Ken,
Peter
Where might find aarch64 *.xz sda image?? for rawhide??
We produce Workstaion, Server and Minimal for aarch64, for all the
Spins it's up to the Spins maintainers to request they get added for a
particular architecture and for the Spins maintainers to assist in
supporting them. I would suggest you reach out to the maintainer of
which ever spin you prefer.
FC29_1.2 does NOT have orangepi_prime
There's no need to yell...
Fedora 29 GA, AKA the 1.2 you refer to above shipped with
uboot-tools-2018.09-1.fc29 which has in the
uboot-images-armv8-2018.09-1.fc29 sub package the following 64 bit
Orange Pi models:
orangepi_one_plus orangepi_pc2 orangepi_prime orangepi_win
orangepi_zero_plus orangepi_zero_plus2
In fact initial upstream U-Boot support for this device landed in May 2017.
Type 'YES' to proceed, anything else to exit now = Proceed?
yes = Writing: = Fedora-Workstation-29-1.2.aarch64.raw.xz = To: /dev/sdd .... 0+1038205
records in 0+1038205 records out 11811160064 bytes (12 GB, 11 GiB) copied, 1997.52 s, 5.9
MB/s = Writing image complete! = No U-Boot files found for orangepi_prime. = Installation
Complete! Insert into the orangepi_prime and boot.
It works just fine for me:
# arm-image-installer
--image=Fedora-Workstation-29-1.2.aarch64.raw.xz
--target=orangepi_prime --media=/dev/sdb
=====================================================
= Selected Image:
= Fedora-Workstation-29-1.2.aarch64.raw.xz
= Selected Media : /dev/sdb
= U-Boot Target : orangepi_prime
=====================================================
*****************************************************
*****************************************************
******** WARNING! ALL DATA WILL BE DESTROYED ********
*****************************************************
*****************************************************
Type 'YES' to proceed, anything else to exit now
= Proceed? yes
= Writing:
= Fedora-Workstation-29-1.2.aarch64.raw.xz
= To: /dev/sdb ....
0+909233 records in
0+909233 records out
11811160064 bytes (12 GB, 11 GiB) copied, 865.543 s, 13.6 MB/s
= Writing image complete!
= Writing sunxi-spl.bin for orangepi_prime ....
4+0 records in
4+0 records out
32768 bytes (33 kB, 32 KiB) copied, 0.00203287 s, 16.1 MB/s
= Writing u-boot FIT image for orangepi_prime ....
72+1 records in
72+1 records out
597064 bytes (597 kB, 583 KiB) copied, 0.0474322 s, 12.6 MB/s
= Installation Complete! Insert into the orangepi_prime and boot.
A question, do you have a local install of uboot bits ("rpm -qa | grep
uboot") on the device which you're running arm-image-installer from?
If so what version, what version of arm-image-installer?