installation issues

[Doug Tucker]

I am baffled.  So reading the install documentation at 
http://directory.fedoraproject.org/wiki/Install_Guide

It links to the install guide at redhat.com which indicates to type yum 
install redhat-ds.  Doing so results in nothing on my centos 6.3 
machine.  The documentation at centos points to the exact same redhat 
document.  I did find another document on centos site for 5.x located 
here: http://wiki.centos.org/HowTos/DirectoryServerSetup .  It says to 
run yum list 389\* .  I did so and there were 3 files available for 
x86_64.  I installed them.  Then when I try to run setup-ds-admin.pl, 
it's not found.  Doing: yum whatprovides */setup-ds-admin.pl it results 
in nothing found.  Help!  Is there another guide somewhere that will 
tell me exactly what packages to install?
<http://directory.fedoraproject.org/wiki/Install_Guide>

-- 
Sincerely,

Doug Tucker

[Rich Megginson]

On 12/19/2012 09:53 AM, Doug Tucker wrote:
>  I am baffled.  So reading the install documentation at 
>  http://directory.fedoraproject.org/wiki/Install_Guide
>
>  It links to the install guide at redhat.com which indicates to type 
>  yum install redhat-ds.  Doing so results in nothing on my centos 6.3 
>  machine.  The documentation at centos points to the exact same redhat 
>  document.  I did find another document on centos site for 5.x located 
>  here: http://wiki.centos.org/HowTos/DirectoryServerSetup .  It says to 
>  run yum list 389\* .  I did so and there were 3 files available for 
>  x86_64. 
What 3 files?

>  I installed them.  Then when I try to run setup-ds-admin.pl, it's
> not 
>  found. 
It is provided by the 389-admin package.

>  Doing: yum whatprovides */setup-ds-admin.pl it results in nothing 
>  found.  Help!  Is there another guide somewhere that will tell me 
>  exactly what packages to install?
>  <http://directory.fedoraproject.org/wiki/Install_Guide>
>  
CentOS used to provide centos-ds* packages which were rebranded versions 
of the redhat-ds* packages provided by RHEL.  I suppose you could try that.

Otherwise, you'll have to use the 389* packages from EPEL6 
http://port389.org/wiki/Download

[Doug Tucker]

>  On 12/19/2012 09:53 AM, Doug Tucker wrote:
> > I am baffled.  So reading the install documentation at 
> > http://directory.fedoraproject.org/wiki/Install_Guide
> >
> > It links to the install guide at redhat.com which indicates to type 
> > yum install redhat-ds.  Doing so results in nothing on my centos 6.3 
> > machine.  The documentation at centos points to the exact same redhat 
> > document.  I did find another document on centos site for 5.x located 
> > here: http://wiki.centos.org/HowTos/DirectoryServerSetup .  It says 
> > to run yum list 389\* .  I did so and there were 3 files available 
> > for x86_64.
>
>  What 3 files? 
[root@lyleauth1 ~]# rpm -qa | grep 389
389-ds-base-devel-1.2.10.2-20.el6_3.x86_64
389-ds-base-libs-1.2.10.2-20.el6_3.x86_64
389-ds-base-1.2.10.2-20.el6_3.x86_64


> > I installed them.  Then when I try to run setup-ds-admin.pl, it's not 
> > found.
>
>  It is provided by the 389-admin package. 
[root@lyleauth1 ~]# yum install 389-admin
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile
  * base: mirror.fdcservers.net
  * extras: centosmirror.quintex.com
  * updates: dist1.800hosting.com
Setting up Install Process
No package 389-admin available.
Error: Nothing to do

[Rich Megginson]

On 12/19/2012 10:22 AM, Doug Tucker wrote:
> > On 12/19/2012 09:53 AM, Doug Tucker wrote:
> >> I am baffled.  So reading the install documentation at 
> >> http://directory.fedoraproject.org/wiki/Install_Guide
> >>
> >> It links to the install guide at redhat.com which indicates to type 
> >> yum install redhat-ds.  Doing so results in nothing on my centos 6.3 
> >> machine.  The documentation at centos points to the exact same 
> >> redhat document.  I did find another document on centos site for 5.x 
> >> located here: http://wiki.centos.org/HowTos/DirectoryServerSetup .  
> >> It says to run yum list 389\* .  I did so and there were 3 files 
> >> available for x86_64.
> >
> > What 3 files?
>  [root@lyleauth1 ~]# rpm -qa | grep 389
>  389-ds-base-devel-1.2.10.2-20.el6_3.x86_64
>  389-ds-base-libs-1.2.10.2-20.el6_3.x86_64
>  389-ds-base-1.2.10.2-20.el6_3.x86_64
>
>
> >
> >> I installed them.  Then when I try to run setup-ds-admin.pl, it's 
> >> not found.
> >
> > It is provided by the 389-admin package.
>  [root@lyleauth1 ~]# yum install 389-admin
>  Loaded plugins: fastestmirror, security
>  Loading mirror speeds from cached hostfile
>   * base: mirror.fdcservers.net
>   * extras: centosmirror.quintex.com
>   * updates: dist1.800hosting.com
>  Setting up Install Process
>  No package 389-admin available.
>  Error: Nothing to do 
Ok.  Looks like CentOS doesn't provide them.  You'll have to get them 
from EPEL6.  http://port389.org/wiki/Download

>  -- 
>  389 users mailing list
>  389-users(a)lists.fedoraproject.org
>  https://admin.fedoraproject.org/mailman/listinfo/389-users

[Doug Tucker]

>  Ok. Looks like CentOS doesn't provide them.  You'll have to
> get them 
>  from EPEL6.  http://port389.org/wiki/Download 
Thanks!  I must say the installation instructions are very confusing.  
Is there a reason the install links to the redhat doc vs. this?

[Rich Megginson]

On 12/19/2012 10:39 AM, Doug Tucker wrote:
> > Ok. Looks like CentOS doesn't provide them.  You'll have to get them 
> > from EPEL6.  http://port389.org/wiki/Download
>
>  Thanks!  I must say the installation instructions are very confusing.  
>  Is there a reason the install links to the redhat doc vs. this?
>  
ok - try this - http://port389.org/wiki/Install_Guide

[Doug Tucker]

On 12/19/2012 11:47 AM, Rich Megginson wrote:
>  On 12/19/2012 10:39 AM, Doug Tucker wrote:
> >
> >> Ok. Looks like CentOS doesn't provide them.  You'll have to get them 
> >> from EPEL6. http://port389.org/wiki/Download
> >
> > Thanks!  I must say the installation instructions are very 
> > confusing.  Is there a reason the install links to the redhat doc vs. 
> > this?
> >
>  ok - try this - http://port389.org/wiki/Install_Guide 
That's where I started. 
The first paragraph links to the install guide 
at redhat.  So that's where I went and ended up confused.

[Rich Megginson]

On 12/19/2012 12:16 PM, Doug Tucker wrote:
>  On 12/19/2012 11:47 AM, Rich Megginson wrote:
> > On 12/19/2012 10:39 AM, Doug Tucker wrote:
> >>
> >>> Ok. Looks like CentOS doesn't provide them.  You'll have to get 
> >>> them from EPEL6. http://port389.org/wiki/Download
> >>
> >> Thanks!  I must say the installation instructions are very 
> >> confusing.  Is there a reason the install links to the redhat doc 
> >> vs. this?
> >>
> > ok - try this - http://port389.org/wiki/Install_Guide
>  That's where I started.  The first paragraph links to the install 
>  guide at redhat.  So that's where I went and ended up confused. 
Right.  I just
changed it.  You may have to reload the page after 
clearing your browser cache.

[Chandan Kumar]

Try this

http://blogatharva.blogspot.ca/2012/11/389-directory-server-installation-...

This is exact steps fro Centos 6.3 with SSSD client authentication. It
should work as it is. If you face issues then let me know.


--
http://about.me/chandank


On Wed, Dec 19, 2012 at 11:16 AM, Doug Tucker <tuckerd(a)lyle.smu.edu&gt; wrote:

>  On 12/19/2012 11:47 AM, Rich Megginson wrote:
>
> > On 12/19/2012 10:39 AM, Doug Tucker wrote:
> >
> >>
> >>  Ok. Looks like CentOS doesn't provide them.  You'll have to get them
> >>> from EPEL6.
> http://port389.org/wiki/**Download<http://port389.org/wiki/Download>
> >>>
> >>
> >> Thanks!  I must say the installation instructions are very confusing.
> >>  Is there a reason the install links to the redhat doc vs. this?
> >>
> >>  ok - try this -
> http://port389.org/wiki/**Install_Guide<http://port389.org/wiki/Instal...
> >
>  That's where I started.  The first paragraph links to the install guide at
>  redhat.  So that's where I went and ended up confused.
>
>  --
>  389 users mailing list
>  389-users(a)lists.fedoraproject.**org <389-users(a)lists.fedoraproject.org&gt;
>
> https://admin.fedoraproject.**org/mailman/listinfo/389-users<https://a...
>

[Rich Megginson]

On 12/19/2012 12:19 PM, Chandan Kumar wrote:
>  Try this
>
>  http://blogatharva.blogspot.ca/2012/11/389-directory-server-installation-...
>
>  This is exact steps fro Centos 6.3 with SSSD client authentication. It 
>  should work as it is. If you face issues then let me know. 
He already tried your very first step and failed.  Can you actually 
confirm that

yum install 389-ds -y

works on CentOS 6?  Without having to set up EPEL6?

>  --
>  http://about.me/chandank
>
>
>  On Wed, Dec 19, 2012 at 11:16 AM, Doug Tucker <tuckerd(a)lyle.smu.edu 
>  <mailto:[e-mail]>> wrote:
>
>      On 12/19/2012 11:47 AM, Rich Megginson wrote:
>
>          On 12/19/2012 10:39 AM, Doug Tucker wrote:
>
>
>                  Ok. Looks like CentOS doesn't provide them.  You'll
>                  have to get them from EPEL6.
>                  http://port389.org/wiki/Download
>
>
>              Thanks!  I must say the installation instructions are very
>              confusing.  Is there a reason the install links to the
>              redhat doc vs. this?
>
>          ok - try this - http://port389.org/wiki/Install_Guide
>
>      That's where I started.  The first paragraph links to the install
>      guide at redhat.  So that's where I went and ended up confused.
>
>      --
>      389 users mailing list
>      389-users(a)lists.fedoraproject.org
>      <mailto:[e-mail]>
>      https://admin.fedoraproject.org/mailman/listinfo/389-users
>
>

[Chandan Kumar]

I think the instruction on the Fedora project link are some what old. I
faced same problem when I follows it.

Redhat document is the best and you should follow that.
On Dec 19, 2012 9:39 AM, "Doug Tucker" <tuckerd(a)lyle.smu.edu&gt; wrote:

>   Ok. Looks like CentOS doesn't provide them.  You'll have to get them from
> > EPEL6.  http://port389.org/wiki/**Download<http://port389.org/wiki/Download>
> >
>
>  Thanks!  I must say the installation instructions are very confusing.  Is
>  there a reason the install links to the redhat doc vs. this?
>
>  --
>  389 users mailing list
>  389-users(a)lists.fedoraproject.**org <389-users(a)lists.fedoraproject.org&gt;
>
> https://admin.fedoraproject.**org/mailman/listinfo/389-users<https://a...