Hello Paul,
That is a good news. I think that the issue is around the dracut steps
... So I'll investigate.
I want to avoid doing a full re-install.
Kind regards
Patrick
On 2018-06-05 17:28, Paul Whalen wrote:
> Hi Patrick,
>
> ----- Original Message -----
>> Kernel 4.16.8-300 is the latest one which can get my RPI3B+ booting.
>
> I'm currently running 4.16.13-300.fc28.armv7hl on the Rpi3B+ and don't
> see
> those errors. Looks like the mSD might be corrupt.
>
> [root@localhost ~]# uname -r
> 4.16.13-300.fc28.armv7hl
> [root@localhost ~]# cat /proc/device-tree/model
> Raspberry Pi 3 Model B+
>
> Paul
>
>>
>> - Kernel Panic at boot time
>>
>> For now I have found a lot of dracut error in the log during the dnf
>> upgrade
>> process
>>
>> Jun 04 18:12:37 pi3 dracut[2448]: *** Including module: fs-lib ***
>> Jun 04 18:12:38 pi3 dracut[2448]: FAILED:
>> /usr/lib/dracut/dracut-install -D
>> /var/tmp/dracut.Nmhf4U/initramfs -l
>> /usr/lib/dracut/modules.d/99fs-lib/fs-lib.sh /lib/fs-lib.sh
>> Jun 04 18:12:38 pi3 dracut[2448]: FAILED:
>> /usr/lib/dracut/dracut-install -D
>> /var/tmp/dracut.Nmhf4U/initramfs /etc/e2fsck.conf
>> Jun 04 18:12:38 pi3 dracut[2448]: *** Including module: shutdown ***
>> Jun 04 18:12:38 pi3 dracut[2448]: FAILED:
>> /usr/lib/dracut/dracut-install -D
>> /var/tmp/dracut.Nmhf4U/initramfs -a -l umount poweroff reboot halt
>> losetup
>> stat
>> Jun 04 18:12:38 pi3 dracut[2448]: FAILED:
>> /usr/lib/dracut/dracut-install -D
>> /var/tmp/dracut.Nmhf4U/initramfs -l
>> /usr/lib/dracut/modules.d/99shutdown/shutdown.sh /shutdown
>> Jun 04 18:12:39 pi3 dracut[2448]: *** Including modules done ***
>> Jun 04 18:12:39 pi3 dracut[2448]: *** Installing kernel module
>> dependencies
>> ***
>> Jun 04 18:12:39 pi3 dracut[2448]: FAILED:
>> /usr/lib/dracut/dracut-install -D
>> /var/tmp/dracut.Nmhf4U/initramfs
>> /lib/modules/4.16.13-300.fc28.armv7hl//modules.builtin.bin
>> /lib/modules/4.16.13-300.fc28.armv7hl/modules.builtin.bin
>> Jun 04 18:12:39 pi3 dracut[2448]: FAILED:
>> /usr/lib/dracut/dracut-install -D
>> /var/tmp/dracut.Nmhf4U/initramfs
>> /lib/modules/4.16.13-300.fc28.armv7hl//modules.builtin
>> /lib/modules/4.16.13-300.fc28.armv7hl/modules.builtin
>> Jun 04 18:12:39 pi3 dracut[2448]: FAILED:
>> /usr/lib/dracut/dracut-install -D
>> /var/tmp/dracut.Nmhf4U/initramfs
>> /lib/modules/4.16.13-300.fc28.armv7hl//modules.order
>> /lib/modules/4.16.13-300.fc28.armv7hl/modules.order
>> Jun 04 18:12:39 pi3 dracut[2448]: "depmod -a 4.16.13-300.fc28.armv7hl"
>> failed.
>> _______________________________________________
>> arm mailing list -- arm(a)lists.fedoraproject.org
>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>> Fedora Code of Conduct:
https://getfedora.org/code-of-conduct.html
>> List Guidelines:
>>
https://fedoraproject.org/wiki/Mailing_list_guidelines
>> List Archives:
>>
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org...
>>