Okay. I can confirm I can now boot the USB device to completion. I was
also successfully able to upgrade the system using the "dnf -y update"
command and reboot successfully using the newer kernel. The key was NOT
to create a new initramfs image after changing the UUIDs for the root
partition. As well, the cpuidle.off=1 kernel boot parameter was
required in the extlinux.conf file.
I did NOT concatenate the u-boot.bin and u-boot.dtb files. I just
flashed the u-boot.bin with the other files from Hardkernel that Dennis
specifies below.
There are two problems I see right off the bat. First, as Dennis
mentions, the USB3 ports do not work. Second, only 4 of the 8 cpus seem
to be working based on a top command. Even so, the system actually
seems pretty responsive and usable.
I will now attempt to get the system installed on the eMMC card. I will
report on that progress later.
Stewart
On 08/23/2017 04:39 PM, Dennis Gilmore wrote:
El mié, 23-08-2017 a las 14:43 -0700, Stewart Samuels escribió:
> HI Dennis
>
> Examining your process stated below, did you really append the u-
> boot.dtb to the u-boot.bin file in the u-boot-dtb.bin file? Why did
> you concatenate them? That seems out of the norm. Why not just
> flash the u-boot.bin file provided by Fedora?
>
> Regards,
> Stewart
I did concatnate them. From experience u-boot will load the dtb from
the end of the u-boot binary. and u-boot needs the dtb in modern u-
boots to define the hardware. u-boot build process for some boards does
the concatnation, not sure if the xu3 u-boot makes a u-boot-dtb.bin
file and we do not ship it, or its just not making it.
Dennis
> On 08/23/2017 08:43 AM, Dennis Gilmore wrote:
>> El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:
>>> Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
>>> --
>>>
>>> Hello Dennis,
>>>
>>> that looks beautiful. You have a running Odroid-XU4 with actual
>>> Kernel
>>> with Fedora 26 !!
>>>
>>> How did you manage it? I haven't so much luck with the
>>> installation.
>>>
>>> Thanks
>>> Andreas
>> I ran
>>
>> xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
>> cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
>> cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
>> I grabbed from
https://github.com/hardkernel/u-boot/tree/odroidxu4-
>> v201
>> 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
>> tzsw.bin.hardkernel and sd_fusing.sh
>> then ran
>> sh sd_fusing.sh /dev/sdb
>> I used parted to resize partition 4 mounted it and ran xfs_growfs
>> so it
>> filled the sd card
>>
>> I mounted partition 2 and edited extlinux/extlinux.conf adding
>> cpuidle.off=1 to the append line. I did have to edit etc/passwd and
>> unlock the root account as initial-setup is not running.
>>
>> of couse /dev/sdb was my sdcard, make sure you have the right
>> device
>> for yours. It does seem that the nic is not detected however.
>>
>> Dennis
>>
>>
>> _______________________________________________
>> arm mailing list -- arm(a)lists.fedoraproject.org
>> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
>
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
_______________________________________________
arm mailing list -- arm(a)lists.fedoraproject.org
To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org