-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Tue, 17 Sep 2013 10:18:42 -0400
Jochen De Smet <jochen.arm(a)leahnim.org> wrote:
Just add --add-drivers "ehci-orion" to the dracut commandline; I
actually see the same when
building the initrd for my mirabox; no idea why it doesn't know to
include it by default.
J.
dracut will need patching to support it. what were the last working
kernels?
Dennis
On 9/17/2013 4:16, Quentin Armitage wrote:
> I have tried booting a Dreamplug with the 3.10.10 kernel, but it
> fails to boot successfully, and I would appreciate some guidance as
> to how to work around the problem.
>
> The symptoms are that it drops into dracut, reporting that it
> cannot find the root filesystem on /dev/sdb3 (another Dreamplug
> with slightly different config does exactly the same but
> with /dev/sda2).
>
> I think the problem is that the ehci-orion driver is not being
> loaded.
>
> On the Fedora kernel, I get the following messages at boot:
> [ 18.767308] libphy: Fixed MDIO Bus: probed
> [ 18.771637] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver [ 18.778214] ehci-pci: EHCI PCI platform driver
> [ 18.782734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI)
> Driver [ 18.788992] uhci_hcd: USB Universal Host Controller
> Interface driver [ 18.795633] usbcore: registered new interface
> driver usbserial [ 18.801524] usbcore: registered new interface
> driver usbserial_generic [ 18.808129] usbserial: USB Serial
> support registered for generic [ 18.814399] mousedev: PS/2 mouse
> device common for all mice
>
> Booting with a kernel from
http://www.xilka.com/sheeva/, I get
> [ 6.911191] libphy: orion_mdio_bus: probed
> [ 6.911386] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver
> version 1.4
> [ 6.912865] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0
> with MAC address f0:ad:4e:00:84:db
> [ 6.914207] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0
> with MAC address f0:ad:4e:00:84:dc
> [ 6.914353] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver [ 6.914359] ehci-pci: EHCI PCI platform driver
> [ 6.914506] ehci-orion: EHCI orion driver
> [ 6.914597] orion-ehci f1050000.ehci: EHCI Host Controller
> [ 6.914621] orion-ehci f1050000.ehci: new USB bus registered,
> assigned bus number 1
> [ 6.914754] orion-ehci f1050000.ehci: irq 19, io mem 0xf1050000
> [ 6.934742] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
> [ 6.935444] hub 1-0:1.0: USB hub found
> [ 6.935463] hub 1-0:1.0: 1 port detected
> [ 6.936156] usbcore: registered new interface driver usb-storage
> [ 6.936293] usbcore: registered new interface driver ums-cypress
> [ 6.936436] usbcore: registered new interface driver ums-datafab
> [ 6.936572] usbcore: registered new interface driver ums-freecom
> [ 6.936708] usbcore: registered new interface driver ums-jumpshot
> [ 6.936844] usbcore: registered new interface driver ums-sddr09
> [ 6.936982] usbcore: registered new interface driver ums-sddr55
> [ 6.937450] mousedev: PS/2 mouse device common for all mice
>
> and it then successfully goes on to find the SD cards and USB
> attached disc. (This kernel has other problems such as no console
> output, and leaving the root filesystem mounted read-only, so using
> this isn't a solution).
>
> One difference relating to this is that the xilka kernel is built
> with CONFIG_USB_EHCI_HCD_ORION=y
> whereas the Fedora kernel is built with:
> CONFIG_USB_EHCI_HCD_ORION=m
>
> But I think the problem probably really lies in that there is no
>
usr/lib/modules/3.10.10-100.fc18.armv5tel.kirkwood/kernel/drivers/usb/host/ehci_orion.ko
> in my uinitrd-3.10.10-100.fc18.armv5tel.kirkwood, which I assume is
> related to ehci_orion having been moved to device tree support.
>
> Is my diagnosis likely to be correct, and if so, is there a simple
> way that I can fix it by rebuilding a uinitrd file (if so, what
> commands do I need to do it)? Are there likely to be any other
> drivers that ehci_orion.ko depends on that would also need to be
> included?
>
> Finally, should a new kernel package be produced that does include
> the ehci_orion driver? And if so, would it be helpful if I filed a
> bug.
>
> Just to confirm, the kernel is picking up the Dreamplug device
> tree, since I get the following message at the start of the boot
> sequence: [ 0.000000] Machine: Marvell Kirkwood (Flattened
> Device Tree), model: Globalscale Technologies Dreamplug
>
> Many thanks,
> Quentin
>
>
>
>
>
>
>
>
> _______________________________________________
> arm mailing list
> arm(a)lists.fedoraproject.org
>
https://admin.fedoraproject.org/mailman/listinfo/arm
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.21 (GNU/Linux)
iEYEARECAAYFAlI4az8ACgkQkSxm47BaWfe++ACgjC/xRfnd1y0UIq74Qyu/LMgB
n2YAn3vuAMWDHuty9AIqMrRd2hSxsMRE
=r1lA
-----END PGP SIGNATURE-----