I would have thought the first .dtb you were using was the correct one for you. I'm surprised the LABEL=_/ option doesn't work. Maybe run blkid and double check the UUID? Can you post the partition table? I only see p1 - p3.
On Mar 1, 2015, at 12:12 AM, Sergio Durigan Junior sergiodj@sergiodj.net wrote:
On Saturday, February 28 2015, Scott M. Jones wrote:
I'm booting F21 LXDE successfully on Beagleboard xM rev B. Different DTB but the rest should be the same. Comparing mine to yours you may be loading the kernel at the wrong address. I'm not really using the boot.scr.
More info here including my uEnv.txt: https://lists.fedoraproject.org/pipermail/arm/2015-January/008901.html
Thanks for the reply, Scott. Actually, your post was one of the first ones I saw, and apparently I should have paid more attention to it :-).
Well, I don't think the problem is loading the Linux kernel at the wrong address, but rather using the wrong dtb file. I was using omap3-beagle-xm.dtb, but when I replaced that by omap3-beagle-xm-ab.dtb, at least I got the kernel to boot. I am not really sure the -ab version fully works with rev C, but that's the best I've gotten now, apparently.
*However*, that did not really solve everything for me, because now I am seeing errors during the boot, and I can't get the boot to complete. Here's the full log:
http://fpaste.org/191874/51860941/
The real problem is getting the root right here, I think (although I also don't think the error messages are good too). I check the UUID of the partition and it's all good; I also tried using the LABEL=_/ value in the root= parameter, but it didn't work also.
Ideas here? Thanks,
-- Sergio GPG key ID: 0x65FC5E36 Please send encrypted e-mail if possible http://sergiodj.net/