I pulled out my test Cubietruck and set up the F29 beta.
I plugged the VGA into my KVM and powered up. When it got to the GUI
part, the system hung. I unplugged the VGA and plugged in the HDMI. No
I powered cycled and with the HDMI pluggd in, I got into Initial Setup
and things progressed well from there.
After a bit with the HDMI, I unplugged it and plugged in the VGA.
Nothing. Switched back to HDMI and it worked.
I seem to recall some previous work, maybe F24, of having VGA working.
Memory is cobwebally.
Is VGA support in the uboot for Cubietruck? Or is this some other problem?
I'm Alberto from the Marketing team, I'm asking for help to complete
the Fedora 29 Talking points.
Talking points are key highlights of the new release. There are
different types of talking points for different types of people:
general desktop users/everyone, developers, and sysadmins. They are
meant to provide a short, effective answer to the question "What cool
stuff is in the latest release of Fedora?" They are compelling, not
Alberto Rodriguez Sanchez <bt0dotninja(a)fedoraproject.org>
On my Xfce desktop (well VNCed into it) as me. I inserted a usb
device. It shows up as an icon in tghe workspace. I go to mount it and
get "Not authorized to perform operation".
Nothing interesting on the console:
[ 2525.137522] usb 1-1: new high-speed USB device number 3 using
[ 2525.283687] usb 1-1: New USB device found, idVendor=0951,
idProduct=1603, bcdDevice= 2.00
[ 2525.292069] usb 1-1: New USB device strings: Mfr=1, Product=2,
[ 2525.299380] usb 1-1: Product: DataTraveler 2.00000025168
[ 2525.304990] usb 1-1: Manufacturer: Kingston
[ 2525.309342] usb 1-1: SerialNumber: 0000025168
[ 2525.645759] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2525.658504] scsi host1: usb-storage 1-1:1.0
[ 2525.663628] usbcore: registered new interface driver usb-storage
[ 2525.737957] usbcore: registered new interface driver uas
[ 2526.731250] scsi 1:0:0:0: Direct-Access Kingston DataTraveler 2.0
1.00 PQ: 0 ANSI: 2
[ 2526.752509] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2526.752591] sd 1:0:0:0: [sdb] 1952256 512-byte logical blocks: (1000
[ 2526.776457] sd 1:0:0:0: [sdb] Write Protect is off
[ 2526.797671] sd 1:0:0:0: [sdb] No Caching mode page found
[ 2526.803174] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 2526.835704] sdb:
[ 2526.844064] sd 1:0:0:0: [sdb] Attached SCSI removable disk
what do I have to do so a user can mount a USB device?
After the dnf update, updating some 130 rpms from testing-update, I did
a poweroff then powered back up.
I see the following message on the console just before the login:
[ 72.898695] systemd-journald: File
corrupted or uncleanly shut down, renaming and replacing.
Fedora 29 (Twenty Nine)
Kernel 4.18.5-300.fc29.armv7hl on an armv7l (ttyS0)
localhost login: root
I bought a Udoo Neo and put Fedora on it.
It works well, but when I plug in USB devices, they don't show up.
Is USB on Udoo Neo known to work ?
I thought I'd ask before trying to isolate it (I'll download "udoobuntu").
Please share any tips on how to isolate the problem.
It could be a personal problem : I bought it from EBay.
On my Xfce desktop (well VNCed into it) as me. 1st time I ever tried
audio on a Cubie...
I plugged a speaker into the headphones and played an mp3 via Parole
media player (No vlc or mplayer available to install).
I plugged in a USB audio device:
[ 5157.721519] usb 2-1: new full-speed USB device number 4 using
[ 5157.928911] usb 2-1: New USB device found, idVendor=0d8c,
idProduct=000e, bcdDevice= 1.00
[ 5157.937308] usb 2-1: New USB device strings: Mfr=0, Product=1,
[ 5157.944625] usb 2-1: Product: Generic USB Audio Device
[ 5158.365716] cm109: Keymap for Komunikate KIP1000 phone loaded
[ 5158.377267] input: CM109 USB driver as
[ 5158.402617] usbcore: registered new interface driver cm109
[ 5158.408249] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[ 5158.712311] usbcore: registered new interface driver snd-usb-audio
And no sound from it. Plus it is not showing as an audio device to
On my Xfce desktop (well VNCed into it) as me. I installed K3B. I
attached my optical drive:
[ 4116.026662] usb 1-1: new high-speed USB device number 5 using
[ 4116.170155] usb 1-1: New USB device found, idVendor=054c,
idProduct=031f, bcdDevice= 0.00
[ 4116.178598] usb 1-1: New USB device strings: Mfr=1, Product=2,
[ 4116.185943] usb 1-1: Product: DRX-840U
[ 4116.189887] usb 1-1: Manufacturer: Sony
[ 4116.193909] usb 1-1: SerialNumber: DRX840UMP0000019EA5
[ 4116.204616] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 4116.216973] scsi host1: usb-storage 1-1:1.0
[ 4117.281691] scsi 1:0:0:0: CD-ROM SONY DVD RW DRU-840A
SS01 PQ: 0 ANSI: 0
[ 4117.324237] sr 1:0:0:0: Power-on or device reset occurred
[ 4117.390181] sr 1:0:0:0: [sr0] scsi3-mmc drive: 12x/40x writer dvd-ram
cd/rw xa/form2 cdda tray
[ 4117.398984] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4117.429889] sr 1:0:0:0: Attached scsi generic sg1 type 5
Inserted a blank CD and started K3B. Got the message:
No optical drive found.
K3b did not find any optical device in your system.
What do I have to do for the K3B to see the drive?