I would like to introduce myself to the group. I have recently
received an IGEPv2 board , which is based on the Beagle Board, but
with wifi, bluetooth, ethernet, and more RAM. I'm still at the "wow,
it's tiny and it runs Linux" stage. I should get a bit more time over
the next month and Christmas to play around properly with it.
I'm new to embedded development, but neither new to Linux nor ARM
(writing my first ARM assembly some 15 years ago). However, for the
past 6 years I've not even built a Linux kernel, preferring to use the
default kernel in Fedora for simplicity :)
Firstly, a thank you to those involved in Fedora ARM for getting it to
this stage. If I get the time, I'd really like to contribute some
(probably small) effort to help get Fedora ARM working well on the
IGEPv2 and Beagle Board. As I progress, I'd like to know what I can
do to help.
In the meantime, I have some questions. Apologies in advance if these
1) There are various different kernels from different sources. I'm
used to there being a small set of "right" kernels (that is, Fedora's
idea of "right") for x86. I fully appreciate that different ARM-based
boards are quite different in capabilities (like different instruction
a) Is there likely to be some standardised vanilla Fedora ARM kernel
source? (Or is that simply the source RPM available for Fedora?)
Then patches /could/ be offered for the more common systems (e.g.
Beagle Board & clones, SheevaPlug).
b) Would it then make sense to offer these as pre-built RPMs for common systems?
c) Is there any guidance on which version is good to use as a base?
I've seen quite different kernel versions being used (from 2.6.27 to
2) I understand a little bit about the different calling conventions,
FP differences (e.g. soft FPU versus VFP), and instruction set
differences (v5 versus v7).
a) Can the kernel can be safely built with a different instruction set
targeted? (I know there are different optimisation options passed to
GCC. Apologies if this seems a bit newbie-ish.)
b) For FP-heavy programs (e.g. ogg encoding), is it possible to build
the packages with VFP/NEON but still get them to work in a soft FPU
system? I'd imagine any call to an external library would have to
somehow be defined to use a different calling standard.
3) There seem to be some missing dependencies in the packages in the
current Fedora ARM repository. For example, emacs is requiring
libotf, which doesn't seem to be there in the repository. And
likewise with the xorg-x11-font* packages needing ttmkdir. I'm
confused as to how the RPM could have been successfully built without
it. What am I missing?
4) I see there has been some discussion over unaligned data access.
(Oh, I remember that from the ARM2 days.) It seems as if the
Cortex-A8 cores allow unaligned data access when set up to do so .
Does this, in any way, help with the compatibility of packages
5) I've managed to get various source packages missing from the Fedora
ARM repositories to compile successfully (natively). I guess there is
a reason why there are not in the repos right now -- is that reason
down to time and priorities, or is there some blocking bugs with many
of these packages?
I look forward to being able to contribute something back into Fedora!
I would like to create a rootfs image with a minimal set of software
(busybox) for a target ARM device.
Given a toolchain for the target hardware, what is the recommended
method to cross-compile, build RPM packages?
I guess, the cross-toolchain can be packaged separately for x86.
Appreciate any inputs,
Hello to all,
I have recently replaced F11 with F12 on my sheevaplug an I came
across strange php error. Following php script:
outputs 5.2894475160536E-315 instead of 0.25.
On F11 everything worked without problems.
Thank you for any suggestions an kind regards
I have built kernel 220.127.116.11 with modules and a generic ramdisk that
works for some combinations of Kirkwood-based devices (Sheevaplug and
QNAP TS-19) and devices carrying the root filesystem. They are
available together with my build scripts at http://fedora.danny.cz/arm/
- kernel config now sets CONFIG_LSM_MMAP_MIN_ADDR=4096 (adviced by Eric
- the ramdisk is now generated with dracut instead of mkinitrd
Using dracut for preparing the ramdisk has many advantages:
- one ramdisk works on a whole platform, but creating host-specific
ramdisks is still possible
- allows to explicitly specify block device drivers and filesystems that
are included, that sets the array of allowed block device and filesystem
type combinations for the root filesystem
- allows to enable features like RAID and crypto for root
- root filesystem device is set on the kernel command line only, it's
not hardcoded anywhere, but the drawback is it needs to be set in the
uboot environment via console
- no hand-coded hacks are needed
I'm trying out the fedora-arm(*rootfs-f12.tar.bz2*) over qemu using the *
zImage-versatile-2.6.24-rc7.armv5tel* available at the fedora-arm site.
During the boot process, the *system stops at the console asking for a login
*. Something like:
*Fedora release 12 (Constantine)
Kernel 2.6.24-rc7 on an armv5tel (tty1)
The GUI does NOT start. How do i proceed to login to the system?
During the boot process i observed the following error as well - "Starting
Udev: modprobe: FATAL: Could not load /lib/modules/2.6.24-rc7/moodules.dep
No such file or directory"
I'm launching QEMU with(running as root):
*#qemu-system-arm -M versatilepb -kernel
zImage-versatile-2.6.24-rc7.armv5tel -hdc rootfs-f12-dev -append root="0800"
-net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=./qemu-ifup.sh
My host is a 32 bit F12.
Any pointers will be really helpful.