Best bet for usb3 is likely to file an upstream kernel bug and work with the author. It
will likely need someone to bisect where it failed using the upstream kernels and
processes.
Dennis
On 28 August 2017 6:22:12 pm GMT-05:00, Stewart Samuels <searider74(a)gmail.com>
wrote:
HI Dennis,
I've now got the system booting from the eMMC card.
Thanks again for the tip. I noticed earlier as well that the mmc_block
module was not being loaded. I tried adding the mmc_block and
pwrseq_emmc modules as kernel parameters on the append line of the
extlinux.conf file but that failed. Rebuilding them into the initramfs
image was the key and works but only if one updates the UUID
information
for the devices in both extlinux.conf and /etc/fstab.
I am currently in process of performing a "dnf update", to update to
the
latest release information.
BTW, any new thoughts on getting the USB 3 Hub to recognize devices?
Kind regards,
Stewart
On 08/28/2017 11:03 AM, Dennis Gilmore wrote:
> El jue, 24-08-2017 a las 16:47 -0700, Stewart Samuels escribió:
>> All,
>>
>> I have been working toward getting the Odroid-Xu4 to boot from the
>> eMMC card but the system continues to fail in the same place no
>> matter what I try. It dumps me into the dracut shell when it cannot
>> find the root partition. I suspect one or more modules are not
being
>> loaded when booting from the eMMC. Following is my serial console
>> output along with some output from the dracut shell. Does anyone
>> have any ideas of what to try next?
> you will need to rebuild the initrd pwrseq_emmc driver is missing
from
> the initrd for it to boot
>
> simplest would be in a odroid-xu4 running from microsd
>
> mount /dev/mmcblk1p4 /mnt/
> [ 192.561457] EXT4-fs (mmcblk1p4): mounted filesystem with ordered
> data mode. Opts: (null)
> [root@localhost ~]# mount /dev/mmcblk1p2 /mnt/boot/
> [ 199.515666] EXT4-fs (mmcblk1p2): mounted filesystem with ordered
> data mode. Opts: (null)
> [root@localhost ~]# mount -o bind /proc/ /mnt/proc/
> [root@localhost ~]# mount -o bind /dev /mnt/dev/
> [root@localhost ~]# mount -o bind /sys /mnt/sys/
> [root@localhost ~]# chroot /mnt/
> [root@localhost /]# ls /boot/initramfs-4.11.8-300.fc26.armv7hl.img
> /boot/initramfs-4.11.8-300.fc26.armv7hl.img
> [root@localhost /]# dracut -f /boot/initramfs-4.11.8-
> 300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl
--add-drivers=pwrseq_emmc
> dracut: No '/dev/log' or 'logger' included for syslog logging
> [ 266.023281] dracut[1123] No '/dev/log' or 'logger' included for
> syslog logging
> [ 266.525885] dracut[1123] Executing: /usr/bin/dracut -f
> /boot/initramfs-4.11.8-300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl
--
> add-drivers=pwrseq_emmc
> [ 268.332160] dracut[1123] dracut module 'busybox' will not be
> installed, because command 'busybox' could not be found!
> [ 271.270476] dracut[1123] dracut module 'biosdevname' will not be
> installed, because command 'biosdevname' could not be found!
> [ 272.332576] dracut[1123] dracut module 'busybox' will not be
> installed, because command 'busybox' could not be found!
> [ 275.163080] dracut[1123] *** Including module: bash ***
> [ 275.271157] dracut[1123] *** Including module: systemd ***
> [ 277.999389] dracut[1123] *** Including module: systemd-initrd ***
> [ 278.258202] dracut[1123] *** Including module: nss-softokn ***
> [ 278.391379] dracut[1123] *** Including module: i18n ***
> [ 279.961126] dracut[1123] *** Including module: network ***
> [ 280.840479] dracut[1123] *** Including module: ifcfg ***
> [ 280.944682] dracut[1123] *** Including module: drm ***
> [ 281.289211] dracut[1123] *** Including module: plymouth ***
> [ 287.496441] dracut[1123] *** Including module: kernel-modules ***
> [ 292.246621] dracut[1123] *** Including module: kernel-network-
> modules ***
> [ 292.708417] dracut[1123] *** Including module: rootfs-block ***
> [ 292.848379] dracut[1123] *** Including module: terminfo ***
> [ 293.002630] dracut[1123] *** Including module: udev-rules ***
> [ 293.119264] dracut[1123] Skipping udev rule: 40-redhat.rules
> [ 293.141983] dracut[1123] Skipping udev rule: 50-firmware.rules
> [ 293.164948] dracut[1123] Skipping udev rule: 50-udev.rules
> [ 295.151142] dracut[1123] Skipping udev rule: 91-permissions.rules
> [ 295.175105] dracut[1123] Skipping udev rule: 80-drivers-
> modprobe.rules
> [ 295.413595] dracut[1123] *** Including module: dracut-systemd ***
> [ 296.271524] dracut[1123] *** Including module: usrmount ***
> [ 296.333878] dracut[1123] *** Including module: base ***
> [ 296.920925] dracut[1123] *** Including module: fs-lib ***
> [ 297.128453] dracut[1123] *** Including module: shutdown ***
> [ 297.775668] dracut[1123] *** Including modules done ***
> [ 297.894924] dracut[1123] *** Installing kernel module dependencies
> ***
> [ 298.210530] dracut[1123] *** Installing kernel module dependencies
> done ***
> [ 298.345975] dracut[1123] *** Resolving executable dependencies ***
> [ 307.763333] dracut[1123] *** Resolving executable dependencies
> done***
> [ 307.935750] dracut[1123] *** Hardlinking files ***
> [ 308.148979] dracut[1123] *** Hardlinking files done ***
> [ 308.177952] dracut[1123] *** Stripping files ***
> [ 311.695060] dracut[1123] *** Stripping files done ***
> [ 311.720850] dracut[1123] *** Generating early-microcode cpio image
> ***
> [ 311.816458] dracut[1123] *** Constructing AuthenticAMD.bin ****
> [ 311.986099] dracut[1123] *** Store current command line parameters
> ***
> [ 312.021042] dracut[1123] Stored kernel commandline:
> [ 312.045569] dracut[1123] No dracut internal kernel commandline
> stored in the initramfs
> [ 312.072734] dracut[1123] *** Creating image file '/boot/initramfs-
> 4.11.8-300.fc26.armv7hl.img' ***
> [ 375.498351] dracut[1123] *** Creating initramfs image file
> '/boot/initramfs-4.11.8-300.fc26.armv7hl.img' done ***
> [root@localhost /]# exit
> exit
> [root@localhost ~]# reboot
>
> it should then boot. I plugged in the emmc from my pinebook to see if
> it worked. u-boot is not loading from it but its otherwise working
okay
>
> Dennis
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.