Re: Image/Support for FriendlyARM NanoPi R4S
by Nayla Nikolic
On 14.06.2024 07:52, Peter Boy wrote:
> That page refers to Fedora F25 and was last edited April 5, 2017
>
> If you install arm-image-installer und uboot-images-armv8-2024.04-1.fc40.noarch you can check for supported boards by
>
> $ arm-image-installer —-supported
>
> There you find support for a nanopi-r4s-rk3399
Thank you very much
Does arm-image-installer also work on Ubuntu and/or Debian
(https://pagure.io/arm-image-installer)? I can't find a *.deb.
Happy day
Nayla
3 days, 20 hours
Questions to Fedora on Rock 5B
by Andreas Reschke
Hello
1. Audio
on this side
https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-...
is shows Headphone Jack Playback is enable with 6.4-rc1
What does this mean?
I didn't found any soundcard on my device
root@rockpi5:~# inxi -A
Audio:
Message: No device data found.
API: ALSA v: k6.10.0-0.rc2.20240607git8a92980606e3.28.fc41.aarch64
status: kernel-api
Server-1: PipeWire v: 1.1.82 status: active
root@rockpi5:~#
2. GPU
I know the GPU isn't complete at the moment, how to load the kernel
driver panthor at boot time ?
Greetings
Andreas
6 days, 16 hours
Fedora on Rock 5B
by Andreas Reschke
Hi there,
I've tried to install Fedora on my Rock 5 without success.
Booting with
https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock...
on SD-Card and source from
https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everyth....
Board boots up fine but later starting in loop with
350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda
installer errors end ###############
[ 352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:
timeout, still waiting for following initqueue hooks:
[ 352.161387] dracut-initqueue[1065]: Warning:
/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e
"/dev/root" ]"
[ 352.164564] dracut-initqueue[1065]: Warning:
/lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop"
-ge "10" ]"
[ 352.167716] dracut-initqueue[1065]: Warning:
/lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
/tmp/settle.done ]"
[ 352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:
starting timeout scripts
[ 352.172610] dracut-initqueue[1065]: Warning: ############# Anaconda
installer errors begin #############
[ 352.172852] dracut-initqueue[1065]: Warning: #
#
[ 352.173097] dracut-initqueue[1065]: Warning: It seems that the boot
has failed. Possible causes include
[ 352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or
inst.repo boot parameters on the
[ 352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please
verify that you have specified
[ 352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 352.173918] dracut-initqueue[1065]: Warning: Please also note that
the 'inst.' prefix is now mandatory.
[ 352.174156] dracut-initqueue[1065]: Warning: #
#
[ 352.174354] dracut-initqueue[1065]: Warning: #### Installer
errors encountered during boot: ####
[ 352.174543] dracut-initqueue[1065]: Warning: #
#
[ 352.174775] dracut-initqueue[1065]: Warning: Reason unknown
[ 352.174970] dracut-initqueue[1065]: Warning: #
#
Full log file: see rock.txt
Has anybody more succcess ?
Greetings
Andreas
6 days, 18 hours
GPU accelerated with panthor on ROCK 5 Model B
by Andreas Reschke
Hi there,
today the first Kernel 6.10 with panthor was released. How to enable the
driver?
modprobe panthor
root@rockpi5:~# lsmod | grep panthor
panthor 163840 0
drm_gpuvm 36864 1 panthor
drm_exec 12288 2 drm_gpuvm,panthor
gpu_sched 61440 1 panthor
root@rockpi5:~#
root@rockpi5:~# inxi -G
Graphics:
Message:No PCI device data found.
Display:unspecified server:X.Org v:24.1 with:Xwayland v:24.1.0
driver:X:loaded:modesetting dri:swrast gpu:N/A
resolution:1920x1080~60Hz
API:EGL v:1.5 drivers:kms_swrast,swrast
platforms:gbm,x11,surfaceless,device
API:OpenGL v:4.5 vendor:mesa v:24.1.0 renderer:llvmpipe (LLVM 18.1.6
128 bits)
API:Vulkan v:1.3.283 drivers:N/A surfaces:xcb,xlib
root@rockpi5:~#
Greetings
Andreas
1 week, 6 days