HI Dennis

Examining your process stated below, did you really append the u-boot.dtb to the u-boot.bin file in the u-boot-dtb.bin file? Why did you concatenate them? That seems out of the norm. Why not just flash the u-boot.bin file provided by Fedora?

Regards,
Stewart

On 08/23/2017 08:43 AM, Dennis Gilmore wrote:

El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió:

Am 23.08.2017 um 16:20 schrieb Dennis Gilmore:
--

Hello Dennis,

that looks beautiful. You have a running Odroid-XU4 with actual
Kernel
with Fedora 26 !!

How did you manage it? I haven't so much luck with the installation.

Thanks
Andreas

I ran

xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB
cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin
cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin
I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4-v201
7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot
tzsw.bin.hardkernel and sd_fusing.sh
then ran 
sh sd_fusing.sh /dev/sdb
I used parted to resize partition 4 mounted it and ran xfs_growfs so it
filled the sd card

I mounted partition 2 and edited extlinux/extlinux.conf adding
cpuidle.off=1 to the append line. I did have to edit etc/passwd and
unlock the root account as initial-setup is not running.

of couse /dev/sdb was my sdcard, make sure you have the right device
for yours.  It does seem that the nic is not detected however.

Dennis

_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-leave@lists.fedoraproject.org