Hopefully I did something wrong, but it's not working at all for me on
the beaglebone black:
Here is what I get when I try to boot from eMMC:
U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear
spl: mmc init failed: err - -19
### ERROR ### Please RESET the board ###
Here is what I get when I make a new SD card from the latest minimal image:
U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
Watchdog enabled
I2C: ready
DRAM: 512 MiB
NAND: 0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Error - No Valid Environment Area found
*** Warning - bad CRC, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Card did not respond to voltage select!
Booting from nand ...
no devices available
no devices available
Bad Linux ARM zImage magic!
When I am in the uboot command processor, I cannot select the internal
eMMC at all:
U-Boot# mmc dev 1
Card did not respond to voltage select!
Previously, I was booting with no problems from either eMMC or SD with F21.
Thanks,
Adam
On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson <pbrobinson(a)gmail.com> wrote:
Hi All,
Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21.
https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
This release contains numerous fixes and improvements over the
currently shipping release including, but by no means limited to:
* Upstream generic distro support (huge thanks to Dennis Gilmore and
Steven Warren for their tireless work to get this upstream
* AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for
this tireless work on this)
* Numerous other improvements too long to name.
New devices that we now enable in this release, in no particular order, include:
AllWinner:
A10-OLinuXino-Lime
A10s-OLinuXino-M
A13-OLinuXino
A13-OLinuXinoM
A20-OLinuXino_MICRO
Bananapi
Cubieboard
Cubieboard2
Cubietruck
Mele_A1000
Mele_A1000G
Mini-X
Mini-X-1Gb
Tegra:
jetson-tk1
i.MX6
cm_fx6 (Utilite)
riotboard
It's not yet in nightly builds but I'm going to request it for the
next Beta TC compose.
Known issues:
* Panda is not yet ported to generic distro support
Please test and provide feedback.
Peter
_______________________________________________
arm mailing list
arm(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/arm