Conductor rpms from source

[Justin Clift]

Hi guys,

Updating the steps for building Conductor rpms from source.

Does this look ok for F14?

******************************************************************************

First, follow the steps in http://www.aeolusproject.org/conductor-install.html

1. Install the required development packages:

$ sudo yum install classads-devel rest-devel

2. Clone the Conductor git repository:

$ git clone git://git.fedorahosted.org/git/aeolus/conductor.git -b next

3. Create the Conductor rpms:

$ cd conductor
  $ ./autogen.sh
  $ make rpms

The RPMs are then built and placed in ~/rpmbuild/RPMS.  Two rpms will be in the
"noarch" subdirectory, with the rest being in either "i386" or "x86_64"
depending upon your architecture:

$ ls -la ~/rpmbuild/RPMS/x86_64/
  total 1320
  drwxr-xr-x. 2 jc jc    4096 Apr 21 19:33 .
  drwxr-xr-x. 4 jc jc    4096 Apr 21 19:33 ..
  -rw-r--r--. 1 jc jc    2236 Apr 21 19:33 aeolus-all-0.0.3-0.fc14.20110421093247git318d726.x86_64.rpm
  -rw-r--r--. 1 jc jc 1195376 Apr 21 19:33 aeolus-conductor-0.0.3-0.fc14.20110421093247git318d726.x86_64.rpm
  -rw-r--r--. 1 jc jc   16872 Apr 21 19:33 aeolus-conductor-daemons-0.0.3-0.fc14.20110421093247git318d726.x86_64.rpm
  -rw-r--r--. 1 jc jc   37952 Apr 21 19:33 aeolus-conductor-debuginfo-0.0.3-0.fc14.20110421093247git318d726.x86_64.rpm
  -rw-r--r--. 1 jc jc   66324 Apr 21 19:33 aeolus-conductor-devel-0.0.3-0.fc14.20110421093247git318d726.x86_64.rpm
  -rw-r--r--. 1 jc jc   10792 Apr 21 19:33 aeolus-conductor-doc-0.0.3-0.fc14.20110421093247git318d726.x86_64.rpm

$ ls -la ~/rpmbuild/RPMS/noarch/
  total 68
  drwxr-xr-x. 2 jc jc  4096 Apr 21 19:32 .
  drwxr-xr-x. 4 jc jc  4096 Apr 21 19:33 ..
  -rw-r--r--. 1 jc jc 30756 Apr 21 19:32 rubygem-image_factory_connector-0.0.2-1.fc14.20110421093247git318d726.noarch.rpm
  -rw-r--r--. 1 jc jc 28096 Apr 21 19:32 rubygem-image_factory_console-0.2.0-1.fc14.20110421093247git318d726.noarch.rpm

Seems pretty simple and they look to have built ok.

Regards and best wishes,

Justin Clift

--
Aeolus Community Manager
http://www.aeolusproject.org

[Chris Lalancette]

On 04/21/11 - 07:46:06PM, Justin Clift wrote:
> Hi guys,
>
> Updating the steps for building Conductor rpms from source.
>
> Does this look ok for F14?

Yep, this looks fine.

On 04/21/2011 03:01 PM, Chris Lalancette wrote:
> On 04/21/11 - 07:46:06PM, Justin Clift wrote:
> > Hi guys,
> >
> > Updating the steps for building Conductor rpms from source.
> >
> > Does this look ok for F14?
>
> Yep, this looks fine.

Good job. My pitty that it wasnt done yesterday, because I didn't know 
about 1st step :) Fortunatelly I figured out it by myself.

--
Jozef