disabled
> >>> checking for crypt... (cached) no
> >>> checking for crypt in -lcrypt... (cached) yes
> >>> checking for pam_start in -lpam... (cached) no
> >>> checking for PAM support... no
> >>> checking for inet_aton in -lresolv... (cached) yes
> >>> checking to include LDAP support... no
> >>> checking for ANSI C header files... (cached) yes
> >>> checking for sys/wait.h that is POSIX.1 compatible... (cached) yes
> >>> checking whether time.h and sys/time.h may both be included... 
> >>> (cached) yes
> >>> checking crypt.h usability... yes
> >>> checking crypt.h presence... yes
> >>> checking for crypt.h... yes
> >>> checking for fcntl.h... (cached) yes
> >>> checking krb5.h usability... no
> >>> checking krb5.h presence... no
> >>> checking for krb5.h... no
> >>> checking for strings.h... (cached) yes
> >>> checking for syslog.h... (cached) yes
> >>> checking for unistd.h... (cached) yes
> >>> checking for sys/time.h... (cached) yes
> >>> checking for sys/uio.h... (cached) yes
> >>> checking for an ANSI C-conforming const... (cached) yes
> >>> checking for pid_t... (cached) yes
> >>> checking whether gcc implements __func__... yes
> >>> checking return type of signal handlers... (cached) void
> >>> checking for gethostname... (cached) yes
> >>> checking for mkdir... (cached) yes
> >>> checking for socket... (cached) yes
> >>> checking for strdup... (cached) yes
> >>> checking for getspnam... (cached) yes
> >>> checking for strlcat... no
> >>> checking for strlcpy... no
> >>> checking for getaddrinfo... (cached) yes
> >>> checking for getnameinfo... (cached) yes
> >>> checking whether you have ss_family in struct sockaddr_storage... 
> >>> (cached) yes
> >>> checking whether you have sa_len in struct sockaddr... (cached) no
> >>> checking for socklen_t... (cached) yes
> >>> updating cache .././config.cache
> >>> configure: creating ./config.status
> >>> config.status: creating Makefile
> >>> config.status: creating saslauthd.h
> >>> config.status: executing depfiles commands
> >>> Configuration Complete. Type 'make' to build.
> >>> [root@genie cyrus-sasl-2.1.20]# make
> >>> make  all-recursive
> >>> make[1]: Entering directory 
> >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> >>> Making all in include
> >>> make[2]: Entering directory 
> >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
> >>> if gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -W -O2 -MT makemd5.o 
> >>> -MD -MP -MF ".deps/makemd5.Tpo" \
> >>>  -c -o makemd5.o `test -f 'makemd5.c' || echo './'`makemd5.c;
> \
> >>> then mv ".deps/makemd5.Tpo" ".deps/makemd5.Po"; \
> >>> else rm -f ".deps/makemd5.Tpo"; exit 1; \
> >>> fi
> >>> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o makemd5  
> >>> makemd5.o  -lresolv
> >>> mkdir .libs
> >>> gcc -Wall -W -O2 -o makemd5 makemd5.o -lresolv
> >>> rm -f md5global.h
> >>> ./makemd5 md5global.h
> >>> make[2]: Leaving directory 
> >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/include'
> >>> Making all in sasldb
> >>> make[2]: Entering directory 
> >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb'
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../include     -Wall -W -O2 -MT allockey.lo -MD 
> >>> -MP -MF ".deps/allockey.Tpo" \
> >>>  -c -o allockey.lo `test -f 'allockey.c' || echo
> './'`allockey.c; \
> >>> then mv ".deps/allockey.Tpo" ".deps/allockey.Plo"; \
> >>> else rm -f ".deps/allockey.Tpo"; exit 1; \
> >>> fi
> >>> mkdir .libs
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W 
> >>> -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c  
> >>> -fPIC -DPIC -o .libs/allockey.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W 
> >>> -O2 -MT allockey.lo -MD -MP -MF .deps/allockey.Tpo -c allockey.c -o 
> >>> allockey.o >/dev/null 2>&1
> >>> mv -f .libs/allockey.lo allockey.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../include     -Wall -W -O2 -MT db_none.lo -MD 
> >>> -MP -MF ".deps/db_none.Tpo" \
> >>>  -c -o db_none.lo `test -f 'db_none.c' || echo
> './'`db_none.c; \
> >>> then mv ".deps/db_none.Tpo" ".deps/db_none.Plo"; \
> >>> else rm -f ".deps/db_none.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/db_none.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W 
> >>> -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c  -fPIC 
> >>> -DPIC -o .libs/db_none.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -Wall -W 
> >>> -O2 -MT db_none.lo -MD -MP -MF .deps/db_none.Tpo -c db_none.c -o 
> >>> db_none.o  >/dev/null 2>&1
> >>> mv -f .libs/db_none.lo db_none.lo
> >>> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o libsasldb.la   
> >>> allockey.lo db_none.lo  -lresolv
> >>> rm -fr .libs/libsasldb.la .libs/libsasldb.* .libs/libsasldb.*
> >>> ar cru .libs/libsasldb.al allockey.lo db_none.lo
> >>> ranlib .libs/libsasldb.al
> >>> creating libsasldb.la
> >>> (cd .libs && rm -f libsasldb.la && ln -s ../libsasldb.la
> libsasldb.la)
> >>> ar cru .libs/libsasldb.a db_none.o
> >>> make[2]: Leaving directory 
> >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/sasldb'
> >>> Making all in plugins
> >>> make[2]: Entering directory 
> >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins'
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >>> -MT cram.lo -MD -MP -MF ".deps/cram.Tpo" \
> >>>  -c -o cram.lo `test -f 'cram.c' || echo './'`cram.c; \
> >>> then mv ".deps/cram.Tpo" ".deps/cram.Plo"; \
> >>> else rm -f ".deps/cram.Tpo"; exit 1; \
> >>> fi
> >>> mkdir .libs
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c 
> >>> cram.c  -fPIC -DPIC -o .libs/cram.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT cram.lo -MD -MP -MF .deps/cram.Tpo -c 
> >>> cram.c -o cram.o >/dev/null 2>&1
> >>> mv -f .libs/cram.lo cram.lo
> >>> /bin/sh ./makeinit.sh
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >>> -MT crammd5_init.lo -MD -MP -MF ".deps/crammd5_init.Tpo" \
> >>>  -c -o crammd5_init.lo `test -f 'crammd5_init.c' || echo 
> >>> './'`crammd5_init.c; \
> >>> then mv ".deps/crammd5_init.Tpo"
> ".deps/crammd5_init.Plo"; \
> >>> else rm -f ".deps/crammd5_init.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/crammd5_init.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF 
> >>> .deps/crammd5_init.Tpo -c crammd5_init.c  -fPIC -DPIC -o 
> >>> .libs/crammd5_init.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT crammd5_init.lo -MD -MP -MF 
> >>> .deps/crammd5_init.Tpo -c crammd5_init.c -o crammd5_init.o 
> >>> >/dev/null 2>&1
> >>> mv -f .libs/crammd5_init.lo crammd5_init.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >>> -MT plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \
> >>>  -c -o plugin_common.lo `test -f 'plugin_common.c' || echo 
> >>> './'`plugin_common.c; \
> >>> then mv ".deps/plugin_common.Tpo"
> ".deps/plugin_common.Plo"; \
> >>> else rm -f ".deps/plugin_common.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/plugin_common.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
> >>> .deps/plugin_common.Tpo -c plugin_common.c  -fPIC -DPIC -o 
> >>> .libs/plugin_common.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
> >>> .deps/plugin_common.Tpo -c plugin_common.c -o plugin_common.o 
> >>> >/dev/null 2>&1
> >>> mv -f .libs/plugin_common.lo plugin_common.lo
> >>> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module 
> >>> -export-dynamic -rpath /usr/lib/sasl2  -o libcrammd5.la  
> >>> -version-info 2:20:0 cram.lo crammd5_init.lo plugin_common.lo  -lresolv
> >>> rm -fr .libs/libcrammd5.la .libs/libcrammd5.* .libs/libcrammd5.*
> >>> gcc -shared  cram.lo crammd5_init.lo plugin_common.lo  -lresolv -lc  
> >>> -Wl,-soname -Wl,libcrammd5.so.2 -o .libs/libcrammd5.so.2.0.20
> >>> (cd .libs && rm -f libcrammd5.so.2 && ln -s
> libcrammd5.so.2.0.20 
> >>> libcrammd5.so.2)
> >>> (cd .libs && rm -f libcrammd5.so && ln -s
> libcrammd5.so.2.0.20 
> >>> libcrammd5.so)
> >>> ar cru .libs/libcrammd5.a  cram.o crammd5_init.o plugin_common.o
> >>> ranlib .libs/libcrammd5.a
> >>> creating libcrammd5.la
> >>> (cd .libs && rm -f libcrammd5.la && ln -s ../libcrammd5.la 
> >>> libcrammd5.la)
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >>> -MT digestmd5.lo -MD -MP -MF ".deps/digestmd5.Tpo" \
> >>>  -c -o digestmd5.lo `test -f 'digestmd5.c' || echo
> './'`digestmd5.c; \
> >>> then mv ".deps/digestmd5.Tpo" ".deps/digestmd5.Plo"; \
> >>> else rm -f ".deps/digestmd5.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/digestmd5.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF 
> >>> .deps/digestmd5.Tpo -c digestmd5.c  -fPIC -DPIC -o .libs/digestmd5.lo
> >>> digestmd5.c: In function `digestmd5_server_mech_step2':
> >>> digestmd5.c:2093: warning: dereferencing type-punned pointer will 
> >>> break strict-aliasing rules
> >>> digestmd5.c:2110: warning: dereferencing type-punned pointer will 
> >>> break strict-aliasing rules
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT digestmd5.lo -MD -MP -MF 
> >>> .deps/digestmd5.Tpo -c digestmd5.c -o digestmd5.o >/dev/null 2>&1
> >>> mv -f .libs/digestmd5.lo digestmd5.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >>> -MT digestmd5_init.lo -MD -MP -MF ".deps/digestmd5_init.Tpo" \
> >>>  -c -o digestmd5_init.lo `test -f 'digestmd5_init.c' || echo 
> >>> './'`digestmd5_init.c; \
> >>> then mv ".deps/digestmd5_init.Tpo"
> ".deps/digestmd5_init.Plo"; \
> >>> else rm -f ".deps/digestmd5_init.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/digestmd5_init.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF 
> >>> .deps/digestmd5_init.Tpo -c digestmd5_init.c  -fPIC -DPIC -o 
> >>> .libs/digestmd5_init.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT digestmd5_init.lo -MD -MP -MF 
> >>> .deps/digestmd5_init.Tpo -c digestmd5_init.c -o digestmd5_init.o 
> >>>  >/dev/null 2>&1
> >>> mv -f .libs/digestmd5_init.lo digestmd5_init.lo
> >>> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module 
> >>> -export-dynamic -rpath /usr/lib/sasl2  -o libdigestmd5.la  
> >>> -version-info 2:20:0 digestmd5.lo digestmd5_init.lo 
> >>> plugin_common.lo  -lresolv   -lresolv
> >>> rm -fr .libs/libdigestmd5.la .libs/libdigestmd5.* .libs/libdigestmd5.*
> >>> gcc -shared  digestmd5.lo digestmd5_init.lo plugin_common.lo  
> >>> -lresolv -lresolv -lc  -Wl,-soname -Wl,libdigestmd5.so.2 -o 
> >>> .libs/libdigestmd5.so.2.0.20
> >>> (cd .libs && rm -f libdigestmd5.so.2 && ln -s
> libdigestmd5.so.2.0.20 
> >>> libdigestmd5.so.2)
> >>> (cd .libs && rm -f libdigestmd5.so && ln -s
> libdigestmd5.so.2.0.20 
> >>> libdigestmd5.so)
> >>> ar cru .libs/libdigestmd5.a  digestmd5.o digestmd5_init.o 
> >>> plugin_common.o
> >>> ranlib .libs/libdigestmd5.a
> >>> creating libdigestmd5.la
> >>> (cd .libs && rm -f libdigestmd5.la && ln -s
> ../libdigestmd5.la 
> >>> libdigestmd5.la)
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >>> -MT plain.lo -MD -MP -MF ".deps/plain.Tpo" \
> >>>  -c -o plain.lo `test -f 'plain.c' || echo './'`plain.c; \
> >>> then mv ".deps/plain.Tpo" ".deps/plain.Plo"; \
> >>> else rm -f ".deps/plain.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/plain.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo 
> >>> -c plain.c  -fPIC -DPIC -o .libs/plain.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT plain.lo -MD -MP -MF .deps/plain.Tpo 
> >>> -c plain.c -o plain.o >/dev/null 2>&1
> >>> mv -f .libs/plain.lo plain.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >>> -MT plain_init.lo -MD -MP -MF ".deps/plain_init.Tpo" \
> >>>  -c -o plain_init.lo `test -f 'plain_init.c' || echo 
> >>> './'`plain_init.c; \
> >>> then mv ".deps/plain_init.Tpo" ".deps/plain_init.Plo"; \
> >>> else rm -f ".deps/plain_init.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/plain_init.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF 
> >>> .deps/plain_init.Tpo -c plain_init.c  -fPIC -DPIC -o 
> >>> .libs/plain_init.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT plain_init.lo -MD -MP -MF 
> >>> .deps/plain_init.Tpo -c plain_init.c -o plain_init.o >/dev/null
> 2>&1
> >>> mv -f .libs/plain_init.lo plain_init.lo
> >>> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module 
> >>> -export-dynamic -rpath /usr/lib/sasl2  -o libplain.la  -version-info 
> >>> 2:20:0 plain.lo plain_init.lo plugin_common.lo -lcrypt  -lresolv
> >>> rm -fr .libs/libplain.la .libs/libplain.* .libs/libplain.*
> >>> gcc -shared  plain.lo plain_init.lo plugin_common.lo  -lcrypt 
> >>> -lresolv -lc  -Wl,-soname -Wl,libplain.so.2 -o .libs/libplain.so.2.0.20
> >>> (cd .libs && rm -f libplain.so.2 && ln -s libplain.so.2.0.20
>
> >>> libplain.so.2)
> >>> (cd .libs && rm -f libplain.so && ln -s libplain.so.2.0.20
> libplain.so)
> >>> ar cru .libs/libplain.a  plain.o plain_init.o plugin_common.o
> >>> ranlib .libs/libplain.a
> >>> creating libplain.la
> >>> (cd .libs && rm -f libplain.la && ln -s ../libplain.la
> libplain.la)
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >>> -MT anonymous.lo -MD -MP -MF ".deps/anonymous.Tpo" \
> >>>  -c -o anonymous.lo `test -f 'anonymous.c' || echo
> './'`anonymous.c; \
> >>> then mv ".deps/anonymous.Tpo" ".deps/anonymous.Plo"; \
> >>> else rm -f ".deps/anonymous.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/anonymous.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF 
> >>> .deps/anonymous.Tpo -c anonymous.c  -fPIC -DPIC -o .libs/anonymous.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT anonymous.lo -MD -MP -MF 
> >>> .deps/anonymous.Tpo -c anonymous.c -o anonymous.o >/dev/null 2>&1
> >>> mv -f .libs/anonymous.lo anonymous.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../lib -I../sasldb -I../include    -Wall -W -O2 
> >>> -MT anonymous_init.lo -MD -MP -MF ".deps/anonymous_init.Tpo" \
> >>>  -c -o anonymous_init.lo `test -f 'anonymous_init.c' || echo 
> >>> './'`anonymous_init.c; \
> >>> then mv ".deps/anonymous_init.Tpo"
> ".deps/anonymous_init.Plo"; \
> >>> else rm -f ".deps/anonymous_init.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/anonymous_init.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF 
> >>> .deps/anonymous_init.Tpo -c anonymous_init.c  -fPIC -DPIC -o 
> >>> .libs/anonymous_init.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../lib -I../sasldb 
> >>> -I../include -Wall -W -O2 -MT anonymous_init.lo -MD -MP -MF 
> >>> .deps/anonymous_init.Tpo -c anonymous_init.c -o anonymous_init.o 
> >>>  >/dev/null 2>&1
> >>> mv -f .libs/anonymous_init.lo anonymous_init.lo
> >>> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2 -module 
> >>> -export-dynamic -rpath /usr/lib/sasl2  -o libanonymous.la  
> >>> -version-info 2:20:0 anonymous.lo anonymous_init.lo 
> >>> plugin_common.lo  -lresolv
> >>> rm -fr .libs/libanonymous.la .libs/libanonymous.* .libs/libanonymous.*
> >>> gcc -shared  anonymous.lo anonymous_init.lo plugin_common.lo  
> >>> -lresolv -lc  -Wl,-soname -Wl,libanonymous.so.2 -o 
> >>> .libs/libanonymous.so.2.0.20
> >>> (cd .libs && rm -f libanonymous.so.2 && ln -s
> libanonymous.so.2.0.20 
> >>> libanonymous.so.2)
> >>> (cd .libs && rm -f libanonymous.so && ln -s
> libanonymous.so.2.0.20 
> >>> libanonymous.so)
> >>> ar cru .libs/libanonymous.a  anonymous.o anonymous_init.o 
> >>> plugin_common.o
> >>> ranlib .libs/libanonymous.a
> >>> creating libanonymous.la
> >>> (cd .libs && rm -f libanonymous.la && ln -s
> ../libanonymous.la 
> >>> libanonymous.la)
> >>> make[2]: Leaving directory 
> >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/plugins'
> >>> Making all in lib
> >>> make[2]: Entering directory 
> >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib'
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> auxprop.lo -MD -MP -MF ".deps/auxprop.Tpo" \
> >>>  -c -o auxprop.lo `test -f 'auxprop.c' || echo
> './'`auxprop.c; \
> >>> then mv ".deps/auxprop.Tpo" ".deps/auxprop.Plo"; \
> >>> else rm -f ".deps/auxprop.Tpo"; exit 1; \
> >>> fi
> >>> mkdir .libs
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF 
> >>> .deps/auxprop.Tpo -c auxprop.c  -fPIC -DPIC -o .libs/auxprop.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT auxprop.lo -MD -MP -MF 
> >>> .deps/auxprop.Tpo -c auxprop.c -o auxprop.o >/dev/null 2>&1
> >>> mv -f .libs/auxprop.lo auxprop.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> canonusr.lo -MD -MP -MF ".deps/canonusr.Tpo" \
> >>>  -c -o canonusr.lo `test -f 'canonusr.c' || echo
> './'`canonusr.c; \
> >>> then mv ".deps/canonusr.Tpo" ".deps/canonusr.Plo"; \
> >>> else rm -f ".deps/canonusr.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/canonusr.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF 
> >>> .deps/canonusr.Tpo -c canonusr.c  -fPIC -DPIC -o .libs/canonusr.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT canonusr.lo -MD -MP -MF 
> >>> .deps/canonusr.Tpo -c canonusr.c -o canonusr.o >/dev/null 2>&1
> >>> mv -f .libs/canonusr.lo canonusr.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> checkpw.lo -MD -MP -MF ".deps/checkpw.Tpo" \
> >>>  -c -o checkpw.lo `test -f 'checkpw.c' || echo
> './'`checkpw.c; \
> >>> then mv ".deps/checkpw.Tpo" ".deps/checkpw.Plo"; \
> >>> else rm -f ".deps/checkpw.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/checkpw.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF 
> >>> .deps/checkpw.Tpo -c checkpw.c  -fPIC -DPIC -o .libs/checkpw.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT checkpw.lo -MD -MP -MF 
> >>> .deps/checkpw.Tpo -c checkpw.c -o checkpw.o >/dev/null 2>&1
> >>> mv -f .libs/checkpw.lo checkpw.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> client.lo -MD -MP -MF ".deps/client.Tpo" \
> >>>  -c -o client.lo `test -f 'client.c' || echo './'`client.c;
> \
> >>> then mv ".deps/client.Tpo" ".deps/client.Plo"; \
> >>> else rm -f ".deps/client.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/client.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo 
> >>> -c client.c  -fPIC -DPIC -o .libs/client.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT client.lo -MD -MP -MF .deps/client.Tpo 
> >>> -c client.c -o client.o >/dev/null 2>&1
> >>> mv -f .libs/client.lo client.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> common.lo -MD -MP -MF ".deps/common.Tpo" \
> >>>  -c -o common.lo `test -f 'common.c' || echo './'`common.c;
> \
> >>> then mv ".deps/common.Tpo" ".deps/common.Plo"; \
> >>> else rm -f ".deps/common.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/common.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo 
> >>> -c common.c  -fPIC -DPIC -o .libs/common.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT common.lo -MD -MP -MF .deps/common.Tpo 
> >>> -c common.c -o common.o >/dev/null 2>&1
> >>> mv -f .libs/common.lo common.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> config.lo -MD -MP -MF ".deps/config.Tpo" \
> >>>  -c -o config.lo `test -f 'config.c' || echo './'`config.c;
> \
> >>> then mv ".deps/config.Tpo" ".deps/config.Plo"; \
> >>> else rm -f ".deps/config.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/config.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo 
> >>> -c config.c  -fPIC -DPIC -o .libs/config.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT config.lo -MD -MP -MF .deps/config.Tpo 
> >>> -c config.c -o config.o >/dev/null 2>&1
> >>> mv -f .libs/config.lo config.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> external.lo -MD -MP -MF ".deps/external.Tpo" \
> >>>  -c -o external.lo `test -f 'external.c' || echo
> './'`external.c; \
> >>> then mv ".deps/external.Tpo" ".deps/external.Plo"; \
> >>> else rm -f ".deps/external.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/external.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF 
> >>> .deps/external.Tpo -c external.c  -fPIC -DPIC -o .libs/external.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT external.lo -MD -MP -MF 
> >>> .deps/external.Tpo -c external.c -o external.o >/dev/null 2>&1
> >>> mv -f .libs/external.lo external.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> md5.lo -MD -MP -MF ".deps/md5.Tpo" \
> >>>  -c -o md5.lo `test -f 'md5.c' || echo './'`md5.c; \
> >>> then mv ".deps/md5.Tpo" ".deps/md5.Plo"; \
> >>> else rm -f ".deps/md5.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/md5.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c 
> >>> md5.c  -fPIC -DPIC -o .libs/md5.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c 
> >>> md5.c -o md5.o  >/dev/null 2>&1
> >>> mv -f .libs/md5.lo md5.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> saslutil.lo -MD -MP -MF ".deps/saslutil.Tpo" \
> >>>  -c -o saslutil.lo `test -f 'saslutil.c' || echo
> './'`saslutil.c; \
> >>> then mv ".deps/saslutil.Tpo" ".deps/saslutil.Plo"; \
> >>> else rm -f ".deps/saslutil.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/saslutil.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF 
> >>> .deps/saslutil.Tpo -c saslutil.c  -fPIC -DPIC -o .libs/saslutil.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT saslutil.lo -MD -MP -MF 
> >>> .deps/saslutil.Tpo -c saslutil.c -o saslutil.o >/dev/null 2>&1
> >>> mv -f .libs/saslutil.lo saslutil.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> server.lo -MD -MP -MF ".deps/server.Tpo" \
> >>>  -c -o server.lo `test -f 'server.c' || echo './'`server.c;
> \
> >>> then mv ".deps/server.Tpo" ".deps/server.Plo"; \
> >>> else rm -f ".deps/server.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/server.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo 
> >>> -c server.c  -fPIC -DPIC -o .libs/server.lo
> >>> server.c: In function `sasl_setpass':
> >>> server.c:151: warning: dereferencing type-punned pointer will break 
> >>> strict-aliasing rules
> >>> server.c: In function `sasl_server_start':
> >>> server.c:1245: warning: dereferencing type-punned pointer will break 
> >>> strict-aliasing rules
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT server.lo -MD -MP -MF .deps/server.Tpo 
> >>> -c server.c -o server.o >/dev/null 2>&1
> >>> mv -f .libs/server.lo server.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> seterror.lo -MD -MP -MF ".deps/seterror.Tpo" \
> >>>  -c -o seterror.lo `test -f 'seterror.c' || echo
> './'`seterror.c; \
> >>> then mv ".deps/seterror.Tpo" ".deps/seterror.Plo"; \
> >>> else rm -f ".deps/seterror.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/seterror.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF 
> >>> .deps/seterror.Tpo -c seterror.c  -fPIC -DPIC -o .libs/seterror.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT seterror.lo -MD -MP -MF 
> >>> .deps/seterror.Tpo -c seterror.c -o seterror.o >/dev/null 2>&1
> >>> mv -f .libs/seterror.lo seterror.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> dlopen.lo -MD -MP -MF ".deps/dlopen.Tpo" \
> >>>  -c -o dlopen.lo `test -f 'dlopen.c' || echo './'`dlopen.c;
> \
> >>> then mv ".deps/dlopen.Tpo" ".deps/dlopen.Plo"; \
> >>> else rm -f ".deps/dlopen.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/dlopen.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo 
> >>> -c dlopen.c  -fPIC -DPIC -o .libs/dlopen.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT dlopen.lo -MD -MP -MF .deps/dlopen.Tpo 
> >>> -c dlopen.c -o dlopen.o >/dev/null 2>&1
> >>> mv -f .libs/dlopen.lo dlopen.lo
> >>> if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. 
> >>> -I.. -I../include -I../plugins -I../include    -Wall -W -O2 -MT 
> >>> plugin_common.lo -MD -MP -MF ".deps/plugin_common.Tpo" \
> >>>  -c -o plugin_common.lo `test -f '../plugins/plugin_common.c' || 
> >>> echo './'`../plugins/plugin_common.c; \
> >>> then mv ".deps/plugin_common.Tpo"
> ".deps/plugin_common.Plo"; \
> >>> else rm -f ".deps/plugin_common.Tpo"; exit 1; \
> >>> fi
> >>> rm -f .libs/plugin_common.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
> >>> .deps/plugin_common.Tpo -c ../plugins/plugin_common.c  -fPIC -DPIC 
> >>> -o .libs/plugin_common.lo
> >>> gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include -Wall -W -O2 -MT plugin_common.lo -MD -MP -MF 
> >>> .deps/plugin_common.Tpo -c ../plugins/plugin_common.c -o 
> >>> plugin_common.o >/dev/null 2>&1
> >>> mv -f .libs/plugin_common.lo plugin_common.lo
> >>> /bin/sh ../libtool --mode=link gcc  -Wall -W -O2   -o libsasl2.la 
> >>> -rpath /usr/local/lib -version-info 2:20:0 auxprop.lo canonusr.lo 
> >>> checkpw.lo client.lo common.lo config.lo external.lo md5.lo 
> >>> saslutil.lo server.lo seterror.lo dlopen.lo plugin_common.lo   -ldl 
> >>> -lresolv   -lresolv
> >>> rm -fr .libs/libsasl2.la .libs/libsasl2.* .libs/libsasl2.*
> >>> gcc -shared  auxprop.lo canonusr.lo checkpw.lo client.lo common.lo 
> >>> config.lo external.lo md5.lo saslutil.lo server.lo seterror.lo 
> >>> dlopen.lo plugin_common.lo  -ldl -lresolv -lresolv -lc  -Wl,-soname 
> >>> -Wl,libsasl2.so.2 -o .libs/libsasl2.so.2.0.20
> >>> (cd .libs && rm -f libsasl2.so.2 && ln -s libsasl2.so.2.0.20
>
> >>> libsasl2.so.2)
> >>> (cd .libs && rm -f libsasl2.so && ln -s libsasl2.so.2.0.20
> libsasl2.so)
> >>> ar cru .libs/libsasl2.a  auxprop.o canonusr.o checkpw.o client.o 
> >>> common.o config.o external.o md5.o saslutil.o server.o seterror.o 
> >>> dlopen.o plugin_common.o
> >>> ranlib .libs/libsasl2.a
> >>> creating libsasl2.la
> >>> (cd .libs && rm -f libsasl2.la && ln -s ../libsasl2.la
> libsasl2.la)
> >>> if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../plugins 
> >>> -I../include    -Wall -W -O2 -MT ../plugins/sasldb.o -MD -MP -MF 
> >>> ".deps/../plugins/sasldb.Tpo" \
> >>>  -c -o ../plugins/sasldb.o `test -f '../plugins/sasldb.c' || echo 
> >>> './'`../plugins/sasldb.c; \
> >>> then mv ".deps/../plugins/sasldb.Tpo"
> ".deps/../plugins/sasldb.Po"; \
> >>> else rm -f ".deps/../plugins/sasldb.Tpo"; exit 1; \
> >>> fi
> >>> ../plugins/sasldb.c:129: fatal error: opening dependency file 
> >>> .deps/../plugins/sasldb.Tpo: No such file or directory
> >>> compilation terminated.
> >>> make[2]: *** [../plugins/sasldb.o] Error 1
> >>> make[2]: Leaving directory 
> >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20/lib'
> >>> make[1]: *** [all-recursive] Error 1
> >>> make[1]: Leaving directory 
> >>> `/root/Desktop/dsbuild-static/ds/cyrus-sasl-2.1.20'
> >>> make: *** [all] Error 2
> >>> [root@genie cyrus-sasl-2.1.20]#
> >>>
> >>> -- 
> >>> Fedora-directory-users mailing list
> >>> Fedora-directory-users(a)redhat.com
> >>> https://www.redhat.com/mailman/listinfo/fedora-directory-users
> >>
> >>
> >>
> >>
> >> ------------------------------------------------------------------------
> >>
> >> -- 
> >> Fedora-directory-users mailing list
> >> Fedora-directory-users(a)redhat.com
> >> https://www.redhat.com/mailman/listinfo/fedora-directory-users
> >>  
> >>
> >
> > ------------------------------------------------------------------------
> >
> > -- 
> > Fedora-directory-users mailing list
> > Fedora-directory-users(a)redhat.com
> > https://www.redhat.com/mailman/listinfo/fedora-directory-users
> >  
> >
>  
>  -- 
>  Fedora-directory-users mailing list
>  Fedora-directory-users(a)redhat.com
>  https://www.redhat.com/mailman/listinfo/fedora-directory-users